Deorbit of Mir

Mir three years before deorbit

After the construction of the International Space Station began in 1998, Russian resources were split between the two stations.[2][3][4] In 2000, Roscosmos signed an agreement with MirCorp to lease the station for commercial use,[5] with the Soyuz TM-30 mission, intended to prepare the station for future use and conduct some commercial research, being flown later that year.[6] This was to have been followed by more missions, including flights with space tourists. Due to the Russian government being concerned about MirCorp's ability to fund these missions, Roscosmos decided against funding the continued operation of Mir.[2][3]

In November 2000, Roscosmos decided to deorbit Mir,[7] and the next month Russian Prime Minister Mikhail Kasyanov signed an order to do so.[8] By this stage Mir was well past the end of its design life,[9] and Roscosmos General Director Yuri Koptev believed that "any of its systems could well fail at any time".[7] Therefore, it was decided to deorbit it while it was still functioning rather than risk it falling back to Earth out of control, like Skylab in 1979[10] and Salyut 7 in 1991, potentially dropping debris over a populated area.[3]

External video
An animation showing the deorbiting process.

The Mir Deorbit Monitoring Group, whose members were located in the Russian Mission Control Center (RMCC) and ESOC, was monitoring the whole dynamic phase of operation. Both RMCC control rooms in Moscow were used for the massive media presence during the final stages of operation.[11] Real-time reports from RMCC were provided via teleconference during each deorbit burn to ESA spokespersons and representatives from national agencies. Video transmissions from RMCC were also made available to ESOC.

Two out of three Progress M1-5 propulsion firings, at approximately 90 minute intervals, were used to bring the perigee of Mir down to an altitude of 160 kilometres (99 mi) above the Earth's surface.[12] A tough contact with the atmosphere occurred at 100 kilometres (62 mi) altitude, when some of the external light elements of Mir were torn off due to the rush through the rarefied air.[12] At an altitude of 90 kilometres (56 mi) sufficient heating from Mir's hull created a glowing halo of hot plasma.[12] At about that time, the orbital complex broke apart and several of Mir's elements, surrounded by the plasma, were visible from Fiji against the evening sky.[12] Television pictures were transmitted around the world within a few minutes of the event.[12] The entire process lasted from about 16:20 to 20:29 local solar time. A short press conference was held in RMCC to cover the final stage of deorbit.

An official statement announced that Mir "ceased to exist" at 05:59:24 GMT. The final tracking of Mir was conducted by a United States Army site on Kwajalein Atoll.[13] The European Space Agency, German Federal Ministry of Defence and NASA also assisted with tracking Mir during its final orbit and reentry.[14][15]

At the time, Mir was the largest spacecraft ever to reenter the Earth's atmosphere, and there were concerns that sizeable pieces of debris, particularly from the docking assemblies, gyrodynes and external structure, could survive reentry.[16] Amid debris fall, New Zealand issued international warnings to ships and aircraft traveling in the South Pacific area.[17] Deputy director of New Zealand's Maritime Safety Authority, Tony Martin, said that the chances of debris hitting ships would be very small.[17] A similar situation occurred in Japan, whose residents were warned to stay indoors during the forty-minute period when debris was most likely to fall. The local officials admitted that the chances of an accident were very low.[17] The location of Mir announced after re-entry was 40°S 160°W / -40; -160 (Mir impact site) in the South Pacific Ocean. The debris spread about ±1,500 kilometres (930 mi) along track and ±100 kilometres (62 mi) laterally, reduced from the earlier estimate due to the steeper re-entry angle.[12]

• Animated coverage of deorbit