I currently only have access to composite video screens, so I can't use HDMI which makes it a royal pain to use NOOBS.
I have NOOBS 1.3 and I wanted to try dual-booting a couple different OSs, but I can't get my Pi to register my keyboard (same problem as my other un-answered problem Using NOOBS, no keyboard.)
I have looked at these two pages so far NOOBS won't start and http://www.raspberrypi.org/phpBB3/viewtopic.php?t=56815&p=429218, but neither has been much help.
I have tried two separate keyboards, 1 that uses bluetooth and one that is wired. Both have been tried directly through the Pi and through a Plugable powered hub I have (4 port-is on the tested good list) and nothing happens with repeated 3 and 4 button presses. My Pi is a 512MB Rev 2 with a Transcend 8GB Class 10 SDHC Card.
Basically I was wondering if, because my keyboards don't get NOOBS to switch to composite (work in Raspbian and NOOBS only via HDMI), can I manually force NOOBS 1.3 to use Composite video instead?
Sorry about the long and somewhat confusifying post, but I really want to use NOOBS, especially the Dual-booting ability of 1.3.
Thanks!