BMW R1100GS

The BMW R1100GS is a dual-sport motorcycle that was launched in 1993, and manufactured from 1994 to 1999 by BMW Motorrad in Berlin, Germany.[2] The bike has a 1,085 cc (66.2 cu in) flat-twin (boxer) engine, first seen in the R1100RS which was launched the year before in 1992,[2] and was the first member of the GS family to use an air- and oil-cooled engine rather than the earlier air-cooled airhead engines which had been used on BMW motorcycles since the R32 in 1923.

BMW R1100GS
Red and white BMW R1100GS motorcycle with panniers
ManufacturerBMW Motorrad
Production1994–1999
PredecessorR100GS, R80GS
SuccessorR1150GS
ClassDual-sport
Engine1,085 cc (66.2 cu in) flat-twin, four valves per cylinder, oil-cooled[1]
Compression ratio: 10.3:1
Bore / stroke99.0 mm × 70.5 mm (3.90 in × 2.78 in)
Top speed121 mph (195 km/h)
Power80 hp (60 kW) @ 6,750 rpm
Torque97 N⋅m (72 lbf⋅ft) @ 5,250 rpm
Transmission5-speed shaft drive
SuspensionFront: BMW Telelever
Rear: Single spring / shock absorber
BrakesFront: Twin 305 mm disc
Rear: Single 276 mm disc
Optional ABS
TyresFront: 110/80-19
Rear: 150/70-17
Wheelbase1,509 mm (59.4 in)
DimensionsL: 2,189 mm (86.2 in)
W: 920 mm (36 in)
H: 1,366 mm (53.8 in)
Seat height840 mm (33 in) to 860 mm (34 in)
Weight243 kg (536 lb) (wet)
Fuel capacity25 L (5.5 imp gal; 6.6 US gal)
Oil capacity3.75 litres (0.82 imp gal; 0.99 US gal)
RelatedR850GS

A smaller capacity sister model, the 848 cc (51.7 cu in) R850GS, was produced from 1996 to 2001.

In 1999, the R1100GS was superseded by the R1150GS.

Technical features

Previous BMW motorcycles used the airhead engines such as the type 247 air-cooled flat-twin with two pushrod-activated valves per cylinder. The R1100GS engine introduced partial oil-cooling and four valves per cylinder operated by a single chain-driven camshaft. Motronic fuel injection was included instead of the carburettors found on earlier bikes. Rear suspension and driveshaft used the same Paralever swingarm system as the previous bikes, but with the addition of remote pre-load adjustment on the shock absorber.[3] Front suspension used a new A-arm system called Telelever.[4] Options included heated handlebar grips and ABS.

Notes

  1. Schneider & Koenigsbeck, pp. 207
  2. Schneider & Koenigsbeck, pp. 64
  3. Field, Greg (2003). Motorcyclist BMW Files: Selected Road Tests. MotorBooks/MBI Publishing Company. p. 177. ISBN 978-0-7603-1695-5.
  4. Schneider & Koenigsbeck, pp.67

References

  • Schneider, Hans-Jurgen; Koenigsbeck, Dr. Axel (2009). BMW GS Adventure Motorcycle A 30-Year Catalog. Parker House Publishing. ISBN 978-0-9796891-7-8.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.