Caledonian Railway 264 Class

The Caledonian Railway 264 and 611 classes were 0-4-0 saddle tank locomotives designed by Dugald Drummond and built by Neilson and Company in 1885.[1][2] Later examples were built at St Rollox Works under the direction of John F. McIntosh in 1895, 1900, 1902 and 1908.[2][3][4]

Caledonian Railway 264 and 611 classes
264 Class loco 56039 shunting at Whiteinch Glasgow in 1958. Built in 1885 as CR 269, later LMS 16039 and BR 56039. Note converted wagon acting as coal tender.
Type and origin
Power typeSteam
DesignerDugald Drummond, John F. McIntosh
BuilderNeilson and Company, St. Rollox railway works
Build date1885, 1889, 1890, 1895, 1900, 1902, 1908
Total produced34
Specifications
Configuration:
  Whyte0-4-0ST
  UICB n2t
Gauge1,435 mm (4 ft 8+12 in)
Driver dia.3 ft 8 in (1.12 m)
Length22 ft 3+34 in (6.801 m)
Loco weight27.375 long tons (27.814 t)
Fuel typecoal
Water cap.800 imp gal (3,600 L; 960 US gal)
Boiler pressure140 psi (970 kPa)
Cylinderstwo Outside
Cylinder size14 in × 20 in (360 mm × 510 mm)
Performance figures
Tractive effort10,601 lbf (47.16 kN) factorofadhesion =
Career
OperatorsCR » LMS » BR
Same type also operated by other companies.
Class0F
NicknamesPug
Axle load classCR/LMS/BR: Route availability 2
LocaleScottish Region
Withdrawn1924–1962
DispositionAll scrapped

History

These small shunters remained in long service under the LMS (who gave all Neilson saddle locomotives the power class 0F, shared by many other types) and British Railways, with the last of the class withdrawn in 1962.[5][6] The two classes, sometimes referred to by the generic term "pugs", were mainly used as works shunters in the area around Glasgow, Scotland, often running with home-made tenders to improve their small coal capacity.[1][7] Like most 0-4-0 tanks of the period they had outside cylinders and inside slide valves driven by Stephenson valve gear. A number were later sold into private industry and several even made it as far south as Crewe where they acted as works shunters in British Railways days.[2] None have survived into preservation.

They are easily confused with the earlier 1882-built ex-North British Railway Class Y-9 (NBR Class G), also designed by Dugald Drummond to a similar saddle tank design, although the 264/611 are distinguished by a taller chimney and larger circular windows.[2] Both were originally commissioned from Drummond by Neilson & Co to a standard design and were used by North British, LNER and British Railways. One NBR Y-9 shunter (No. 42 68095) has been preserved at the Bo'ness and Kinneil Railway museum.[8]

Construction

Construction was spread over several years, and eventually totalled 34 locomotives, as follows:[9]

OrderBuiltNumbersQuantity
Y11885264–2718
Y221889615–6206
Y271890510–5156
Y431895611–44
Y631900621–66
Y681902627–82
Y881908431, 4632

All were built at the St Rollox Works of the Caledonian Railway. Orders Y1, Y22 and Y27 were placed by Dugald Drummond and formed the 264 Class; the remainder were ordered by John F. McIntosh and formed the 611 Class.[9]

Smokey Joe

Smokey Joe 0-4-0 model

Smokey Joe is a model steam locomotive based on the 264 which has been in the Hornby Railways range since 1983 and has been highly popular, being regarded as a "permanent fixture" by the company.[10] A 'starter'-level engine, it has also been the centrepiece of an eponymous train set in the Hornby range.[11] The model was featured in the main Hornby Range up to 2010 and was moved into the entry-level "RailRoad" range in 2011.[12]

Hornby's model has been in the Hornby range since 1980, initially in Caledonian Railway blue.[13] The simplified 1983 "Smokey Joe" version omits the wire handrails that had been present on earlier variants.[1] According to the 2011 Hornby Handbook, the model was originally launched as a "character" locomotive inspired by a Glaswegian engine which had "Smokey Joe" scrawled on its tank in chalk, an effect the model tries to replicate.[10]

The actual number 56025 was an early 264 class built in 1890 and for its working life was primarily based at St Rollox Works, where it was the works shunter until its withdrawal in 1960.[14] The livery of the model is based upon the mixed traffic livery of British Railways, black with red and white lining. Photographs of the original 56025 from 1955 show that instead of the graffiti, the engine had a lined saddle tank with an early British Railways "cycling lion" crest and, unlike the model, an enclosed footplate (as a works shunter, it would not have required a large quantity of coal). Most other members of the class were unlined black with an open footplate.[2]

The model is powered by a small, 12 V "HP motor" of the same type as used in Scalextric slot cars, as well as the Hornby models of the British Rail Class 06 and GWR 101 Class. As a result, the locomotive has drawn complaints from some hardcore railway modellers that the motor is too fast for the engine to be realistic, with poor low-speed response.[15] As a result, it is usually regarded as a children's toy or a beginners model, rather than a model for the serious collector and modeller.[15] It does not come with DCC capability, although can be converted.[16]

See also

References

  1. "Class history". Archived from the original on 9 March 2011. Retrieved 7 March 2011.
  2. "611 Caledonian Class 0-4-0" in The Observer's Book of Railway Locomotives of Great Britain (Warne & Co 1961), p.148
  3. MacLeod, A.B. The McIntosh locomotives of the Caledonian Railway, 1895-1914. (London, Ian Allan, 1948) p.44
  4. Caledonian Locomotives, www.steamindex.com
  5. Class 0F image, railuk.info
  6. Class 264 image
  7. Mackintosh, Jim (January 2007). ""Pugs", Horses and Men". The True Line. The Caledonian Railway Association (95): 7, 8. ISSN 0267-0852.
  8. NB Y-9 at the LNER Encyclopedia
  9. Baxter, Bertram (1984). Baxter, David (ed.). British Locomotive Catalogue 1825-1923, volume 4: Scottish and remaining English Companies in the LMS Group. Ashbourne: Moorland Publishing. pp. 75–76, 90.
  10. The Official Hornby Handbook 2011, p. 35
  11. Train set version
  12. Smokey Joe Archived 12 July 2011 at the Wayback Machine, Hornby website
  13. "The Collector - third edition" (PDF). Archived from the original (PDF) on 4 February 2010. Retrieved 6 September 2011., Hornby Railways, 1998
  14. 56025 information, railuk.info
  15. Review, newrailwaymodellers.co.uk
  16. R782 Smokey Joe decoder installation Archived 17 December 2010 at the Wayback Machine, Hornby.com
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.