EMD GP8

The EMD GP8 is a model of four-axle diesel locomotive rebuilt by Illinois Central's Paducah shops using a General Motors Electro-Motive Division (EMD) GP7, GMD GP7 or GP9 as a start. It is similar to the GP10 and GP11.

EMD/Illinois Central GP8
A Ripley and New Albany Railroad GP8 in 2012.
Type and origin Power type Diesel-electric Builder General Motors Electro-Motive Division (EMD) Rebuilder Illinois Central Railroad’s Paducah, Kentucky shops Number rebuilt 111
Specifications Configuration: ​  • AAR B-B Gauge 4 ft 8+1⁄2 in (1,435 mm) Length 56 ft 2 in (17.12 m) Fuel capacity 1,600 US gal (6,100 L; 1,300 imp gal) Lubricant cap. 200 US gal (760 L; 170 imp gal) Coolant cap. 230 US gal (870 L; 190 imp gal) Sandbox cap. 18 cu ft (510 dm3) Prime mover EMD567BC Loco brake Independent air Train brakes Air, schedule 26-L
Performance figures Maximum speed 65 mph (105 km/h) Power output 1,500 or 1,600 hp (1.12 or 1.19 MW)

A total of 111 units were rebuilt to "GP8" for the Illinois Central and Illinois Central Gulf. Core units used in the construction of these units were Illinois Central GP7, GP9, a GP8, C&O GP9, D&RGW GP9, DT&I GP7, N&W GP7, P&LE GP7, QNS&L GP7, RDG GP7, St.J&LC GP9, SLSF GP7, and SP GP9.

The Paducah Shops also rebuilt 16 Conrail GP7s to GP8s. Nine were rebuilt in 1976 and another seven in 1978. Rock Island's Silvis Shops rebuilt 20 Conrail GP7s into GP8s in 1978. Morrison-Knudsen's Boise Shops rebuilt 13 Conrail GP7s into GP8s in 1978. The 1976 Conrail units rebuilt at Paducah were the equivalent of the Illinois Central rebuilds. The 1978 rebuilds were engine and electrical gear only rebuilds with no carbody modifications.[1]