Baltimore Gneiss
The Baltimore Gneiss is a Precambrian geological formation in the Piedmont region of Maryland, Pennsylvania, and Delaware.[1]
Baltimore Gneiss | |
---|---|
Stratigraphic range: Precambrian | |
Type | Geological formation |
Underlies | Setters Formation |
Lithology | |
Primary | Gneiss |
Other | Paragneiss and amphibolite |
Location | |
Region | Piedmont of eastern North America |
Country | United States |
Extent | Maryland |
Type section | |
Named for | Baltimore |
Characteristics
At least 95 percent of the Baltimore Gneiss can be described as quartzo-feldspathic gneiss of granodioritic to granitic composition, with the remaining 5 percent consisting of amphibolite. The age of the Baltimore Gneiss has been constrained to 1.0-1.1 Ga.[2]
Members
The Gneiss is homogeneous overall, but is recognized as having four subdivisions. These are the layered gneiss member, the augen gneiss member, the streaked-augen gneiss member, and the hornblende gneiss member. Additionally, the Baltimore Gneiss outcrops into three discrete masses of uniform, well-foliated to massive granitic gneiss referred to as the Slaughterhouse Gneiss.[2]
The layered gneiss member consists of dark and light layers of gneiss bearing biotite, microcline, quartz, and plagioclase, varying from biotite schist to quartzo-feldspathic granofels interlayered on a centimeter to decimeter scale.[1]
The augen gneiss member consists of two belts of fine to medium grained gneiss bearing biotite, microcline, quartz, and plagioclase, with abundant large ovoids (augen) consisting of microcline and/or quartz.[1]
The streaked-augen gneiss member consists of uniform, medium-grained biotite-microcline-quartz-plagioclase gneiss, with augen that have a "stretched" or "streaked" appearance.[1]
The hornblende gneiss member is similar to the layered gneiss member, but with hornblende-bearing dark gneiss accounting for about half of the outcrop area.[1]
The Slaughterhouse Gneiss weathers to a pinkish to orange color, and consists of relatively uniform, medium-grained microcline-quartz-plagioclase gneiss with muscovite, biotite, or both.[2]
Structure
Ellicott City Granite | |
Woodstock Granite | |
Baltimore Mafic Complex | Mt. Washington Complex |
Hollofield Formation | |
Aberdeen Metagabbro | |
Perry Hall Gneiss | |
Glenarm Group | Loch Raven Schist |
Oella Formation | |
Cockeysville Marble | |
Setters Formation | |
Baltimore Gneiss | |
Rock units of the Baltimore Terrane in the central Maryland Piedmont Province.[3] |
The Phoenix, Texas, Chattalolanee, and Towson gneiss anticlines in the Baltimore, Maryland area are all part of a refolded nappe system beneath the Towson anticline. The cores of these nappes consist of the Baltimore Gneiss. The Baltimore Gneiss has been affected by three deformation periods: the Grenvillian, known from radiometric age data, for which nearly all resulting structural features where destroyed or obstructed by later tectonic deformation; the Taconic-Acadian, which involved three phases of folding, amphibolite facies metamorphism, local migmatization, and the development of the gneiss's pervasive structural elements; and the Alleghanian-Palisades, which resulted in predominantly brittle faulting and open folding. The cause of the Grenvillian deformation is uncertain. The Taconic-Acadian deformation was caused by the collision of an ocean floor/island arc terrane with a continental margin or fringing microcontinent in the early Paleozoic. The Alleghanian-Pallisades deformation was caused by continental rifting in the early Mesozoic, and possibly late-Paleozoic trans-current plate motions.[4]
History
The name Baltimore Gneiss was first used by George Huntington Williams in 1892[5] to describe the variety of widely distributed gneisses in the Baltimore area.[2]
Usage
The Baltimore Gneiss has been used in the past as building stone in the Baltimore area. It is thought that some of the first buildings built in Baltimore in the 1700s were constructed of gneiss quarried from Jones Falls. In addition to use in buildings, gneiss from Jones Falls and Gwynn Falls quarries was used for foundations, roads, and curbstones in Baltimore. Some quarrymen referred to the gneiss as "blue stone" due to the blue-gray color of its fresh surface. The last building stone quarry in Baltimore closed in 1958.[6]
Type localities
The type locality of the Baltimore Gneiss as described by William Patrick Crowley of the Maryland Geological Survey in 1976 is defined as outcrops along Towson Run from Bellona Avenue to Towsontown Boulevard.[2] Formerly, the type locality was considered as referring to layered gneisses which outcrop along Jones Falls and Gwynns Falls in Baltimore City, however, chemical and textural analysis[7] followed by zircon age measurements[8] determined that these gneisses represent a distinct younger geologic unit.[2]
The type locality of the layered gneiss member includes stream cuts along Herring Run for 255 meters on either side of Arlington Avenue bridge near Morgan State University.[2]
The type locality of the augen gneiss member includes outcrops along Long Green Creek 385 meters southeast of Glenarm Road bridge.[2]
The type locality of the streaked-augen gneiss member includes outcrops along Merryman Branch 125 meters upstream from the Dulaney Valley Road bridge.[2]
The type locality of the hornblende gneiss member includes outcrops along an unnamed stream between Malvern Avenue and Boyce Avenue.[2]
The type locality of the Slaughterhouse Gneiss outcrops along the Slaughterhouse Branch southeast of the Baltimore Beltway (I-695).[2]
Notable outcrops
Some notable exposures of the Baltimore Gneiss in addition to the type localities mentioned above include outcrops along the Rapids Trail in the McKeldin Area of Patapsco Valley State Park and along roads around the Loch Raven Reservoir.[3]
References
- Crowley, William P.; Cleaves, Emery T. (1974). Geologic map of the Towson Quadrangle, Maryland (Map). 1:24000. Maryland Geological Survey.
- Crowley, William Patrick (1976). "The geology of the crystalline rocks near Baltimore and its bearing on the evolution of the eastern Maryland Piedmont". Report of Investigations No. 27. Maryland Geological Survey: 5.
- Means, John (2010). Roadside Geology of Maryland, Delaware, and Washington, D.C. Missoula, Montana: Mountain Press Publishing Company. p. 131. ISBN 9780878425709.
- Muller, Peter D.; Chapin, David A. (1984). "Tectonic evolution of the Baltimore Gneiss anticlines, Maryland". Geological Society of America. Geological Society of America Special Papers. Special Paper 194: 127–148. doi:10.1130/SPE194-p127. ISBN 9780813721941.
- Williams, George Huntington (1892). Guide to Baltimore with an Account of the Geology of its Environs and Three Maps. Baltimore: J. Murphy & Co. p. 92.
- Kuff, Karen R.; Brooks, James R. (1985). "Building Stones of Maryland". Maryland Geological Survey. Retrieved 31 August 2019.
- Hopson, C. A. (1964). The crystalline rocks of Howard and Montgomery Counties. Baltimore: Maryland Geological Survey.
- Tilston, G. R.; Doe, B. R.; Hopson, C.A. (1970). "Zircon age measurements in the Maryland Piedmont, with special reference to Baltimore Gneiss problems". Studies of Appalachian Geology: Central and Southern: 460.