Great Northern P-2

Built as passenger locomotives in 1923, they were used to haul passenger trains throughout the Great Northern. They were built to speed up passenger trains on the mainline and have replaced the earlier P-1 Class of "Mountains" of 1914, as they were deemed too slow for passenger service. While most Great Northern steam locomotives had a Belpaire firebox, the P-2s had a radial stay firebox. The first 18 were delivered as oil burners and the last 10 were delivered as coal burners.[1] In service, they were limited to 50 mph, but managed up to 4,800 miles a month and were rated at 10-12 heavyweight passenger cars up the 1.8% Walton Hill at 18 mph. Helper service is provided up the 1.65% grade outside of the St. Paul Union Depot if trains consisted of 10 or more cars.[2] Later in their service life, their boiler pressure was increased from 200 psi to 210 psi, increasing their tractive effort from 54,838 to 57,580 lbs. About half of the class received roller bearings. The P-2s were deemed as excellent passenger locomotives.[3]

The locomotives pulled passenger trains such as the Empire Builder and Oriental Limited and was the first to pull the former. While their performance in passenger service was excellent, they were replaced by the S-2 Class of Northerns in Empire Builder service, regulating them to other passenger trains and freight trains. As the Great Northern dieselized, retirement of the P-2s began in April 1955 and by April 1958, all have been retired.[3][4]

• No. 2507, while pulling train #27, the Fast Mail, hit a landslide near Picnic Point, south of Mukilteo, Washington in the pre-dawn hours of February 18, 1948. The engineer and fireman survived, but were both injured when the slide rolled the engine, tender and a baggage car off the track and went over the rock sea wall into Puget Sound.[5] The locomotive was eventually repaired and returned to service.