Home network

One of the most common ways of creating a home network is by using wireless radio signal technology; the 802.11 network as certified by the IEEE. Most wireless-capable residential devices operate at a frequency of 2.4 GHz under 802.11b and 802.11g or 5 GHz under 802.11a. Some home networking devices operate in both radio-band signals and fall within the 802.11n or 802.11ac standards. Wi-Fi is a marketing and compliance certification for IEEE 802.11 technologies.[1] The Wi-Fi Alliance has tested compliant products, and certifies them for interoperability.

Low power, close range communication based on IEEE 802.15 standards has a strong presence in homes. Bluetooth continues to be the technology of choice for most wireless accessories such as keyboards, mice, headsets, and game controllers. These connections are often established in a transient, ad-hoc manner and are not thought of as permanent residents of a home network.

A "low-rate" version of the original WPAN protocol was used as the basis of Zigbee. Despite originally being conceived as a standard for low power machine-to-machine communication in industrial environments, the technology has been found to be well suited for integration into embedded "Smart Home" offerings that are expected to run on battery for extended periods of time. Zigbee utilizes mesh networking to overcome the distance limitations associated with traditional WPAN in order to establish a single network of addressable devices spread across the entire building. Z-Wave is an additional standard also built on 802.15.4, that was developed specifically with the needs of home automation device makers in mind.

Most wired network infrastructures found in homes utilize Category 5 or Category 6 twisted pair cabling with RJ45 compatible terminations. This medium provides physical connectivity between the Ethernet interfaces present on a large number of residential IP-aware devices. Depending on the grade of cable and quality of installation, speeds of up to 10 Mbit/s, 100 Mbit/s, 1 Gbit/s, or 10Gbit/s are supported.

Some neighborhoods support running fiber optic cables running directly into homes. This enables service providers to offer internet services with much higher bandwidth and/or lower latency characteristics associated with end-to-end optical signaling.

• VDSL and VDSL2
• HomePNA support up to 160 Mbit/s

The following standards allow devices to communicate over coaxial cables, which are frequently installed to support multiple television sets throughout homes.

• DOCSIS
• The Multimedia over Coax Alliance (MoCA) standard can achieve up to 270 Mbit/s
• CWave
• HomePNA support up to 320 Mbit/s

The ITU-T G.hn and IEEE Powerline standard, which provide high-speed (up to 1 Gbit/s) local area networking over existing home wiring, are examples of home networking technology designed specifically for IPTV delivery.[2] Recently, the IEEE passed proposal P1901 which grounded a standard within the Market for wireline products produced and sold by companies that are part of the HomePlug Alliance.[3] The IEEE is continuously working to push for P1901 to be completely recognized worldwide as the sole standard for all future products that are produced for Home Networking.

• HomePlug and HomePNA are associated standards
• Universal Powerline Association

• Personal computers such as desktops, laptops, netbooks, and tablets
• A network attached storage (NAS) device can be easily accessed via the CIFS or NFS protocols for general storage or for backup purposes.
• A print server can be used to share any directly connected printers with other computers on the network.
• IP phones or smartphones (when connected via Wi-Fi) utilizing VoIP technologies

• Smart speakers
• Television: Some new TVs and DVRs include integrated WiFi connectivity which allows the user to access services such as Netflix and YouTube.
• Home audio: Digital audio players, and stereo systems with network connectivity can allow a user to easily access their music library, often using Bonjour to discover and interface with an instance of iTunes running on a remote PC.
• Gaming: Video game consoles rely on connectivity to the home network to enable a significant portion of their overall features, such as the multiplayer in games, social network integration, ability to purchase or demo new games, and receive software updates. Recent consoles have begun more aggressively pursuing the role of the sole entertainment and media hub of the home.
• DLNA is a common protocol used for interoperability between networked media-centric devices in the home.

Some older entertainment devices may not feature the appropriate network interfaces required for home network connectivity. In some situations, USB dongles and PCI Network Interface Cards are available as accessories that enable this functionality.

• "Connected" light bulbs such as Lifx, Philips Hue, Samsung Smart Bulb, GE Link
• Zigbee Light Link is the open standards protocol used by current major "Connected" light bulb vendors

• Access control: Plume[4]
• Security alarms: iSmartAlarm
• Garage door and gate openers: Liftmaster MyQ, GoGogate

• HVAC: Nest Learning Thermostat
• Smoke/CO detectors: Nest Protect

The convenience, availability, and reliability of externally managed cloud computing resources continues to become an appealing choice for many home-dwellers without interest or experience in IT. For these individuals, the subscription fees and/or privacy risks associated with such services are often perceived as lower cost than having to configure and maintain similar facilities within a home network. In such situations, local services along with the devices maintaining them are replaced by those in an external data center and made accessible to the home-dweller's computing devices via a WAN connection.

DHCP is used to assign internal IP addresses to members of a home network. A DHCP server typically runs on the router[5] with end devices as its clients. The router itself is a client of the external DHCP servers owned by the internet service provider. All DHCP clients request configuration settings using the DHCP protocol in order to acquire their IP address, a default route and one or more DNS server addresses. Once the client implements these settings, it will be able to communicate on that internet.[6]

Small standalone embedded home network devices typically require remote configuration from a PC on the same network. For example, broadband modems are often configured through a web browser running on a PC in the same network. These devices usually use a minimal Linux distribution with a lightweight HTTP server running in the background to allow the user to conveniently modify system variables from a GUI rendered in their browser. These pages use HTML forms extensively and make attempts to offer styled, visually appealing views that are also descriptive and easy to use.

Apple devices aim to make networking as hidden and automatic as possible, utilizing a zero-configuration networking protocol called Bonjour embedded within their otherwise proprietary line of software and hardware products.

Microsoft offers simple access control features built into their Windows operating system. Homegroup is a feature that allows shared disk access, shared printer access and shared scanner access among all computers and users (typically family members) in a home, in a similar fashion as in a small office workgroup, e.g., by means of distributed peer-to-peer networking (without a central server). Additionally, a home server may be added for increased functionality. The Windows HomeGroup feature was introduced with Microsoft Windows 7 in order to simplify file sharing in residences. All users (typically all family members), except guest accounts, may access any shared library on any computer that is connected to the home group. Passwords are not required from the family members during logon. Instead, secure file sharing is possible by means of a temporary password that is used when adding a computer to the HomeGroup.[7]

The wireless signal strength of the standard residential wireless router may not be powerful enough to cover the entire house or may not be able to get through to all floors of multiple floor residences. In such situations, the installation of one or more wireless repeaters may be necessary.

Wi-Fi often extends beyond the boundaries of a home and can create coverage where it is least wanted, offering a channel through which non-residents could compromise a system and retrieve personal data. To prevent this it is usually sufficient to enforce the use of authentication, encryption, or VPN that requires a password for network connectivity.[8]

However new Wi-Fi standards working at 60 GHz, such as 802.11ad, enable confidence that the LAN will not trespass physical barriers, as at such frequencies a simple wall would attenuate the signal considerably.

For home networks relying on powerline communication technology, how to deal with electrical noise injected into the system from standard household appliances remains the largest challenge. Whenever any appliance is turned on or turned off it creates noise that could possibly disrupt data transfer through the wiring. IEEE products that are certified to be HomePlug 1.0 compliant have been engineered to no longer interfere with, or receive interference from other devices plugged into the same home's electrical grid.[9]

The administration of proliferating devices and software in home networks, and the growing amount of private data, is fast becoming an issue by itself. Keeping overview, applying without delay software updates and security patches, keeping juniors internet use within safe boundaries, structuring of storage and access levels for private files and other data, data backups, detection and cleaning of any infections, operating virtual private networks for easy access to resources in the home network when away, etc.. Such things are all issues that require attention and planned careful work in order to provide a secure, resilient, and stable home network easy to use for all members of the household and their guests.