USP 800

USP 800 Hazardous Drugs - Handling in Healthcare Settings is a chapter of a book which provides guidance about the handling of hazardous drugs (HDs) in the healthcare setting. It was created by the United States Pharmacopeia Convention. USP 800 was published on February 1, 2016 and originally planned for implementation in December, 2019, but implementation has been delayed.[1]

Scope

USP 800 describes practice and quality standards for the handling of HDs involving but not limited to the receipt, storage, compounding, dispensing, administration, and disposal of sterile and non-sterile products. This chapter applies to any personnel who may be exposed to HDs. Personnel likely to be exposed may include pharmacists, pharmacy technicians, nurses, physician assistants, home healthcare workers, veterinarians, and veterinary technicians.[2]

Requirements

Facilities that handle HDs must follow the standards outlined in USP 800. At minimum the facilities's management system must include:

  • A list of HDs
  • Facility and engineering controls
  • Competent personnel
  • Safe work practices
  • Proper use of appropriate Personal Protective Equipment (PPE)
  • Policies for HD waste segregation and disposal[3]

List of hazardous drugs

The National Institute for Occupational Safety and Health (NIOSH) maintains a list of antineoplastic and HDs that are used in healthcare settings. The site must maintain a list of any drugs they use that are on the NIOSH list and it must be updated every 12 months. If the facility begins using a new medication on the NIOSH list it must be added to their HD list.

Responsibilities of people handling hazardous drugs

Each facility must have a designated person who develops, implements, and maintains USP 800 compliance. This person is also responsible for overseeing the training of personnel and reporting hazardous situations to the management team. All personnel who handle HDs must be trained on the fundamental practices and precautions to contain HDs.[4]

Facilities and engineering controls

HDs must be handled in ways to limit contamination. HD storage areas must be separated from break rooms and refreshment areas. Designated areas must be available for:

  • Receipt and unpacking
  • Storage of HDs
  • Non-sterile and sterile HD compounding [5]

Receipt

Antineoplastic HDs and all HD active pharmaceutical ingredients (APIs) must be unpacked in an area that is neutral/normal or negative pressure.[6]

Storage

HDs must be stored properly to prevent spillage or breakage. HDs should not be stored on the floor or areas prone to natural disaster such as earthquakes. Antineoplastic HDs that require further manipulation other than repackaging or counting must be stored separately from non-HDs. Sterile and non-sterile HDs must not be stored together. Refrigerated HDs must be stored in a dedicated refrigerator located in a negative pressure area.

References

  1. ↑ "What is USP <800>". Ready for <800>. Braun Medical. Retrieved 28 October 2019.
  2. ↑ USP 800 2019, p. 1.
  3. ↑ "USP General Chapter <800> Hazardous Drugs - Handling in the Healthcare Setting". www.usp.org. USP. Retrieved 28 October 2019.
  4. ↑ USP 800 2019, p. 3.
  5. ↑ USP 800 2019, p. 3.
  6. ↑ USP 800 2019, p. 3.
This article is issued from Offline. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.