Pentagonal icositetrahedron

The pentagonal icositetrahedron can be constructed from a snub cube without taking the dual. Square pyramids are added to the six square faces of the snub cube, and triangular pyramids are added to the eight triangular faces that do not share an edge with a square. The pyramid heights are adjusted to make them coplanar with the other 24 triangular faces of the snub cube. The result is the pentagonal icositetrahedron.

Denote the tribonacci constant by ${\displaystyle t\approx 1.839\,286\,755\,21}$. (See snub cube for a geometric explanation of the tribonacci constant.) Then Cartesian coordinates for the 38 vertices of a pentagonal icositetrahedron centered at the origin, are as follows:

• the 12 even permutations of (±1, ±(2t+1), ±t²) with an even number of minus signs
• the 12 odd permutations of (±1, ±(2t+1), ±t²) with an odd number of minus signs
• the 6 points (±t³, 0, 0), (0, ±t³, 0) and (0, 0, ±t³)
• the 8 points (±t², ±t², ±t²)

The convex hulls for these vertices[4] scaled by ${\displaystyle t^{-3}}$ result in a unit circumradius octahedron centered at the origin, a unit cube centered at the origin scaled to ${\displaystyle R\approx 0.9416969935}$, and an irregular chiral snub cube scaled to ${\displaystyle R}$, as visualized in the figure below:

The pentagonal faces have four angles of ${\displaystyle \arccos((1-t)/2)\approx 114.812\,074\,477\,90^{\circ }}$ and one angle of ${\displaystyle \arccos(2-t)\approx 80.751\,702\,088\,39^{\circ }}$. The pentagon has three short edges of unit length each, and two long edges of length ${\displaystyle (t+1)/2\approx 1.419\,643\,377\,607\,08}$. The acute angle is between the two long edges. The dihedral angle equals ${\displaystyle \arccos(-1/(t^{2}-2))\approx 136.309\,232\,892\,32^{\circ }}$.

If its dual snub cube has unit edge length, its surface area and volume are:[5]

${\displaystyle {\begin{aligned}A&=3{\sqrt {\frac {22(5t-1)}{4t-3}}}&&\approx 19.299\,94\\V&={\sqrt {\frac {11(t-4)}{2(20t-37)}}}&&\approx 7.4474\end{aligned}}}$

The pentagonal icositetrahedron has three symmetry positions, two centered on vertices, and one on midedge.

Orthogonal projections

Projective symmetry	[3]	[4]+	[2]
Image
Dual image

Variations

Isohedral variations with the same chiral octahedral symmetry can be constructed with pentagonal faces having 3 edge lengths.

This variation shown can be constructed by adding pyramids to 6 square faces and 8 triangular faces of a snub cube such that the new triangular faces with 3 coplanar triangles merged into identical pentagon faces.

Snub cube with augmented pyramids and merged faces

Pentagonal icositetrahedron

Net

Spherical pentagonal icositetrahedron

This polyhedron is topologically related as a part of sequence of polyhedra and tilings of pentagons with face configurations (V3.3.3.3.n). (The sequence progresses into tilings the hyperbolic plane to any n.) These face-transitive figures have (n32) rotational symmetry.

n32 symmetry mutations of snub tilings: 3.3.3.3.n
Symmetry n32	Spherical				Euclidean	Compact hyperbolic		Paracomp.
	232	332	432	532	632	732	832	∞32
Snub figures
Config.	3.3.3.3.2	3.3.3.3.3	3.3.3.3.4	3.3.3.3.5	3.3.3.3.6	3.3.3.3.7	3.3.3.3.8	3.3.3.3.∞
Gyro figures
Config.	V3.3.3.3.2	V3.3.3.3.3	V3.3.3.3.4	V3.3.3.3.5	V3.3.3.3.6	V3.3.3.3.7	V3.3.3.3.8	V3.3.3.3.∞

The pentagonal icositetrahedron is second in a series of dual snub polyhedra and tilings with face configuration V3.3.4.3.n.

4n2 symmetry mutations of snub tilings: 3.3.4.3.n
Symmetry 4n2	Spherical		Euclidean	Compact hyperbolic				Paracomp.
	242	342	442	542	642	742	842	∞42
Snub figures
Config.	3.3.4.3.2	3.3.4.3.3	3.3.4.3.4	3.3.4.3.5	3.3.4.3.6	3.3.4.3.7	3.3.4.3.8	3.3.4.3.∞
Gyro figures
Config.	V3.3.4.3.2	V3.3.4.3.3	V3.3.4.3.4	V3.3.4.3.5	V3.3.4.3.6	V3.3.4.3.7	V3.3.4.3.8	V3.3.4.3.∞

The pentagonal icositetrahedron is one of a family of duals to the uniform polyhedra related to the cube and regular octahedron.

Uniform octahedral polyhedra
Symmetry: [4,3], (*432)							[4,3]+ (432)	[1+,4,3] = [3,3] (*332)		[3+,4] (3*2)
{4,3}	t{4,3}	r{4,3} r{31,1}	t{3,4} t{31,1}	{3,4} {31,1}	rr{4,3} s2{3,4}	tr{4,3}	sr{4,3}	h{4,3} {3,3}	h2{4,3} t{3,3}	s{3,4} s{31,1}
		=	=	=				= or	= or	=
Duals to uniform polyhedra
V43	V3.82	V(3.4)2	V4.62	V34	V3.43	V4.6.8	V34.4	V33	V3.62	V35

• Williams, Robert (1979). The Geometrical Foundation of Natural Structure: A Source Book of Design. Dover Publications, Inc. ISBN 0-486-23729-X. (Section 3-9)
• Wenninger, Magnus (1983), Dual Models, Cambridge University Press, doi:10.1017/CBO9780511569371, ISBN 978-0-521-54325-5, MR 0730208 (The thirteen semiregular convex polyhedra and their duals, Page 28, Pentagonal icositetrahedron)
• The Symmetries of Things 2008, John H. Conway, Heidi Burgiel, Chaim Goodman-Strauss, ISBN 978-1-56881-220-5 (Chapter 21, Naming the Archimedean and Catalan polyhedra and tilings, page 287, pentagonal icosikaitetrahedron)

• Pentagonal Icositetrahedron – Interactive Polyhedron Model