Chrysler Valiant (VC)

The VC Valiant was longer and lower than any previous Australian Valiant model, but was essentially a facelift of the superseded AP6 model,[3] with Chrysler Australia photographs of early VC's showing them bearing the model designation AP7.[4] It featured a new grille, front bumper, bonnet and front mudguards.[2] Sedans had new rear styling with vertical taillights.[2] Wagons and utilities carried over the rear lights and panels from their AP6 predecessors,[3] with wagons receiving the new rear bumper and utilities carrying over the previous models bumperettes. The VC range displayed a greater degree of differentiation between models with the Valiant, Regal and V8 each having unique exterior decoration and trim.[5] Regal and V8 models had a chrome strip situated near the lower edge of the doors[2] and V8 models featured a vinyl roof, bucket seats and a floor mounted gear selector with full length centre console, as well as V8 badges on the rear roof pillar, bootlid, bonnet emblem and hubcaps.[2] V8 sedans also featured three horizontal chrome bars on the rear quarter panel. Front disc brakes were introduced as an option in November 1966.[6]

The VC series Valiant was offered in 4-door sedan, 5-door station wagon and 2-door coupe utility models.[2]

• Valiant 225 sedan[7] (VC-M41)
• Valiant 225 Safari wagon[7] (VC-M45)
• Valiant Regal sedan[7] (VC-H41)
• Valiant Regal Safari wagon[7] (VC-H45)
• Valiant 273 V8 sedan[7] (VC-P41)
• Valiant 273 V8 Safari wagon[7] (VC-P45)
• Valiant Wayfarer utility[2] (VC-M20)

• 
  Chrysler VC Valiant sedan
• 
  Chrysler VC Valiant sedan
• 
  Chrysler VC Valiant Safari wagon
• 
  Chrysler VC Valiant Safari wagon
• 
  Chrysler VC Valiant Regal sedan
• 
  Chrysler VC Valiant Regal sedan
• 
  Chrysler VC Valiant Regal Safari wagon
• 
  Chrysler VC Valiant Regal Safari wagon
• 
  Chrysler VC Valiant V8 sedan
• 
  Chrysler VC Valiant V8 sedan - note three horizontal chrome stripes on rear quarter panel to further differentiate V8 sedan from Regal
• 
  V8 hood ornament as fitted to VC Valiant V8s
• 
  V8 badge as fitted to VC Valiant V8 sedan rear roof pillars and wagon front guards.
• 
  V8 badge as fitted to VC Valiant V8 sedan boot lids
• 
  Chrysler VC Valiant V8 Safari wagon
• 
  Chrysler VC Valiant V8 Safari wagon
• 
  V8 badge as fitted to VC Valiant V8 wagon tailgates
• 
  Chrysler VC Valiant Wayfarer utility
• 
  Chrysler VC Valiant Wayfarer utility - note rear bumperettes carried over from the previous AP6 utility
• 
  225 cubic inch slant six as fitted to VC Valiant and Regal range

A 225 cu in (3.7 L) Straight-six engine was fitted to all models other than the 273 V8 sedan and wagon, which were powered by a 273 cu in (4.5 L) V8 engine.[8] Base models were available with either three speed manual transmission or three speed automatic transmission, whilst Regals and 273 V8s were fitted with a three speed automatic as standard.[2]

A total of 65,634 VC Valiants were built prior to its replacement by the VE Valiant range in 1967.[2]

Two VC Valiant V8 automatic sedans contested the 1966 Gallaher 500 endurance race at Mount Panorama, Bathurst, finishing first and second in Class D. They placed 10th and 11th outright, beaten only by the Morris Cooper S which filled the first nine places.[9]

Chrysler Australia produced 33 or 34 (actual figure is disputed) Valiant sedans with the base level trim, but equipped with the 273 V8, for use by Victoria and South Australia Police forces as high speed pursuit vehicles. These show in the production records as model code V41.[10] Regular production base model Valiants used model code M41, whilst regular production V8 with the luxury trim used model code P41. Externally they were identical to the regular six cylinder Valiant sedans, and had standard base trim level interiors instead of the luxury interior of the regular production V8s