Gibson ES-135

The Gibson ES-135 is a semi-hollow body electric guitar made by the Gibson Guitar Corporation. Originally introduced in 1956, it was discontinued in 1958.[1] Some guitars were stamped with and marketed as an ES-130.[1] The original run amounted to 556 instruments produced.[2] The model, with some modifications, was reintroduced in 1991 and remained in production until 2004.

Gibson ES-135 with Roland JC-120

The Gibson ES-135 has a Florentine cutaway, a trapeze tailpiece, two P-100 pickups (stacked humbuckers with P-90 covers) with two tone and volume controls and a three-way switch. It had looks and tone reminiscent of the old ES-125 TDC, but was not a fully hollow thinline guitar, having a feedback-suppressing sustain block running under the pickups and bridge from the neck/body joint to the base of the body like the ES-335. Unlike the ES-335, the sustain block in the ES-135 was made of balsa wood rather than maple. The body itself and neck were again of similar construction to the ES-335, being built from laminated maple but with an unbound rosewood fingerboard with dot-style fret position markers. The metal fittings were chrome-plated, and the P-100s had black plastic "soapbar" style covers. The guitar, when launched, was the most basic and lowest-priced in the Gibson ES range, but had the same fittings, wiring and construction quality as more expensive models. At launch, Gibson claimed it was the first semi-solid electric guitar with a Florentine-style single cutaway in the world.

The ES-135 went through several changes during its production life. The P-100 pickups, intended to have the tone and output of the P-90 but without the single-coil P-90's tendency to hum, did not meet with universal approval, having a slightly less biting tone and at times an equal tendency to squeal at high volumes. The use of P-100s was therefore discontinued and conventional Gibson covered humbuckers substituted. The original trapeze tailpiece gave the guitar a distinctive tone and an aggressive "bark" when played with vigor, but again was not entirely popular. The trapeze makes re-stringing a slow operation and the very long string length needed to reach from the tailpiece to the tuners meant some brands of strings did not fit.

The ES-135 Studio featured no f-holes, a stop tailpiece and Tune-O-Matic bridge, and humbuckers.

The 1991 reissue was similarly constructed with a balsa block, Tune-O-Matic, and P-100's.[3]

The Gibson Guitar Corporation released a similar model with more up-market appointments (neck binding and inlays) and two classic humbucking pickups, the Gibson ES-137, in 2002.

See also

References
  1. Gruhn, George; Carter, Walter (2010). Electric Guitars and Basses. Backbeat Books. p. 70. ISBN 9780879309749.
  2. Duchossoir, A.R. (1998). Gibson Electrics - The Classic Years. Hal Leonard. ISBN 9781476851266.
  3. Bacon, Tony (2012). The Ultimate Guitar Sourcebook. Race Point Publishing. p. 195. ISBN 9781610588423.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.