ASTM F568M

ASTM F568M is an ASTM International standard for metric bolts, screws and studs that are used in general engineering applications. It is titled: Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners. It defines mechanical properties for fasteners that range from M1.6 to 100 in diameter. The standard was withdrawn in 2012.[1] and has been replaced by ISO 898-1[2]

This standard defines property classes, the metric equivalent of a screw grade, that are almost identical to those defined by ISO 898-1,[2] except for the addition of the 8.8.3 and 10.9.3 classes. These two additional standards are fasteners that have the same mechanical properties as their base property class (i.e. 8.8 and 10.9), but are made from weathering steel.[1][3] The standard is referenced by ASME B18.29.2M, which defines insert length selection for helical coil screw thread inserts.[4]

This is a standard set by the standards organization ASTM International, a voluntary standards development organization that sets technical standards for materials, products, systems, and services.

Mechanical properties
Head markings and mechanical properties[5]
Head markingGrade, material & conditionNominal thread diameter size range [mm]Proof strength [MPa]Yield strength (min) [MPa]Tensile strength (min) [MPa]Core hardness [Rockwell]
Class 4.6
Low or medium carbon steel		5–100225240400B67–95
Class 4.8
Low or medium carbon steel; fully or partially annealed		1.6–16310340420B71–95
Class 5.8
Low or medium carbon steel; cold worked		5–24380420520B82–95
Class 8.8[6]
Medium carbon steel; quench and tempered		Under 16 (inc.)580640800 C18-31
17–72600660830C23–34
Class 8.8 low carbon
Low carbon boron steel; quench and tempered
Class 8.8.3[1]
Atmospheric corrosion resistant steel; quench and tempered
Class 9.8
Medium carbon steel; quench and tempered		1.6–16650720900C28–37
Class 9.8 low carbon
Low carbon boron steel; quench and tempered
Class 10.9
Alloy steel; quench and tempered		5–1008309401040C32–39
Class 10.9 low carbon
Low carbon boron steel; quench and tempered
Class 10.9.3[1]
Atmospheric corrosion resistant steel; quench and tempered
Class 12.9
Alloy steel; quench and tempered		1.6–10097011001220C39–44

See also

References
  1. ASTM F568M - 07, retrieved 2009-06-10.
  2. ISO 898-1:2009, 2009-04-01, retrieved 2016-04-13.
  3. Bickford & Nassar 1998, p. 154.
  4. Machinery's Handbook (30 ed.). Industrial Press. 2016. pp. 1675, Section 62.4. Insert Length Selection.
  5. Metric Handbook, archived from the original on October 31, 2007, retrieved 2009-06-06.
  6. Bolt grade markings and strength chart, retrieved 2009-05-29.

Bibliography
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.