Frit

A frit is a ceramic composition that has been fused, quenched, and granulated. Frits form an important part of the batches used in compounding enamels and ceramic glazes; the purpose of this pre-fusion is to render any soluble and/or toxic components insoluble by causing them to combine with silica and other added oxides.[1] However, not all glass that is fused and quenched in water is frit, as this method of cooling down very hot glass is also widely used in glass manufacture.

"Frits" redirects here. For the given name, see Frits (given name).
Look up frit in Wiktionary, the free dictionary.
Frit

According to the OED, the origin of the word "frit" dates back to 1662 and is "a calcinated mixture of sand and fluxes ready to be melted in a crucible to make glass". Nowadays, the unheated raw materials of glass making are more commonly called "glass batch".

In antiquity, frit could be crushed to make pigments or shaped to create objects. It may also have served as an intermediate material in the manufacture of raw glass. The definition of frit tends to be variable and has proved a thorny issue for scholars. In recent centuries, frits have taken on a number of roles, such as biomaterials and additives to microwave dielectric ceramics. Frit in the form of alumino-silicate can be used in glaze-free continuous casting refractories.

Ancient frit

Archaeologists have found evidence of frit in Egypt, Mesopotamia, Europe, and the Mediterranean.[2] The definition of frit as a sintered, polycrystalline, unglazed material can be applied to these archaeological contexts.[3][4][5] It is typically colored blue or green.

Blue frit

Blue frit, also known as Egyptian blue, was made from quartz, lime, a copper compound, and an alkali flux, all heated to a temperature between 850 and 1000 °C.[6] Quartz sand may have been used to contribute silica to the frit.[7] The copper content must be greater than the lime content in order to create a blue frit.[8] Ultimately the frit consists of cuprorivaite (CaCuSi4O10) crystals and "partially reacted quartz particles bonded together" by interstitial glass.[9] Despite an argument to the contrary, scientists have found that, regardless of alkali content, the cuprorivaite crystals develop by "nucleation or growth within a liquid or glass phase".[10] However, alkali content—and the coarseness of the cuprorivaite crystals—contribute to the shade of blue in the frit.[11] High alkali content will yield "a large proportion of glass". thereby diluting the cuprorivaite crystals and producing lighter shades of blue.[11] Regrinding and resintering the frit will create finer cuprorivaite crystals, also producing lighter shades.[11]

The earliest appearance of blue frit is as a pigment on a tomb painting at Saqqara dated to 2900 BC, though its use became more popular in Egypt around 2600 BC.[9] Blue frit has also been uncovered in the royal tombs at Ur from the Early Dynastic III period.[12] Its use in the Mediterranean dates to the Thera frescoes from the Late Middle Bronze Age.[13]

While the glass phase is present in blue frits from Egypt, scientists have not detected it in blue frits from the Near East, Europe, and the Aegean.[14] Natural weathering, which is also responsible for the corrosion of glasses and glazes from these three regions, is the likely reason for this absence.[14][15]

At Amarna, archaeologists have found blue frit in the form of circular cakes, powder residues, and vessel fragments.[16] Analysis of the microstructures and crystal sizes of these frits has allowed Hatton, Shortland, and Tite to deduce the connection among the three materials. The cakes were produced by heating the raw materials for frit, then they were ground to make powders, and finally, the powders were molded and refired to create vessels.[17]

In On Architecture, the first century BC writer Vitruvius reports the production of 'caeruleum' (a blue pigment) at Pozzuoli, made by a method used in Alexandria, Egypt.[18] Vitruvius lists the raw materials for caeruleum as sand, copper filings, and 'nitrum' (soda).[11] In fact, analysis of some frits that date to the time of Thutmose III and later show the use of bronze filings instead of copper ore.[11]

Stocks suggests that waste powders from the drilling of limestone, combined with a minor concentration of alkali, may have been used to produce blue frits.[19] The powders owe their copper content to the erosion of the copper tubular drills used in the drilling process.[20] However, the archaeological record has not yet confirmed such a relationship between these two technologies.

Green frit

Evidence of the use of green frit is so far confined to Egypt.[16] Alongside malachite, green frit was usually employed as a green pigment.[21] Its earliest occurrence is in tomb paintings of the 18th dynasty, but its use extends at least to the Roman period.[22] The manufacture of green and blue frit relies on the same raw materials, but in different proportions.[9] To produce green frit, the lime concentration must outweigh the copper concentration.[23] The firing temperature required for green frit may be slightly higher than that of blue frit, in the range of 950 to 1100 °C.[9] The ultimate product is composed of copper-wollastonite ([Ca,Cu]3Si3O9) crystals and a "glassy phase rich in copper, sodium, and potassium chlorides".[24] In certain circumstances (the use of a two-step heating process, the presence of hematite), scientists were able to make a cuprorivaite-based blue frit that later became a copper-wollastonite-based green frit at a temperature of 1050 °C.[25] On some ancient Egyptian wall paintings, pigments that were originally blue are now green: the blue frit can "devitrify" so that the "copper wollastonite predominates over the lesser component of cuprorivaite".[13] As with blue frit, Hatton, Shortland, and Tite have analyzed evidence for green frit at Amarna in the form of cakes, powders, and one vessel fragment and inferred the sequential production of the three types of artifacts.[17]

Relationships between frit, glass and faience

An Akkadian text from Assurbanipal's library at Nineveh suggests that a frit-like substance was an intermediate material in the production of raw glass.[26] This intermediate step would have followed the grinding and mixing of the raw materials used to make glass.[27] An excerpt of Oppenheim's translation of Tablet A, Section 1 of the Nineveh text reads:

You keep a good and smokeless fire burning until the 'metal' [molten glass] becomes fritted. You take it out and allow it to cool off.[28]

The steps that follow involve reheating, regrinding and finally gathering the powder in a pan.[28] Following the Nineveh recipe, Brill was able to produce a "high quality" glass.[29] He deduced that the frit intermediate is necessary so that gases will evolve during this stage and the end product will be virtually free of bubbles.[30] Furthermore, grinding the frit actually expedites the "second part of the process, which is to … reduce the system to a glass".[31]

Moorey has defined this intermediate step as "fritting", "a process in which the soluble salts are made insoluble by breaking down the carbonates, etc. and forming a complex mass of sintered silicates".[32] A frit preserved in a "fritting pan fragment" kept in the Petrie Museum "shows numerous white flecks of unreacted silica and a large number of vesicles where gases had formed".[33] The process was known to ancient writers Pliny and Theophilus.[33]

But whether this "fritting" was done in antiquity as a deliberate step in the manufacture of raw glass remains questionable. The compositions of frits and glasses recovered from Amarna do not agree in a way that would imply frits were the immediate precursors of glasses: the frits have lower concentrations of soda and lime and higher concentrations of cobalt and alumina than the glasses have.[34]

Scholars have suggested several potential connections between frit and faience. Kühne proposes that frit may have acted as the "binding agent for faience" and suggests that this binder was composed predominantly of silica, alkali and copper with minor concentrations of alkali earths and tin.[35] But analysis of a wide array of Egyptian frits contradicts the binder composition that Kühne offers.[36] Vandiver and Kingery argue that one method of producing a faience glaze was to "frit or melt the glaze constituents to form a glass", then grind the glass and form a slurry in water, and finally apply the glaze “by dipping or painting.”[37] However, their use of "frit" as virtually synonymous with "melt" represents yet another unique take on what a "frit" would constitute. Finally, Tite et al. report that frits, unusually colored blue by cobalt, found in "fritting pans" at Amarna have compositions and microstructures similar to that of vitreous faience, a higher-temperature form of Egyptian faience that incorporated cobalt into its body.[38] In their reconstruction of the manufacture of vitreous faience, Tite et al. propose that the initial firing of raw materials at 1100–1200 °C produces a cobalt-blue frit, which is then ground, molded, and glazed.[34]

In general, frits, glasses and faience are similar materials: they are all silica-based but have different concentrations of alkali, copper and lime.[39] However, as Nicholson states, they are distinct materials because "it would not be possible to turn faience into frit or frit into glass simply by further, or higher temperature, heating".[40]

The use of frit as pigments and as entire objects does give credence to the idea that frit-making was, to some extent, a "specialized" industry.[41] Indeed, scientists have determined that frit objects, such as amulets, beads and vessels, have chemical compositions similar to those of powder frits designed for use as pigments.[42] Nevertheless, determining the exact technical relationships among the frit, glass and faience industries is an area of current and, likely, future scholarly interest. The excavations at Amarna offer a spatial confirmation of these potential relationships, as the frit, glass and faience industries there were located "in close proximity" to one another.[43]

Fritware

Fritware refers to a type of pottery which was first developed in the Near East, where production is dated to the late first millennium AD through the second millennium AD. Frit was a significant ingredient. A recipe for "fritware" dating to c. 1300 AD written by Abu’l Qasim reports that the ratio of quartz to "frit-glass" to white clay is 10:1:1.[44] This type of pottery has also been referred to as "stonepaste" and "faience" among other names.[45] A ninth-century corpus of "proto-stonepaste" from Baghdad has "relict glass fragments" in its fabric.[46] The glass is alkali-lime-lead-silica and, when the paste was fired or cooled, wollastonite and diopside crystals formed within the glass fragments.[47] The lack of "inclusions of crushed pottery" suggests these fragments did not come from a glaze.[48] The reason for their addition would have been to release alkali into the matrix on firing, which would "accelerate vitrification at a relatively low firing temperature, and thus increase the hardness and density of the [ceramic] body".[48] Whether these "relict glass fragments" are actually "frit" in the more ancient sense remains to be seen.

Iznik pottery was produced in Ottoman Turkey as early as the 15th century AD.[49] It consists of a body, slip, and glaze, where the body and glaze are "quartz-frit".[50] The "frits" in both cases "are unusual in that they contain lead oxide as well as soda"; the lead oxide would help reduce the thermal expansion coefficient of the ceramic.[51] Microscopic analysis reveals that the material that has been labeled "frit" is "interstitial glass" which serves to connect the quartz particles.[52] Tite argues that this glass was added as frit and that the interstitial glass formed on firing.[53]

Frit was also a significant component in some early European porcelains. Famous manufacturers of the 18th century included Sèvres in France, and at Chelsea, Derby, Bow, Worcester and Longton Hall in England.[1][54] Frit porcelain is produced at Belleek, County Fermanagh, Northern Ireland. This factory, established in 1857, produces ware that is characterised by its thinness, slightly iridescent surface and that the body is formulated with a significant proportion of frit.[1]

A small manufacturing cluster of fritware exists around Jaipur, Rajasthan in India, where it is known as 'Blue Pottery' due its most popular glaze. The technique may have arrived in India with the Mughals,[55] with production in Jaipur dating to at least as early as the 17th century.[56][57]

Modern frit
The mirrored facade of a building is seen with a stainless steel nameplate reading Anchorage Museum.
The facade of the Anchorage Museum in Anchorage, Alaska, incorporates a large amount of custom insulated fritted glass.

Frits are indispensable constituents of most industrial ceramic glazes which mature at temperatures below 1150 °C.[58] Frits are typically intermediates in the production of raw glass, as opposed to pigments and shaped objects,[59] but they can be used as laboratory equipment in a number of high-tech contexts.

Frits made predominantly of silica, diboron trioxide (B2O3) and soda are used as enamels on steel pipes.[60] Another type of frit can be used as a biomaterial, which is a material made to become a part of, or to come into intimate contact with, one or more living organisms. Molten soda-lime-silica glass can be "poured into water to obtain a frit", which is then ground to a powder.[61] These powders can be used as "scaffolds for bone substitutions".[61] Also, certain frits can be added to high-tech ceramics: such frits are made by milling zinc oxide (ZnO) and boric acid (H3BO3) with zirconium (Zr) beads, then heating this mixture to 1100 °C, quenching it, and grinding it.[62] This frit is then added to a lithium titanate (Li2TiO3) ceramic powder, which enables the ceramic to sinter at a lower temperature while still keeping its “microwave dielectric properties."[62]

In laboratory and industrial chemical process equipment, the term frit denotes a filter made by the sintering-together of glass particles to produce a piece of known porosity referred to as fritted glass.

Automotive windshields incorporate a dark band of ceramic dots around the edges called a frit.[63]

In 2008, the Spanish ceramic frit, glaze and colours industry included 27 companies employing nearly 4,000 people with a combined annual turnover of approximately €1 billion.[64] In 2022, the global market for ceramic frits was estimated to be worth a total of US$ 1.67 billion.[65]

See also
  • Egyptian blue – Pigment used in ancient Egypt
  • Egyptian faience – Type of Ancient Egyptian sintered-quartz ceramic
  • Islamic pottery – pottery of Islamic lands
  • Iznik pottery – Type of decorated ceramic
  • Contact fritting – Minimum electric current through a contact to break through the surface film resistance

References
  1. Dictionary of Ceramics (3rd Edition) Edited by Dodd, A. Murfin, D. Institute of Materials. 1994.
  2. T. Pradell et al. 2006, "Physical Processes Involved in Production of the Ancient Pigment, Egyptian Blue", Journal of the American Ceramic Society 89.4: 1431.
  3. L. Lee and S. Quirke 2000, "Painting Materials", In: P. T. Nicholson and I. Shaw (eds.), Ancient Egyptian Materials and Technology, Cambridge: Cambridge University Press, 109;
  4. Moorey, P. R. S., 1985, Materials and Manufacture in Ancient Mesopotamia, BAR International Series 237, Oxford: Bar Publications, 134–135;
  5. Tite, M. S., et al., 1998, "The Use of Copper and Cobalt Colorants in Vitreous Materials in Ancient Egypt", In: S. Colinart and M. Menu (eds.), La Couleur Dans La Peinture et L'Émaillage de L'Égypte Ancienne, Bari: Edipuglia, 112–113.
  6. G. D. Hatton, A. J. Shortland, and M. S. Tite 2008, "The Production Technology of Egyptian Blue and Green Frits from Second Millennium BC Egypt and Mesopotamia", Journal of Archaeological Science 35: 1591.
  7. Tite et al. 1998, 114.
  8. Tite et al. 1998, 112–113.
  9. Hatton, Shortland, and Tite 2008, 1591.
  10. Pradell et al. 2006, 1430–1431.
  11. Lee and Quirke 2000, 109.
  12. Hatton, Shortland, and Tite 2008, 1591; Lee and Quirke 2000, 110.
  13. Lee and Quirke 2000, 110.
  14. Pradell et al. 2006, 1431.
  15. Wood, Jonathan, R.; Hsu, Yi-Ting (2019). "An Archaeometallurgical Explanation for the Disappearance of Egyptian and Near Eastern Cobalt-Blue Glass at the end of the Late Bronze Age" (PDF). Internet Archaeology (52). doi:10.11141/ia.52.3.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  16. Hatton, Shortland, and Tite 2008, 1592.
  17. Hatton, Shortland, and Tite 2008, 1596.
  18. Hatton, Shortland, and Tite 2008, 1592; Lee and Quirke 2000, 109.
  19. D. A. Stocks 1997, "Derivation of Ancient Egyptian Faience Core and Glaze Materials", Antiquity 71: 181.
  20. Stocks 1997, 180–181.
  21. A. Lucas and J. R. Harris 1962, Ancient Egyptian Materials and Industries, 4th ed., London: Edward Arnold Publishers Ltd., 344–345.
  22. P. Bianchetti et al. 2000, "Production and Characterization of Egyptian Blue and Egyptian Green Frit", Journal of Cultural Heritage 1: 179; Hatton, Shortland, and Tite 2008, 1592.
  23. Hatton, Shortland, and Tite 2008, 1591; Lee and Quirke 2000, 112; Tite et al. 1998, 113.
  24. Lee and Quirke 2000, 112.
  25. Bianchetti et al. 2000, 181-183.
  26. A. L. Oppenheim et al. (eds.) 1970, Glass and Glassmaking in Ancient Mesopotamia, Corning: The Corning Museum of Glass, 22–23, 118.
  27. P. T. Nicholson and J. Henderson 2000, "Glass", In: P. T. Nicholson and I. Shaw (eds.), Ancient Egyptian Materials and Technology, Cambridge: Cambridge University Press, 199.
  28. A. L. Oppenheim 1970, "The Cuneiform Texts", In: A.L. Oppenheim et al. (eds.), Glass and Glassmaking in Ancient Mesopotamia, Corning: The Corning Museum of Glass, 35.
  29. R.H. Brill 1970, "The Chemical Interpretation of the Texts", In: A. L. Oppenheim et al. (eds.), Glass and Glassmaking in Ancient Mesopotamia, Corning: The Corning Museum of Glass, 113.
  30. Brill 1970, 112–113.
  31. Brill 1970, 118.
  32. Moorey 1985, 135.
  33. Nicholson and Henderson 2000, 199.
  34. Tite et al. 1998, 116.
  35. A. Kaczmarczyk and C. Lahanier 1985, "Ancient Egyptian Frits and Colored Faience Bodies: Problems of Classification", In: P. A. England and L. Van Zelst (eds.), Application of Science in Examination of Works of Art, Boston: Museum of Fine Arts, 97.
  36. Kaczmarczyk and Lahanier 1985, 97.
  37. P. B. Vandiver and W. D. Kingery 1992, "Manufacture of an Eighteenth Dynasty Egyptian Faience Chalice", In: M. Bimson and I.C. Freestone (eds.), British Museum Occasional Paper 56: Early Vitreous Materials, London: British Museum, 81.
  38. Tite et al. 1998, 116, 118.
  39. P. T. Nicholson and E. Peltenburg 2000, "Egyptian Faience", In: P. T. Nicholson and I. Shaw (eds.), Ancient Egyptian Materials and Technology, Cambridge: Cambridge University Press, 178.
  40. Nicholson and Peltenburg 2000, 178.
  41. A. Kaczmarczyk and R. E. M. Hedges 1983, Ancient Egyptian Faience, Warminster: Aris and Phillips Ltd., 217.
  42. Kaczmarczyk and Lahanier 1985, 98.
  43. Tite et al. 1998, 118.
  44. A. K. Bernsted 2003, Early Islamic Pottery: Materials and Techniques, London: Archetype Publications Ltd., 25; R. B. Mason and M.S. Tite 1994, "The Beginnings of Islamic Stonepaste Technology," Archaeometry 36.1: 77
  45. Mason and Tite 1994, 77.
  46. Mason and Tite 1994, 79–80.
  47. Mason and Tite 1994, 80.
  48. Mason and Tite 1994, 87.
  49. M. S. Tite 1989, "Iznik Pottery: An Investigation of the Methods of Production", Archaeometry 31.2: 115.
  50. Tite 1989, 120.
  51. Tite 1989, 129.
  52. Tite 1989, 120, 123.
  53. Tite 1989, 121.
  54. Potter and Ceramics. Rosethal E. Pelican Books. 1949
  55. "Colour me bright & blue". 20 February 2016.
  56. 'Managing Dwindling Glaze Of Jaipur Blue Pottery: A Case Of Rajasthan, India' Mathur A.K, Shukla D. International Journal of Advanced Research in Management and Social Sciences. Vol. 3, No. 12, December 2014
  57. 'Tryst with Tradition - Exploring Rajasthan Through the Alankar Museum' Jawahar Kala Kendra. Alankar Museum. 2011. Pg. 6
  58. Ceramics Glaze Technology. Taylor J. R. & Bull A. C. Pergamon Press. 1986.
  59. Moorey 1985, 134–135.
  60. O.R. Lazutkina et al. 2006, "Glass Enamel for Steel Based on Diatomite Material", Glass and Ceramics 63.5–6: 170.
  61. C. Vitale-Brovarone, et al., 2008, "Biocompatible Glass-Ceramic Materials for Bone Substitution", Journal of Materials Science 19: 472.
  62. J. Liang and W. Lu (in press) 2009, "Microwave Dielectric Properties of Li2TiO3 Ceramics Doped with ZnO-B2O3 Frit", Journal of the American Ceramic Society, 1.
  63. Zbinden, Lyn (2014). "Chapter 7 – Ceramic Frit and Shadeband". Glass Engineering: Design Solutions for Automotive Applications. doi:10.4271/R-433. ISBN 978-0-7680-8129-9. Retrieved 9 June 2020. {{cite book}}: |website= ignored (help)
  64. ’Competitiveness and Profitability - New Challenges in the Ceramic Frit’ Tortajada-Esparza, I. Lucio, Ignacio, D. Gabaldón-Estevan. Glaze and Colour Industry - Part 2, Interceram 58. 2008
  65. ’Global Ceramic Frit Market Research Report.’ Absolute Reports 2002

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.