Luer taper

A syringe with a male Luer-Lock fitting, and a needle with female Luer-Lock fitting (purple) which screws into it

The Luer taper is a standardized system of small-scale fluid fittings used for making leak-free connections between a male-taper fitting and its mating female part on medical and laboratory instruments, including hypodermic syringe tips and needles or stopcocks and needles. Currently ISO 80369 governs the Luer standards and testing methods.[1]

Invented by Karl Schneider[2] and named after the 19th-century German medical instrument maker Hermann Wülfing Lüer, it originated as a 6% taper fitting for glass bottle stoppers (so one side is at 1.72 degrees to the centerline). Key features of Luer taper connectors are defined in the ISO 594 standards.[3] It is also defined in the DIN and EN standard 1707:1996[4] and 20594-1:1993.[5]

Variants

There are two varieties of Luer taper connections: locking and slipping.[6] Their trade names are confusingly similar to the nonproprietary names. "Luer-Lock" and "Luer-slip" are registered trademarks of Becton Dickinson. "Luer-Lock" style connectors are often generically referred to as "Luer lock", and "Luer-slip" style connectors may be generically referred to as "slip tip". Luer lock fittings are securely joined by means of a tabbed hub on the female fitting which screws into threads in a sleeve on the male fitting. The Luer lock fitting was developed in the United States by Fairleigh S. Dickinson. 'Luer lock' style connectors are divided into two types "one piece luer lock" and "two piece luer lock" or "rotating collar luer lock". One piece Luer lock comes as a single mold, and locking is achieved by rotating the entire luer connector or system. In two piece luer lock, a free rotating collar with threads is assembled to the luer and the locking is achieved by rotating the collar.

Slip tip (Luer-slip) fittings simply conform to Luer taper dimensions and are pressed together and held by friction (they have no threads). Luer components are manufactured from either metal or plastic and are available from many companies worldwide.

References

  1. ↑ "ISO 80369-7:2016 - Small-bore connectors for liquids and gases in healthcare applications -- Part 7: Connectors for intravascular or hypodermic applications".
  2. ↑ "The Life and Death of the Luer | MDDI Medical Device and Diagnostic Industry News Products and Suppliers". Mddionline.com. Retrieved 2017-03-06.
  3. ↑ "ISO 594-1:1986 - Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements". Iso.org. Retrieved 2017-03-06.
  4. ↑ DIN and EN standard 1707:1996 "Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings".
  5. ↑ DIN and EN 20594-1:1993 "Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment described".
  6. ↑ Ravin A. (1952) A Luer slip with a rotating lock. J. Lab Clin. Med. 39(1), S. 168 PMID 14889106.
This article is issued from Offline. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.