Correlation attack

One example is the Geffe generator, which consists of three LFSRs: LFSR-1, LFSR-2, and LFSR-3. Let these registers be denoted as: ${\displaystyle x_{1}}$, ${\displaystyle x_{2}}$, and ${\displaystyle x_{3}}$, respectively. Then, the Boolean function combining the three registers to provide the generator output is given by ${\displaystyle F(x_{1},x_{2},x_{3})=(x_{1}\wedge x_{2})\oplus (\neg x_{1}\wedge x_{3})}$ (i.e. (${\displaystyle x_{1}}$ AND ${\displaystyle x_{2}}$) XOR (NOT ${\displaystyle x_{1}}$ AND ${\displaystyle x_{3}}$)). There are 2³ = 8 possible values for the outputs of the three registers, and the value of this combining function for each of them is shown in the table below:

Boolean function output table

${\displaystyle x_{1}}$	${\displaystyle x_{2}}$	${\displaystyle x_{3}}$	${\displaystyle F(x_{1},x_{2},x_{3})}$
0	0	0	0
0	0	1	1
0	1	0	0
0	1	1	1
1	0	0	0
1	0	1	0
1	1	0	1
1	1	1	1

Consider the output of the third register, ${\displaystyle x_{3}}$. The table above shows that of the 8 possible outputs of ${\displaystyle x_{3}}$, 6 are equal to the corresponding value of the generator output, ${\displaystyle F(x_{1},x_{2},x_{3})}$. In 75% of all possible cases, ${\displaystyle x_{3}=F(x_{1},x_{2},x_{3})}$. Thus LFSR-3 is 'correlated' with the generator. This is a weakness that may be exploited as follows:

An interception can be made on the cipher text ${\displaystyle c_{1},c_{2},c_{3},\ldots ,c_{n}}$ of a plain text ${\displaystyle p_{1},p_{2},p_{3},\ldots }$ which has been encrypted by a stream cipher using a Geffe generator as its keystream generator, i.e. ${\displaystyle c_{i}=p_{i}\oplus F(x_{1i},x_{2i},x_{3i})}$ for ${\displaystyle i=1,2,3,\ldots ,n}$, where ${\displaystyle x_{1i}}$ is the output of LFSR-1 at time ${\displaystyle i}$, etc. It's also possible that part of the plain text, e.g. ${\displaystyle p_{1},p_{2},p_{3},\ldots ,p_{32}}$, the first 32 bits of the plaintext (corresponding to 4 ASCII characters of text). This is not entirely improbable considering plain text is a valid XML file, for instance, the first 4 ASCII characters must be "<xml". Similarly, many file formats or network protocols have very standard headers or footers. Given the intercepted ${\displaystyle c_{1},c_{2},c_{3},\ldots ,c_{32}}$ and our known/guessed ${\displaystyle p_{1},p_{2},p_{3},\ldots ,p_{32}}$, we may easily find ${\displaystyle F(x_{1i},x_{2i},x_{3i})}$ for ${\displaystyle i=1,2,3,\ldots ,32}$ by XOR-ing the two together. This makes the 32 consecutive bits of the generator output easy to determine.

This enables a brute-force search of the space of possible keys (initial values) for LFSR-3 (assuming we know the tapped bits of LFSR-3, an assumption which is in line with Kerckhoffs' principle). For any given key in the key space, we may quickly generate the first 32 bits of LFSR-3's output and compare these to our recovered 32 bits of the entire generator's output. Because we have established earlier that there is a 75% correlation between the output of LFSR-3 and the generator, we know we have correctly guessed the key for LFSR-3 if approximately 24 of the first 32 bits of LFSR-3 output will match up with the corresponding bits of generator output. If we have guessed incorrectly, we should expect roughly half, or 16, of the first 32 bits of these two sequences to match. Thus we may recover the key for LFSR-3 independently of the keys of LFSR-1 and LFSR-2. At this stage we have reduced the problem of brute forcing a system of 3 LFSRs to the problem of brute forcing a single LFSR and then a system of 2 LFSRs. The amount of effort saved here depends on the length of the LFSRs. For realistic values, it is a very substantial saving and can make brute-force attacks very practical.

Observe in the table above that ${\displaystyle x_{2}}$ also agrees with the generator output 6 times out of 8, again a correlation of 75% correlation between ${\displaystyle x_{2}}$ and the generator output. We may begin a brute force attack against LFSR-2 independently of the keys of LFSR-1 and LFSR-3, leaving only LFSR-1 unbroken. Thus, we are able to break the Geffe generator with as much effort as required to brute force 3 entirely independent LFSRs. This means the Geffe generator is a very weak generator and should never be used to generate stream cipher keystreams.

Note from the table above that ${\displaystyle x_{1}}$ agrees with the generator output 4 times out of 8—a 50% correlation. We cannot use this to brute force LFSR-1 independently of the others: the correct key will yield output that agrees with the generator output 50% of the time, but on average so will an incorrect key. This represents the ideal situation from a security perspective—the combining function ${\displaystyle F(x_{1},x_{2},x_{3})}$ should be chosen so the correlation between each variable and the combining function's output is as close as possible to 50%. In practice, it may be difficult to find a function that achieves this without sacrificing other design criteria, e.g., period length, so a compromise may be necessary.

While the above example illustrates well the relatively simple concepts behind correlation attacks, it perhaps simplifies the explanation of precisely how the brute forcing of individual LFSRs proceeds. Incorrectly guessed keys will generate LFSR output that agrees with the generator output roughly 50% of the time because, given two random bit sequences of a given length, the probability of agreement between the sequences at any particular bit is 0.5. However, specific individual incorrect keys may well generate LFSR output that agrees with the generator output more or less often than exactly 50% of the time. This is particularly salient in the case of LFSRs whose correlation with the generator is not especially strong; for small enough correlations, it is certainly not outside the realm of possibility that an incorrectly guessed key will also lead to LFSR output that agrees with the desired number of bits of the generator output. Thus, it may not be possible to identify the unique key to that LFSR. It may be possible to identify a number of potential keys, however, which is still a significant breach of the cipher's security. Moreover, given a megabyte of known plain text, the situation would be substantially different. An incorrect key may generate LFSR output that agrees with more than 512 kilobytes of the generator output but is not likely to generate output that agrees with as much as 768 kilobytes of the generator output as a correctly guessed key would. As a rule, the weaker the correlation between an individual register and the generator output, the more known plain text is required to find that register's key with a high degree of confidence. Estimates of the length of known plain text required for a given correlation can be calculated using the binomial distribution.

The correlations which were exploited in the example attack on the Geoff generator are examples of what are called first order correlations: they are correlations between the value of the generator output and an individual LFSR. It is possible to define higher-order correlations in addition to these. For instance, it may be possible that while a given Boolean function has no strong correlations with any of the individual registers it combines, a significant correlation may exist between some Boolean function of two of the registers, e.g., ${\displaystyle x_{1}\oplus x_{2}}$. This would be an example of a second order correlation. Third order correlations and higher can be defined in this way.

Higher-order correlation attacks can be more powerful than single-order correlation attacks, however, this effect is subject to a "law of limiting returns". The table below shows a measure of the computational cost for various attacks on a keystream generator consisting of eight 8-bit LFSRs combined by a single Boolean function. Understanding the calculation of cost is relatively straightforward: the leftmost term of the sum represents the size of the key space for the correlated generators, and the rightmost term represents the size of the key space for the remaining generators.

Generator attack effort

Attack	Effort (size of keyspace)
Brute force	${\displaystyle 2^{8\times 8}=18446744073709551616}$
Single 1st order correlation attack	${\displaystyle 2^{8}+2^{7\times 8}=72057594037928192}$
Single 2nd order correlation attack	${\displaystyle 2^{2\times 8}+2^{6\times 8}=281474976776192}$
Single 3rd order correlation attack	${\displaystyle 2^{3\times 8}+2^{5\times 8}=1099528404992}$
Single 4th order correlation attack	${\displaystyle 2^{4\times 8}+2^{4\times 8}=8589934592}$
Single 5th order correlation attack	${\displaystyle 2^{5\times 8}+2^{3\times 8}=1099528404992}$
Single 6th order correlation attack	${\displaystyle 2^{6\times 8}+2^{2\times 8}=281474976776192}$
Single 7th order correlation attack	${\displaystyle 2^{7\times 8}+2^{8}=72057594037928192}$

While higher-order correlations lead to more powerful attacks, they are also more difficult to find, as the space of available Boolean functions to correlate against the generator output increases as the number of arguments to the function does.

A Boolean function ${\displaystyle F(x_{1},\ldots ,x_{n})}$ of n variables is said to be "m-th order correlation immune", or to have "mth order correlation immunity" for some integer m, if no significant correlation exists between the function's output and any Boolean function of m of its inputs. For example, a Boolean function that has no first-order or second-order correlations, but which does have a third-order correlation exhibits 2nd order correlation immunity. Obviously, higher correlation immunity makes a function more suitable for use in a keystream generator (although this is not the only thing that needs to be considered).

Siegenthaler showed that the correlation immunity m of a Boolean function of algebraic degree d of n variables satisfies ${\displaystyle m+d\leq n}$; for a given set of input variables, this means that a high algebraic degree will restrict the maximum possible correlation immunity. Furthermore, if the function is balanced then ${\displaystyle m\leq n-1}$.[1]

It follows that it is impossible for a function of n variables to be nth order correlation immune. This also follows from the fact that any such function can be written using a Reed-Muller basis as a combination of XORs of the input functions.