Byker railway station

Byker was a railway station on the Riverside Branch, which ran between Byker and Willington Quay. The station served Byker in Newcastle upon Tyne.

For the Tyne and Wear Metro station, see Byker Metro station.

Byker
General information
LocationByker, Newcastle upon Tyne
England
Coordinates54.9775°N 1.5863°W / 54.9775; -1.5863
Grid referenceNZ266648
Platforms2
Other information
StatusDisused
History
Original companyNorth Eastern Railway
Pre-groupingNorth Eastern Railway
Post-groupingLondon and North Eastern Railway
Key dates
1884Opened as an unadvertised halt
1 March 1901Opened to the public
5 April 1954Closed

The station was opened as an unadvertised halt in 1884 by the North Eastern Railway. It was later opened to the public on 1 March 1901.[1] Prior to opening to the public, the station was known as Byker Platform.

The station was located on Roger Street off Heaton Park Road. Due to the station's proximity to nearby Heaton, ticket sales for Byker were, for most of the station's life, credited to Heaton.

History

The Newcastle and North Shields Railway received Royal Assent on 21 June 1836, with the line opening between Carliol Square and North Shields on 18 June 1839.[2] It ran along the north bank of the River Tyne, although due to the meandering course of the river, it ran some distance from the shoreline at the eastern end.

The branch line, which was designed to more closely follow the shoreline of the Tyne, serving the rapidly developing industries and communities, was authorised in 1871. It was built along a route "that consisted for the most part of tunnels, bridges, cuttings, retaining-walls, and embankments".[3]

The branch line opened on 1 May 1879.[4] The delay in opening the line reflected the scale of the engineering works required to build the many tunnels, cuttings and retaining walls. Despite being a loop line, the line was officially known as the Riverside Branch.[5]

In the early 1900s, tramway competition caused a rapid decline in the number of passengers using the North Eastern Railway's local services in North Tyneside. Therefore, in 1904, the branch line was electrified, using a 600 V DC third-rail system.[6]

Demise and closure

Between 1909 and 1948, an hourly all-day service ran on the line. In the late 1940s, passenger services on the branch were reduced to peak hours only, catering primarily for commuter traffic from the shipyards along the River Tyne.

Byker was the first station on the Riverside Branch to close to passengers, on 5 April 1954.[1] It was followed six years later, with the closure of St Anthonys on 12 September 1960.[7]

References
  1. Quick, Michael (2009). Railway Passenger Stations in Great Britain: A Chronology. Railway and Canal Historical Society. p. 101. ISBN 978-0901461575.
  2. Allen, Cecil J. (1974). The North Eastern Railway. London: Allan. pp. 81 and 82. ISBN 0-7110-0495-1. OCLC 1255585.
  3. Tomlinson, William Weaver (1914). The North Eastern Railway: Its Rise and Development. Newton Abbot: David and Charles.
  4. Allen, Cecil J. (1974). The North Eastern Railway. London: Allan. p. 115. ISBN 0-7110-0495-1. OCLC 1255585.
  5. Young, Alan (1999). Suburban Railways of Tyneside. ISBN 1-871944-20-1.
  6. Hoole, Kenneth (1974). A Regional History of the Railways of Great Britain: Volume IV, The North East. Newton Abbot: David and Charles. p. 204. ISBN 0-7153-6439-1. OCLC 643508708.
  7. Quick, Michael (2009). Railway Passenger Stations in Great Britain: A Chronology. Railway and Canal Historical Society. p. 351. ISBN 978-0901461575.
Preceding station   Disused railways   Following station
Manors
Line and station closed		   North Eastern Railway
Riverside Branch		   St. Peters
Line and station closed
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.