Angle bisector theorem

In geometry, the angle bisector theorem is concerned with the relative lengths of the two segments that a triangle's side is divided into by a line that bisects the opposite angle. It equates their relative lengths to the relative lengths of the other two sides of the triangle.

The theorem states that if DAB is congruent to DAC, then

Theorem

Consider a triangle ABC. Let the angle bisector of angle A intersect side BC at a point D between B and C. The angle bisector theorem states that the ratio of the length of the line segment BD to the length of segment CD is equal to the ratio of the length of side AB to the length of side AC:

and conversely, if a point D on the side BC of ABC divides BC in the same ratio as the sides AB and AC, then AD is the angle bisector of angle A.

The generalized angle bisector theorem states that if D lies on the line BC, then

This reduces to the previous version if AD is the bisector of BAC. When D is external to the segment BC, directed line segments and directed angles must be used in the calculation.

The angle bisector theorem is commonly used when the angle bisectors and side lengths are known. It can be used in a calculation or in a proof.

An immediate consequence of the theorem is that the angle bisector of the vertex angle of an isosceles triangle will also bisect the opposite side.

Proofs

There exist many different ways of proving the angle bisector theorem. A few of them are shown below.

Proof using similar triangles

Animated illustration of the angle bisector theorem.

As shown in the accompanying animation, the theorem can be proved using similar triangles. In the version illustrated here, the triangle gets reflected across a line that is perpendicular to the angle bisector , resulting in the triangle with bisector . The fact that the bisection-produced angles and are equal means that and are straight lines. This allows the construction of triangle that is similar to . Because the ratios between corresponding sides of similar triangles are all equal, it follows that . However, was constructed as a reflection of the line , and so those two lines are of equal length. Therefore, , yielding the result stated by the theorem.

Proof using Law of Sines

In the above diagram, use the law of sines on triangles ABD and ACD:

 

 

 

 

(1)

 

 

 

 

(2)

Angles ADB and ADC form a linear pair, that is, they are adjacent supplementary angles. Since supplementary angles have equal sines,

Angles DAB and DAC are equal. Therefore, the right hand sides of equations (1) and (2) are equal, so their left hand sides must also be equal.

which is the angle bisector theorem.

If angles DAB, ∠ DAC are unequal, equations (1) and (2) can be re-written as:

Angles ADB, ∠ ADC are still supplementary, so the right hand sides of these equations are still equal, so we obtain:

which rearranges to the "generalized" version of the theorem.

Proof using triangle altitudes

Let D be a point on the line BC, not equal to B or C and such that AD is not an altitude of triangle ABC.

Let B1 be the base (foot) of the altitude in the triangle ABD through B and let C1 be the base of the altitude in the triangle ACD through C. Then, if D is strictly between B and C, one and only one of B1 or C1 lies inside ABC and it can be assumed without loss of generality that B1 does. This case is depicted in the adjacent diagram. If D lies outside of segment BC, then neither B1 nor C1 lies inside the triangle.

DB1B, ∠ DC1C are right angles, while the angles B1DB, ∠ C1DC are congruent if D lies on the segment BC (that is, between B and C) and they are identical in the other cases being considered, so the triangles DB1B, △DC1C are similar (AAA), which implies that:

If D is the foot of an altitude, then,

and the generalized form follows.

Proof using triangle areas

A quick proof can be obtained by looking at the ratio of the areas of the two triangles BAD, △CAD, which are created by the angle bisector in A. Computing those areas twice using different formulas, that is with base g and altitude h and with sides a, b and their enclosed angle γ, will yield the desired result.

Let h denote the height of the triangles on base BC and be half of the angle in A. Then

and

yields

Exterior angle bisectors

exterior angle bisectors (dotted red):
Points D, E, F are collinear and the following equations for ratios hold:
, ,

For the exterior angle bisectors in a non-equilateral triangle there exist similar equations for the ratios of the lengths of triangle sides. More precisely if the exterior angle bisector in A intersects the extended side BC in E, the exterior angle bisector in B intersects the extended side AC in D and the exterior angle bisector in C intersects the extended side AB in F, then the following equations hold:[1]

, ,

The three points of intersection between the exterior angle bisectors and the extended triangle sides D, E, F are collinear, that is they lie on a common line.[2]

History

The angle bisector theorem appears as Proposition 3 of Book VI in Euclid's Elements. According to Heath (1956, p. 197 (vol. 2)), the corresponding statement for an external angle bisector was given by Robert Simson who noted that Pappus assumed this result without proof. Heath goes on to say that Augustus De Morgan proposed that the two statements should be combined as follows:[3]

If an angle of a triangle is bisected internally or externally by a straight line which cuts the opposite side or the opposite side produced, the segments of that side will have the same ratio as the other sides of the triangle; and, if a side of a triangle be divided internally or externally so that its segments have the same ratio as the other sides of the triangle, the straight line drawn from the point of section to the angular point which is opposite to the first mentioned side will bisect the interior or exterior angle at that angular point.

Applications

This theorem has been used to prove the following theorems/results:

References

  1. Alfred S. Posamentier: Advanced Euclidean Geometry: Excursions for Students and Teachers. Springer, 2002, ISBN 9781930190856, pp. 3-4
  2. Roger A. Johnson: Advanced Euclidean Geometry. Dover 2007, ISBN 978-0-486-46237-0, p. 149 (original publication 1929 with Houghton Mifflin Company (Boston) as Modern Geometry).
  3. Heath, Thomas L. (1956). The Thirteen Books of Euclid's Elements (2nd ed. [Facsimile. Original publication: Cambridge University Press, 1925] ed.). New York: Dover Publications.
    (3 vols.): ISBN 0-486-60088-2 (vol. 1), ISBN 0-486-60089-0 (vol. 2), ISBN 0-486-60090-4 (vol. 3). Heath's authoritative translation plus extensive historical research and detailed commentary throughout the text.

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.