China Railways SS7

The Shaoshan 7 (Chinese: 韶山7) is a type of electric locomotive used on the People's Republic of China's national railway system. They are widely used on electrified lines in the southwest part of China.

SS7 Electric Locomotive
韶山7型电力机车
SS7-0083, Zhegujiang railway station, December 2017
Type and origin
Power typeElectric
BuilderDatong Electric Locomotive Works
ModelSS7
Build date1992–2007
Total produced113
Specifications
Configuration:
  UICBo'Bo'Bo'
(Except SS7E use Co'Co)
Gauge1,435 mm (4 ft 8+12 in)
Wheelbase17,080 mm (56 ft 0 in)
Length22,016 mm (72 ft 2.8 in) (between coupler centers)
Width3,105 mm (10 ft 2.2 in)
Height4,700 mm (15 ft 5 in) ± 30 mm (1.2 in)
Axle load23 t (22.6 long tons; 25.4 short tons)
Electric system/s25 kV AC Catenary
Current pickup(s)Pantograph
TransmissionAC – DC
Performance figures
Maximum speed100 km/h (62 mph)
Power output4,800 kW (6,400 hp)
Tractive effort485 kN (109,000 lbf) (starting)
351 kN (79,000 lbf) (continuous)

Design

The design of SS7 was influenced by the 6K, an electric locomotive model imported from Japan.[1]

The first SS7 was built in 1992 in Datong. In 1997, SS7s were used in Nanning-Kunming Railway. However, SS7's frequent failure lead to Datong Electric Locomotive Works making improvements to SS7s. Failure was reduced to just four cases in one year in 2004.

SS7 Electric Locomotive was still produced as of 2007. Most of SS7s belong to Liuzhou Locomotive Depot, Nanning Railway Bureau.[2] The last two SS7s (8112 and 8113) belong to Xiaoyi-Liulin Railway, which is located in Shanxi.

Derivatives

Derivatives of SS7 include SS7B, SS7C, SS7D and SS7E.

SS7B

In 1997, Datong Electric Locomotive Works developed the SS7B Electric Locomotive. There were only two SS7Bs manufactured, both SS7Bs' each axis axle load 25 tons.[3]

At first, two SS7Bs belonged to Kunming Locomotive Depot, Kunming Railway Bureau. Later the two SS7Bs were transferred to Nanning Locomotive Depot, Nanning Railway Bureau. In 2005, SS7B-0001 was destroyed in an accident which happened on the Nanning-Kunming Railway.[4][5]

SS7C

In 1998, Datong Electric Locomotive Works and Zhuzhou Electric Locomotive Research Institute, Chengdu Locomotive and Rolling Stock Works developed SS7C Electric Locomotive. There were 171 SS7Cs manufactured.

SS7Cs' each axis axle load 22 tons, and support head-end power.

SS7D

In 1999, Datong Electric Locomotive Works and Zhuzhou Electric Locomotive Research Institute, Chengdu Locomotive and Rolling Stock Works developed SS7D Electric Locomotive. There were 59 SS7Ds manufactured, and belong to Xi'an Locomotive Depot, Xi'an Railway Bureau.

SS7D use lightweight design, each axis axle load 21 tons, and support head-end power. Its maximum speed is 170 km/h.

SS7E

In 2001, Datong Electric Locomotive Works and Dalian Electric Traction R & D Center, Dalian Locomotive & Rolling Stock Works developed the SS7E Electric Locomotive. There were 146 SS7Es manufactured.

SS7E use lightweight design, however its axle arrangement is Co'Co '. Each axis axle load 21 tons, and support head-end power. Its maximum speed is 170 km/h.

Named locomotive

  • SS7-0076, "May 4th's Red Flag" (Chinese: 五四红旗号).
  • SS7D-0631,"Steelers Iron Horse"(Chinese: 钢人铁马号).

Manufacturers

SS7s have been manufactured by several companies:

References


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.