Dyne
The dyne (symbol: dyn; from Ancient Greek δύναμις (dúnamis) 'power, force') is a derived unit of force specified in the centimetre–gram–second (CGS) system of units, a predecessor of the modern SI.
| dyne | |
|---|---|
| Unit system | CGS units |
| Unit of | force |
| Symbol | dyn |
| Conversions | |
| 1 dyn in ... | ... is equal to ... |
| CGS base units | 1 g⋅cm/s2 |
| SI units | 10−5 N |
| British Gravitational System | 2.248089×10−6 lbf |
History
The name dyne was first proposed as a CGS unit of force in 1873 by a Committee of the British Association for the Advancement of Science.[1]
Definition
The dyne is defined as "the force required to accelerate a mass of one gram at a rate of one centimetre per second squared".[2] An equivalent definition of the dyne is "that force which, acting for one second, will produce a change of velocity of one centimetre per second in a mass of one gram".[3]
One dyne is equal to 10 micronewtons, 10−5 N or to 10 nsn (nanosthenes) in the old metre–tonne–second system of units.
- 1 dyn = 1 g⋅cm/s2 = 10−5 kg⋅m/s2 = 10−5 N
- 1 N = 1 kg⋅m/s2 = 105 g⋅cm/s2 = 105 dyn
| newton | dyne | kilogram-force, kilopond |
pound-force | poundal | |
|---|---|---|---|---|---|
| 1 N | ≡ 1 kg⋅m/s2 | = 105 dyn | ≈ 0.10197 kp | ≈ 0.22481 lbf | ≈ 7.2330 pdl |
| 1 dyn | = 10–5 N | ≡ 1 g⋅cm/s2 | ≈ 1.0197×10−6 kp | ≈ 2.2481×10−6 lbf | ≈ 7.2330×10−5 pdl |
| 1 kp | = 9.80665 N | = 980665 dyn | ≡ gn × 1 kg | ≈ 2.2046 lbf | ≈ 70.932 pdl |
| 1 lbf | ≈ 4.448222 N | ≈ 444822 dyn | ≈ 0.45359 kp | ≡ gn × 1 lb | ≈ 32.174 pdl |
| 1 pdl | ≈ 0.138255 N | ≈ 13825 dyn | ≈ 0.014098 kp | ≈ 0.031081 lbf | ≡ 1 lb⋅ft/s2 |
| The value of gn as used in the official definition of the kilogram-force (9.80665 m/s2) is used here for all gravitational units. | |||||
Use
The dyne per centimetre is a unit traditionally used to measure surface tension. For example, the surface tension of distilled water is 71.99 dyn/cm at 25 °C (77 °F).[4] (In SI units this is 71.99×10−3 N/m or 71.99 mN/m.)
References
- Thomson, Sir Wl; Professor GC, Foster; Maxwell, Professor JC; Stoney, Mr GJ; Professor Flemming, Jenkin; Siemens, Dr; Bramwell, Mr FJ (September 1873). Everett, Professor (ed.). First Report of the Committee for the Selection and Nomenclature of Dynamical and Electrical Units. Forty-third Meeting of the British Association for the Advancement of Science. Bradford: Johna Murray. p. 224. Retrieved 8 April 2012.
- Gyllenbok, Jan (11 April 2018). "dyne". Encyclopaedia of Historical Metrology, Weights, and Measures, Volume 1. Birkhäuser. p. 90. ISBN 9783319575988. Retrieved 20 April 2018.
- Dyne. 1914.
{{cite encyclopedia}}:|work=ignored (help) - Haynes, W.M.; Lide, D. R.; Bruno, T.J., eds. (2015). "Surface tension of common liquids". CRC Handbook of Chemistry and Physics (96nd ed.). CRC Press. p. 6-181. ISBN 9781482260977.