2BB2 400

The 2BB2 400 class were two electric locomotives built in 1926 for the Paris Orléans (PO) railway of France.[1]

2BB2 400
Type and origin
Power typeElectric
BuilderGanz Works, Hungary
Serial numberE.401 E.402
Build date1926
Total produced2
Specifications
Configuration:
  Whyte4-4-4-4
  AAR2-B-B-2
  UIC(2'B)(B2')
Gauge1,435 mm (4 ft 8+12 in)
Adhesive weight72,100 kilograms (159,000 lb)
Loco weight131,690 kilograms (290,330 lb)
Electric system/s1,500 V DC overhead
Current pickup(s)2 roof-mounted pantographs
600 V third rail collector shoes for use in Paris tunnels
Traction motors4× 895 kilowatts (1,200 hp)
Performance figures
Maximum speed120 kilometres per hour (75 mph)
Power output4,800 horsepower (3,600 kW)
Tractive effort176 kilonewtons (40,000 lbf)
Career
OperatorsPO SNCF
Number in class2
NicknamesLes Belles Hongroisses
Axle load class18,000 kilograms (40,000 lb)

After wartime coal shortages during World War I, post-war reconstruction from 1919 focussed on electrification, powered by hydro electricity. In 1923 the PO began electrification of the 200 km section of the Toulouse main line from Paris to Vierzon using a supply of 1,500 V DC. The Ganz Works of Budapest, Hungary supplied these two locomotives, to the design of Kálmán Kandó.[1]

The arrangement of the locomotives was unusual for DC locomotives and may have been influenced by Kandó's other designs for AC locomotives, with the large diameter frame-mounted AC motors of the period. The four motors were mounted rigidly on the frames, above the driving wheels. Each motor drove an external jackshaft crank, with the four driving axles coupled in pairs. Drive between the motor jackshafts and the wheels was by coupling rods. As express passenger locomotives, this also permitted large diameter driving wheels, rather than small-wheeled bogies beneath the frames. Suspension travel between the driven wheels and the fixed motors was achieved through Kandó's triangular linkage design.[1][2][3]

The coupled wheels, rather than individual traction motors, encouraged resistance to wheelslip. This advantage was recognised and influenced future French designs, such as the typically French monomotor bogie rather than the axle-hung traction motors used elsewhere.[1]

In service, the locomotives proved fast and powerful, but were unreliable. When other passenger locomotives became available, they were restricted to freight work at up to 80 kilometres per hour (50 mph). Despite this they were popular with their crews, encouraged by the French practice of attaching crews to the same locomotive. They gained the class nickname, Les Belles Hongroisses.[1] Their later years were spent in freight-only service based at Limoges. They survived into SNCF service until 1938, keeping their original numbers, but were withdrawn and scrapped that year.[lower-roman 1]

Notes

  1. Some sources give 1942 as a scrapping date.

References

  1. Hollingsworth, Brian; Cook, Arthur (2000). "Ganz 2-B-B-2". Modern Locomotives. pp. 50–51. ISBN 0-86288-351-2.
  2. Doug Self (2014). "Jackshaft Locomotives". Unusual Locomotives.
  3. "Short history of the MÁV Class V40 "Kandó" Electric locomotives". Archived from the original on 2016-10-10. Retrieved 2016-07-16.
  • Davies, John. Chemins de fer du Midi and Chemins de fer de Paris à Orleans Locomotive List 1840–1938. Woodbridge, Queensland: Dr. John Davies. p. 200. ISBN 0-9585541-0-2.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.