Regular dodecahedron

If the edge length of a regular dodecahedron is ${\displaystyle a}$, the radius of a circumscribed sphere (one that touches the regular dodecahedron at all vertices) is

${\displaystyle r_{u}=a{\frac {\sqrt {3}}{4}}\left(1+{\sqrt {5}}\right)\approx 1.401\,258\,538\cdot a}$

(sequence A179296 in the OEIS)

and the radius of an inscribed sphere (tangent to each of the regular dodecahedron's faces) is

${\displaystyle r_{i}=a{\frac {1}{2}}{\sqrt {{\frac {5}{2}}+{\frac {11}{10}}{\sqrt {5}}}}\approx 1.113\,516\,364\cdot a}$

while the midradius, which touches the middle of each edge, is

${\displaystyle r_{m}=a{\frac {1}{4}}\left(3+{\sqrt {5}}\right)\approx 1.309\,016\,994\cdot a}$

These quantities may also be expressed as

${\displaystyle r_{u}=a\,{\frac {\sqrt {3}}{2}}\phi }$

${\displaystyle r_{i}=a\,{\frac {\phi ^{2}}{2{\sqrt {3-\phi }}}}}$

${\displaystyle r_{m}=a\,{\frac {\phi ^{2}}{2}}}$

where ϕ is the golden ratio.

Note that, given a regular dodecahedron of edge length one, r_u is the radius of a circumscribing sphere about a cube of edge length ϕ, and r_i is the apothem of a regular pentagon of edge length ϕ.

The surface area A and the volume V of a regular dodecahedron of edge length a are:

${\displaystyle {\displaystyle A=3{\sqrt {25+10{\sqrt {5}}}}a^{2}\approx 20.645\,728\,807a^{2}}}$

${\displaystyle V={\frac {1}{4}}(15+7{\sqrt {5}})a^{3}\approx 7.663\,118\,9606a^{3}}$

Additionally, the surface area and volume of a regular dodecahedron are related to the golden ratio. A dodecahedron with an edge length of one unit has the properties:[3]

${\displaystyle {\displaystyle A={\frac {15\phi }{\sqrt {3-\phi }}}}}$

${\displaystyle {\displaystyle V={\frac {5\phi ^{3}}{6-2\phi }}}}$

The regular dodecahedron has two high orthogonal projections, centered, on vertices and pentagonal faces, correspond to the A₂ and H₂ Coxeter planes. The edge-center projection has two orthogonal lines of reflection.

Orthogonal projections

Centered by	Vertex	Face	Edge
Image
Projective symmetry	[[3]] = [6]	[[5]] = [10]	[2]

In perspective projection, viewed on top of a pentagonal face, the regular dodecahedron can be seen as a linear-edged Schlegel diagram, or stereographic projection as a spherical polyhedron. These projections are also used in showing the four-dimensional 120-cell, a regular 4-dimensional polytope, constructed from 120 dodecahedra, projecting it down to 3-dimensions.

Projection	Orthogonal projection	Perspective projection
		Schlegel diagram	Stereographic projection
Regular dodecahedron
Dodecaplex (120-cell)

The regular dodecahedron can also be represented as a spherical tiling.

Orthographic projection	Stereographic projection

Vertex coordinates:
	The orange vertices lie at (±1, ±1, ±1) and form a cube (dotted lines).
	The green vertices lie at (0, ±ϕ, ±1/ϕ) and form a rectangle on the yz-plane.
	The blue vertices lie at (±1/ϕ, 0, ±ϕ) and form a rectangle on the xz-plane.
	The pink vertices lie at (±ϕ, ±1/ϕ, 0) and form a rectangle on the xy-plane.
The distance between adjacent vertices is 2/ϕ, and the distance from the origin to any vertex is √3. ϕ = 1 + √5/2 is the golden ratio.

The following Cartesian coordinates define the 20 vertices of a regular dodecahedron centered at the origin and suitably scaled and oriented:[4]

(±1, ±1, ±1)

(0, ±ϕ, ±1/ϕ)

(±1/ϕ, 0, ±ϕ)

(±ϕ, ±1/ϕ, 0)

where ϕ = 1 + √5/2 ≈ 1.618 is the golden ratio. The edge length is 2/ϕ = √5 − 1. The circumradius is √3.

• The dihedral angle of a regular dodecahedron is 2 arctan(ϕ) or approximately 116.565° (where again ϕ = 1 + √5/2, the golden ratio). OEIS: A137218 Note that the tangent of the dihedral angle is exactly −2.
• If the original regular dodecahedron has edge length 1, its dual icosahedron has edge length ϕ.
• If the five Platonic solids are built with same volume, the regular dodecahedron has the shortest edges.
• It has 43,380 nets.
• The map-coloring number of a regular dodecahedron's faces is 4.
• The distance between the vertices on the same face not connected by an edge is ϕ times the edge length.
• If two edges share a common vertex, then the midpoints of those edges form a 36-72-72 golden triangle with the body center.

As a configuration

This configuration matrix represents the dodecahedron. The rows and columns correspond to vertices, edges, and faces. The diagonal numbers say how many of each element occur in the whole dodecahedron. The nondiagonal numbers say how many of the column's element occur in or at the row's element.[5][6]

${\displaystyle {\begin{bmatrix}{\begin{matrix}20&3&3\\2&30&2\\5&5&12\end{matrix}}\end{bmatrix}}}$

Here is the configuration expanded with k-face elements and k-figures. The diagonal element counts are the ratio of the full Coxeter group H₃, order 120, divided by the order of the subgroup with mirror removal.

H3		k-face	fk	f0	f1	f2	k-fig	Notes
A2		( )	f0	20	3	3	{3}	H3/A2 = 120/6 = 20
A1A1		{ }	f1	2	30	2	{ }	H3/A1A1 = 120/4 = 30
H2		{5}	f2	5	5	12	( )	H3/H2 = 120/10 = 12

The regular dodecahedron is the third in an infinite set of truncated trapezohedra which can be constructed by truncating the two axial vertices of a pentagonal trapezohedron.

The stellations of the regular dodecahedron make up three of the four Kepler–Poinsot polyhedra.

A rectified regular dodecahedron forms an icosidodecahedron.

The regular dodecahedron has icosahedral symmetry I_h, Coxeter group [5,3], order 120, with an abstract group structure of A₅ × Z₂.

Relation to the regular tetrahedron

Five tetrahedra inscribed in a dodecahedron. Five opposing tetrahedra (not shown) can also be inscribed.

As two opposing tetrahedra can be inscribed in a cube, and five cubes can be inscribed in a dodecahedron, ten tetrahedra in five cubes can be inscribed in a dodecahedron: two opposing sets of five, with each set covering all 20 vertices and each vertex in two tetrahedra (one from each set, but not the opposing pair).

Just as a tetrahedron can be inscribed in a cube, so a cube can be inscribed in a dodecahedron. By reciprocation, this leads to an octahedron circumscribed about an icosahedron. In fact, each of the twelve vertices of the icosahedron divides an edge of the octahedron according to the "golden section". Given the icosahedron, the circumscribed octahedron can be chosen in five ways, giving a compound of five octahedra, which comes under our definition of stellated icosahedron. (The reciprocal compound, of five cubes whose vertices belong to a dodecahedron, is a stellated triacontahedron.) Another stellated icosahedron can at once be deduced, by stellating each octahedron into a stella octangula, thus forming a compound of ten tetrahedra. Further, we can choose one tetrahedron from each stella octangula, so as to derive a compound of five tetrahedra, which still has all the rotation symmetry of the icosahedron (i.e. the icosahedral group), although it has lost the reflections. By reflecting this figure in any plane of symmetry of the icosahedron, we obtain the complementary set of five tetrahedra. These two sets of five tetrahedra are enantiomorphous, i.e. not directly congruent, but related like a pair of shoes. [Such] a figure which possesses no plane of symmetry (so that it is enantiomorphous to its mirror-image) is said to be chiral.[8]

Relation to the 6-cube and rhombic triacontahedron

Projection of 6-demicube into regular dodecahedral envelope

It can be projected to 3D from the 6-dimensional 6-demicube using the same basis vectors that form the hull of the rhombic triacontahedron from the 6-cube. Shown here including the inner 12 vertices, which are not connected by the outer hull edges of 6D norm length √2, form a regular icosahedron.

The 3D projection basis vectors [u,v,w] used are:

u = (1, ϕ, 0, −1, ϕ, 0)

v = (ϕ, 0, 1, ϕ, 0, −1)

w = (0, 1, ϕ, 0, −1, ϕ)

Roman dodecahedron

Omnidirectional sound source

Regular dodecahedral objects have found some practical applications, and have also played a role in the visual arts and in philosophy.

Iamblichus states that Hippasus, a Pythagorean, perished in the sea, because he boasted that he first divulged "the sphere with the twelve pentagons".[11] In Theaetetus, a dialogue of Plato, Plato hypothesized that the classical elements were made of the five uniform regular solids; these later became known as the platonic solids. Of the fifth Platonic solid, the dodecahedron, Plato obscurely remarked, "...the god used [it] for arranging the constellations on the whole heaven". Timaeus (c. 360 BC), as a personage of Plato's dialogue, associates the other four platonic solids with the four classical elements, adding that there is a fifth solid pattern which, though commonly associated with the regular dodecahedron, is never directly mentioned as such; "this God used in the delineation of the universe."[12] Aristotle also postulated that the heavens were made of a fifth element, which he called aithêr (aether in Latin, ether in American English).

Theaetetus gave a mathematical description of all five and may have been responsible for the first known proof that no other convex regular polyhedra exist. Euclid completely mathematically described the Platonic solids in the Elements, the last book (Book XIII) of which is devoted to their properties. Propositions 13–17 in Book XIII describe the construction of the tetrahedron, octahedron, cube, icosahedron, and dodecahedron in that order. For each solid Euclid finds the ratio of the diameter of the circumscribed sphere to the edge length. In Proposition 18 he argues that there are no further convex regular polyhedra.

Regular dodecahedra have been used as dice and probably also as divinatory devices. During the Hellenistic era, small, hollow bronze Roman dodecahedra were made and have been found in various Roman ruins in Europe. Their purpose is not certain.

In 20th-century art, dodecahedra appear in the work of M. C. Escher, such as his lithographs Reptiles (1943) and Gravitation (1952). In Salvador Dalí's painting The Sacrament of the Last Supper (1955), the room is a hollow regular dodecahedron. Gerard Caris based his entire artistic oeuvre on the regular dodecahedron and the pentagon, which is presented as a new art movement coined as Pentagonism.

A climbing wall consisting of three dodecahedral pieces

In modern role-playing games, the regular dodecahedron is often used as a twelve-sided die, one of the more common polyhedral dice.

Immersive Media Company, a former Canadian digital imaging company, made the Dodeca 2360 camera, the world's first 360° full-motion camera which captures high-resolution video from every direction simultaneously at more than 100 million pixels per second or 30 frames per second. It is based on regular dodecahedron.

The Megaminx twisty puzzle, alongside its larger and smaller order analogues, is in the shape of a regular dodecahedron.

In the children's novel The Phantom Tollbooth, the regular dodecahedron appears as a character in the land of Mathematics. Each of his faces wears a different expression – e.g. happy, angry, sad – which he swivels to the front as required to match his mood.

In nature and supramolecules

The fossil record of the coccolithophore Braarudosphaera bigelowii goes back 100 million years

The faces of a Holmium–magnesium–zinc (Ho-Mg-Zn) quasicrystal are true regular pentagons

The fossil coccolithophore Braarudosphaera bigelowii (see figure), a unicellular coastal phytoplanktonic alga, has a calcium carbonate shell with a regular dodecahedral structure about 10 micrometers across.[13]

Some quasicrystals and cages have dodecahedral shape (see figure). Some regular crystals such as garnet and diamond are also said to exhibit "dodecahedral" habit, but this statement actually refers to the rhombic dodecahedron shape.[14] [1]

Regular dodecahedra fill space with cubes and bilunabirotundas (Johnson solid 91), in the ratio of 1 to 1 to 3.[18][19] The dodecahedra alone make a lattice of edge-to-edge pyritohedra. The bilunabirotundas fill the rhombic gaps. Each cube meets six bilunabirotundas in three orientations.

Block model

Lattice of dodecahedra

6 bilunabirotundas around a cube

The regular dodecahedron is topologically related to a series of tilings by vertex figure n³.

*n32 symmetry mutation of regular tilings: {n,3}
Spherical				Euclidean	Compact hyperb.		Paraco.	Noncompact hyperbolic
{2,3}	{3,3}	{4,3}	{5,3}	{6,3}	{7,3}	{8,3}	{∞,3}	{12i,3}	{9i,3}	{6i,3}	{3i,3}

The regular dodecahedron can be transformed by a truncation sequence into its dual, the icosahedron:

Family of uniform icosahedral polyhedra
Symmetry: [5,3], (*532)							[5,3]+, (532)
{5,3}	t{5,3}	r{5,3}	t{3,5}	{3,5}	rr{5,3}	tr{5,3}	sr{5,3}
Duals to uniform polyhedra
V5.5.5	V3.10.10	V3.5.3.5	V5.6.6	V3.3.3.3.3	V3.4.5.4	V4.6.10	V3.3.3.3.5

Uniform octahedral polyhedra
Symmetry: [4,3], (*432)							[4,3]+ (432)	[1+,4,3] = [3,3] (*332)		[3+,4] (3*2)
{4,3}	t{4,3}	r{4,3} r{31,1}	t{3,4} t{31,1}	{3,4} {31,1}	rr{4,3} s2{3,4}	tr{4,3}	sr{4,3}	h{4,3} {3,3}	h2{4,3} t{3,3}	s{3,4} s{31,1}
		=	=	=				= or	= or	=
Duals to uniform polyhedra
V43	V3.82	V(3.4)2	V4.62	V34	V3.43	V4.6.8	V34.4	V33	V3.62	V35

The regular dodecahedron is a member of a sequence of otherwise non-uniform polyhedra and tilings, composed of pentagons with face configurations (V3.3.3.3.n). (For n > 6, the sequence consists of tilings of the hyperbolic plane.) These face-transitive figures have (n32) rotational symmetry.

n32 symmetry mutations of snub tilings: 3.3.3.3.n
Symmetry n32	Spherical				Euclidean	Compact hyperbolic		Paracomp.
	232	332	432	532	632	732	832	∞32
Snub figures
Config.	3.3.3.3.2	3.3.3.3.3	3.3.3.3.4	3.3.3.3.5	3.3.3.3.6	3.3.3.3.7	3.3.3.3.8	3.3.3.3.∞
Gyro figures
Config.	V3.3.3.3.2	V3.3.3.3.3	V3.3.3.3.4	V3.3.3.3.5	V3.3.3.3.6	V3.3.3.3.7	V3.3.3.3.8	V3.3.3.3.∞

The regular dodecahedron shares its vertex arrangement with four nonconvex uniform polyhedra and three uniform polyhedron compounds.

Five cubes fit within, with their edges as diagonals of the regular dodecahedron's faces, and together these make up the regular polyhedral compound of five cubes. Since two tetrahedra can fit on alternate cube vertices, five and ten tetrahedra can also fit in a regular dodecahedron.

Great stellated dodecahedron	Small ditrigonal icosidodecahedron	Ditrigonal dodecadodecahedron	Great ditrigonal icosidodecahedron
Compound of five cubes	Compound of five tetrahedra	Compound of ten tetrahedra

The 3 stellations of the regular dodecahedron are all regular (nonconvex) polyhedra: (Kepler–Poinsot polyhedra)

	0	1	2	3
Stellation	Regular dodecahedron	Small stellated dodecahedron	Great dodecahedron	Great stellated dodecahedron
Facet diagram

Regular dodecahedron graph
A Hamiltonian cycle in a dodecahedron.
Vertices	20
Edges	30
Radius	5
Diameter	5
Girth	5
Automorphisms	120 (A5 × Z2)[20]
Chromatic number	3
Properties	Hamiltonian, regular, symmetric, distance-regular, distance-transitive, 3-vertex-connected, planar graph
Table of graphs and parameters

The skeleton of the dodecahedron (the vertices and edges) form a graph. It is one of 5 Platonic graphs, each a skeleton of its Platonic solid.

This graph can also be constructed as the generalized Petersen graph G(10,2) where the vertices of a decagon are connected to those of two pentagons, one pentagon connected to odd vertices of the decagon and the other pentagon connected to the even vertices. Geometrically, this can be visualized as the 10-vertex equatorial belt of the dodecahedron connected to the two 5-vertex polar regions, one on each side.

The high degree of symmetry of the polygon is replicated in the properties of this graph, which is distance-transitive, distance-regular, and symmetric. The automorphism group has order 120. The vertices can be colored with 3 colors, as can the edges, and the diameter is 5.[21]

The dodecahedral graph is Hamiltonian – there is a cycle containing all the vertices. Indeed, this name derives from a mathematical game invented in 1857 by William Rowan Hamilton, the icosian game. The game's object was to find a Hamiltonian cycle along the edges of a dodecahedron.

Orthogonal projection

• 120-cell, a regular polychoron (4D polytope whose surface consists of 120 dodecahedral cells)
• Braarudosphaera bigelowii − A dodecahedron shaped coccolithophore (a unicellular phytoplankton algae).
• Dodecahedrane (molecule)
• Pentakis dodecahedron
• Snub dodecahedron
• Truncated dodecahedron

Wikimedia Commons has media related to Dodecahedron.

• Weisstein, Eric W. "Regular Dodecahedron". MathWorld.
• Klitzing, Richard. "3D convex uniform polyhedra o3o5x – doe".
• Editable printable net of a dodecahedron with interactive 3D view
• The Uniform Polyhedra
• Origami Polyhedra – Models made with Modular Origami
• Dodecahedron – 3-d model that works in your browser
• Virtual Reality Polyhedra The Encyclopedia of Polyhedra
  • VRML#Regular dodecahedron
• K.J.M. MacLean, A Geometric Analysis of the Five Platonic Solids and Other Semi-Regular Polyhedra
• Dodecahedron 3D Visualization
• Stella: Polyhedron Navigator: Software used to create some of the images on this page.
• How to make a dodecahedron from a Styrofoam cube
• The Greek, Indian, and Chinese Elements – Seven Element Theory