Douglas DT

The Douglas DT bomber was the Douglas Aircraft Company's first military contract, forging a link between the company and the United States Navy. Navy Contract No. 53305 of April 1, 1921, required only 18 pages to set out the specifications that resulted in the purchase of three DT (D for Douglas, T for torpedo) folding-wing aircraft.

DT
Douglas DT-2 launched from USS Langley, San Diego, California
Role Torpedo bomber
Manufacturer Douglas Aircraft Company
First flight November 1921
Primary user United States Navy
Produced 1921–1929
Number built 90
Variants Douglas World Cruiser

The DT used a welded steel fuselage with aluminum covering the forward and center sections and fabric covering the rear section. Douglas built 46 DT-1 and DT-2 torpedo bombers for the U.S. Navy, Norwegian Navy, and Peruvian Navy. 20 DT-2 aircraft were built under license by the L-W-F Engineering Company Inc., six by the Naval Aircraft Factory (NAF), and 11 by the Dayton-Wright Company. Another seven were built for Norway under license by Marinens Flyvebåtfabrik. Although still in service when the Germans invaded Norway, the Norwegian DTs did not see action in the Norwegian Campaign. The DT could be fitted either with pontoons or wheeled landing gear and could carry a 1,800 lb (816 kg) torpedo.

The first flight was in November 1921 and production continued until 1929. The DT operated off the U.S. Navy's first aircraft carrier, USS Langley, from land bases, and from seaplane tenders. Several were flown by the Marine Corps.

Variations of the DT-2 aircraft were designated DT-4, DT-5, DT-6, and DTB. Machines licence-built by Dayton-Wright were internally designated SDW by that company. The type became the basis for the Douglas World Cruiser.

Variants

DT-1
Preproduction prototypes; three built.
Douglas DT-2 at Langley
DT-2
Two-seat torpedo-bomber biplane, powered by a 450 hp (340 kW) Liberty V-12 piston engine; 64 built.
DT-3
Proposed version of the DT-2. Not built.
DT-4
Four DT-2s converted into bomber aircraft by the Naval Aircraft Factory. The aircraft were fitted with direct-drive Wright T-2 V-12 engines.
DT-5
Redesignation of two DT-4s fitted with a geared 650 hp (480 kW) Wright T-2B V-12 engine.
DT-6
One DT-2 aircraft fitted with a 450 hp (340 kW) Wright P-1 radial piston engine.
DT-2B
This designation was given to one DT-2 aircraft supplied to the Norwegian government. Seven similar aircraft were built under licence in Norway.
DTB
Export version for Peru. Four aircraft built for the Peruvian navy, fitted with 650 hp (480 kW) Wright Typhoon V-12 piston engines.
SDW-1
Redesignation of three DT-2s modified by the Dayton-Wright company.

Operators

A Douglas DT of the U.S. Navy dropping a torpedo.
 Norway
 Peru
 United States

Specifications (DT-2 floatplane)

Data from McDonnell Douglas Aircraft since 1920 Vol.1.[1]

General characteristics

  • Crew: two
  • Length: 38 ft 9 in (11.8 m)
  • Wingspan: 51 ft 10 in (15.8 m)
  • Height: 15 ft 1 in (4.60 m)
  • Wing area: 707 sq ft (65.7 m2)
  • Empty weight: 4,528 lb (2,054 kg)
  • Gross weight: 7,293 lb (3,308 kg)
  • Powerplant: 1 × Liberty L-12 V-12 water-cooled piston engine, 450 hp (340 kW)
  • Propellers: 2-bladed wooden propeller

Performance

  • Maximum speed: 100 mph (160 km/h, 87 kn)
  • Range: 274 mi (441 km, 238 nmi)
  • Service ceiling: 7,400 ft (2,300 m)
  • Rate of climb: 345 ft/min (1.75 m/s)
  • Time to altitude: 14.5 min to 5,000 ft (1,524 m)
  • Wing loading: 10.3 lb/sq ft (50 kg/m2)
  • Power/mass: 0.0617 hp/lb (0.1 kW/kg)

Armament

See also

Related development

References

  1. Francillon, Rene J. (1988). McDonnell Douglas Aircraft since 1920. Vol. 1 (2nd revised ed.). London: Putnam & Company Ltd. pp. 45–55. ISBN 0-87021-428-4.

Media related to Douglas DT at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.