Alternate Instruction Set

The manufacturer describes the Alternate Instruction Set as "an extended set of integer, MMX, floating-point, and 3DNow! instructions along with additional registers and some more powerful instruction forms".[2] Every AIS instruction is prefixed with the 3-byte sequence 0x8D8400 followed by the 32-bit instruction; this prefix form for the AIS instructions makes them appear to be x86 Load Effective Address (LEA) instructions. In 2018 researcher Christopher Domas reported that the prefix 0x620405 (x86 BOUND) also worked.

A proposal made in 2002 to add AIS support to the Netwide Assembler (NASM) was partially declined in 2005, on the basis that NASM was an x86 assembler, and AIS is a separate instruction set.[4] An assembler is available from Domas's 2018 research.[5]

In 2007 a patent named some microcode instructions as load and store to/from main RAM, and loadPRAM and storePRAM to/from private-RAM inside the processor.[6] The Centaur Technologies verification team, in a 2014 paper about the VIA Nano, included some short lists of micro-instructions including ADDIG, JLINK, JMP_ALL, MVIG, NLOOPE, STORE_PRAM, plus micro-operations XADD and XSUB. Micro-operations were shown to have a format that includes the fields opcode, exec unit, src width, src1, src2, dest width, dest, write flags? and end routine?.[7]

A 2002 programming reference for the Alternate Instruction set[8] and an accompanying appnote[1] were added to the Bitsavers archive in May 2021.

From x86 mode, the availability of the Alternate Instruction Set can be detected by executing a CPUID with the EAX register set to 0xc0000001 and then examining the EDX register. If EDX bit 0 is set to 1, then AIS is supported. If EDX bit 1 is also set to 1, then AIS is enabled.[9] If AIS is supported by the CPU, then its status can be checked and altered through the Model-specific registers, by checking and setting the Feature Control Register (FCR, register 0x1107). If bit 0 ("ALTINST") is set to 1, then AIS is enabled.[9]

The Microsoft Windows NT kernel KiGetFeatureBits() initialisation function proactively disables Alternate Instruction mode on boot up.[10] If the x86 JMPAI jump instruction is executed when AIS mode is disabled, then the processor will generate an Invalid Instruction exception.[11] Setting the AIS-enabled bit requires privileged access, and should be set using a read-modify-write sequence.[11]

In 2018 Christopher Domas discovered that some Samuel 2 processors came with the Alternate Instruction Set enabled by default and that by executing AIS instructions from user space, it was possible to gain privilege escalation from Ring 3 to Ring 0.[5] Domas had partially reverse engineered the AIS instruction set using automated fuzzing against a cluster of seven thin clients.[12] Domas used the terms "deeply embedded core" (DEC) plus "deeply embedded instruction set" (DEIS) for the RISC instruction set, "launch instruction" for JMPAI, "bridge instruction" for the x86 prefix wrapper, "global configuration register" for the Feature Control Register (FCR), and documented the privilege escalation with the name "Rosenbridge".[5]

• NEC V20/V30, an x86-compatible CPU implementing a similar scheme to enter and exit into an alternate instruction set mode to support Intel 8080 instructions.