List of IEC standards
This is an incomplete list of standards published by the International Electrotechnical Commission (IEC).
The numbers of older IEC standards were converted in 1997 by adding 60000; for example IEC 27 became IEC 60027. IEC standards often have multiple sub-part documents; only the main title for the standard is listed here.
- IEC 60027 Letter symbols to be used in electrical technology
- IEC 60028 International standard of resistance for copper
- IEC 60034 Rotating electrical machines
- IEC 60038 IEC Standard Voltages
- IEC 60041 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
- IEC 60044 Instrument transformers
- IEC 60045 Steam turbines
- IEC 60050 International Electrotechnical Vocabulary
- IEC 60051 Direct acting indicating analogue electrical measuring instruments and their accessories
- IEC 60052 Voltage measurement by means of standard air gaps
- IEC 60055 Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables)
- IEC 60059 IEC standard current ratings
- IEC 60060 High-voltage test techniques
- IEC 60061 Lamp caps and holders together with gauges for the control of interchangeability and safety
- IEC 60062 Marking codes for resistors and capacitors
- IEC 60063 Preferred number series for resistors and capacitors
- IEC 60064 Tungsten filament lamps for domestic and similar general lighting purposes – Performance requirements
- IEC 60065 Audio, video and similar electronic apparatus – Safety requirements
- IEC 60067 Dimensions of electronic tubes and valves
- IEC 60068 Environmental testing
- IEC 60071 Insulation co-ordination
- IEC 60072 Dimensions and output series for rotating electrical machines
- IEC 60073 Basic and safety principles for man-machine interface, marking and identification – Coding principles for indicators and actuators
- IEC 60076 Power transformers
- IEC 60077 Railway applications – Electric equipment for rolling stock
- IEC 60079 Explosive atmospheres
- IEC 60081 Double-capped fluorescent lamps – Performance specifications
- IEC 60083 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
- IEC 60085 Electrical insulation – Thermal evaluation and designation
- IEC 60086 Primary batteries;
- IEC 60092 Electrical installations in ships
- IEC 60094 Magnetic tape sound recording and reproducing systems
- IEC 60095 Lead-acid starter batteries
- IEC 60096 Radio frequency cables
- IEC 60098 Rumble measurement on Vinyl Disc Turntables
- IEC 60099 Surge arresters
- IEC 60100 Methods for the measurement of direct inter-electrode capacitance of electronic tubes and valves
- IEC 60104 Aluminium-magnesium-silicon alloy wire for overhead line conductors
- IEC 60105 Recommendation for commercial-purity aluminium busbar material
- IEC 60107 Methods of measurement on receivers for television broadcast transmissions
- IEC 60110 Power capacitors for induction heating installations
- IEC 60112 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
- IEC 60114 Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type
- IEC 60115 Fixed resistors for use in electronic equipment
- IEC 60118 Electroacoustics – Hearing aids
- IEC 60119 The Electrical Performance of Semiconductor Rectifiers (Metal Rectifiers) (Withdrawn)
- IEC 60120 Dimensions of ball and socket couplings of string insulator units
- IEC 60121 Recommendation for commercial annealed aluminium electrical conductor wire
- IEC 60122 Quartz crystal units of assessed quality
- IEC 60127 Miniature fuses
- IEC 60130 Connectors for frequencies below 3 MHz
- IEC 60134 Rating systems for electronic tubes and valves and analogous semiconductor devices
- IEC 60135 Numbering of electrodes and designation of units in electronic tubes and valves
- IEC 60136 Dimensions of brushes and brush-holders for electrical machinery
- IEC 60137 Insulated bushings for alternating voltages above 1000 V
- IEC 60139 Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges
- IEC 60141 Tests on oil-filled and gas-pressure cables and their accessories
- IEC 60143 Series capacitors for power systems
- IEC 60146 Semiconductor converters – General requirements and line commutated converters
- IEC 60151 Measurements of the electrical properties of electronic tubes and valves
- IEC 60152 Identification by hour numbers of the phase conductors of 3-phase electric systems
- IEC 60153 Hollow metallic waveguides
- IEC 60154 Flanges for waveguides
- IEC 60155 Glow-starters for fluorescent lamps
- IEC 60156 Insulating liquids – Determination of the breakdown voltage at power frequency
- IEC 60168 Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
- IEC 60169 Radio frequency connectors
- IEC 60172 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
- IEC 60183 Guidance for the selection of high-voltage A.C. cable systems
- IEC 60188 High-pressure mercury vapour lamps – Performance specifications
- IEC 60189 Low-frequency cables and wires with PVC insulation and PVC sheath
- IEC 60191 Mechanical standardization of semiconductor devices
- IEC 60192 Low-pressure sodium vapour lamps – Performance specifications
- IEC 60193 Hydraulic turbines, storage pumps and pump-turbines – Model acceptance tests
- IEC 60194 Printed board design, manufacture and assembly – Terms and definitions
- IEC 60195 Method of measurement of current noise generated in fixed resistors
- IEC 60196 IEC standard frequencies
- IEC 60197 High-voltage connecting wire with flame retarding insulation for use in television receivers
- IEC 60204 Safety of machinery – Electrical equipment of machines
- IEC 60205 Calculation of the effective parameters of magnetic piece parts
- IEC 60211 Maximum demand indicators, Class 1.0
- IEC 60212 Standard conditions for use prior to and during the testing of solid electrical insulating materials
- IEC 60214 Tap-changers
- IEC 60215 Safety requirements for radio transmitting equipment
- IEC 60216 Electrical insulating materials – Thermal endurance properties
- IEC 60227 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V
- IEC 60228 Conductors of insulated cables
- IEC 60229 Electric cables – Tests on extruded over-sheaths with a special protective function
- IEC 60230 Impulse tests on cables and their accessories
- IEC 60231 General principles of nuclear reactor instrumentation
- IEC 60233 Tests on Hollow Insulators for use in Electrical Equipment (Withdrawn)
- IEC 60235 Measurement of the electrical properties of microwave tubes
- IEC 60236 Methods for the designation of electrostatic deflecting electrodes of cathode-ray tubes
- IEC 60238 Edison screw lampholders
- IEC 60239 Graphite electrodes for electric arc furnaces – Dimensions and designation
- IEC 60240 Characteristics of electric infra-red emitters for industrial heating
- IEC 60243 Electric strength of insulating materials
- IEC 60244 Methods of measurement for radio transmitters
- IEC 60245 Rubber insulated cables – Rated voltages up to and including 450/750 V
- IEC 60246 Connecting wires having a rated voltage of 20 kV and 25 kV d.c. and a maximum working temperature of 105 °C for use in television receivers
- IEC 60247 Insulating liquids – Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
- IEC 60250 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
- IEC 60252 AC motor capacitors
- IEC 60254 Lead-acid traction batteries
- IEC 60255 Measuring relays and protection equipment
- IEC 60258 Direct acting recording electrical measuring instruments and their accessories
- IEC 60261 Sealing test for pressurized waveguide tubing and assemblies
- IEC 60263 Scales and sizes for plotting frequency characteristics and polar diagrams
- IEC 60264 Packaging of winding wires
- IEC 60268 Sound system equipment
- IEC 60269 Low-voltage fuses
- IEC 60270 High-voltage test techniques – Partial discharge measurements
- IEC 60273 Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
- IEC 60276 Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings
- IEC 60282 High-voltage fuses
- IEC 60286 Packaging of components for automatic handling
- IEC 60287 Electric cables – Calculation of the current rating
- IEC 60294 Measurement of the dimensions of a cylindrical component with axial terminations
- IEC 60296 Fluids for electrotechnical applications – Unused mineral insulating oils for transformers and switchgear
- IEC 60297 Mechanical structures for electronic equipment – Dimensions of mechanical structures of the 482,6 mm (19 in) series
- IEC 60298 high voltage switchgear in metallic enclosure (Withdrawn)
- IEC 60299 Household electric blankets – Methods for measuring performance
- IEC 60300 Dependability management
- IEC 60301 Preferred diameters of wire terminations of capacitors and resistors
- IEC 60304 Standard colours for insulation for low-frequency cables and wires
- IEC 60305 Insulators for overhead lines with a nominal voltage above 1000 V – Ceramic or glass insulator units for a.c. systems – Characteristics of insulator units of the cap and pin type
- IEC 60306 Measurement of photosensitive devices
- IEC 60308 Hydraulic turbines – Testing of control systems
- IEC 60309 Plugs, socket-outlets and couplers for industrial purposes
- IEC 60310 Railway applications – Traction transformers and inductors on board rolling stock
- IEC 60311 Electric irons for household or similar use – Methods for measuring performance
- IEC 60315 Methods of measurement on radio receivers for various classes of emission
- IEC 60317 Specifications for particular types of winding wires
- IEC 60318 Electroacoustics – Simulators of human head and ear
- IEC 60319 Presentation and specification of reliability data for electronic components
- IEC 60320 Appliance couplers for household and similar general purposes
- IEC 60322 Railway applications – Electric equipment for rolling stock – Rules for power resistors of open construction
- IEC 60325 Radiation protection instrumentation – Alpha, beta and alpha/beta (beta energy >60 keV) contamination meters and monitors
- IEC 60329 Strip-wound cut cores of grain oriented silicon-iron alloy, used for electronic and telecommunication equipment
- IEC 60331 Tests for electric cables under fire conditions – Circuit integrity
- IEC 60332 Tests on electric and optical fibre cables under fire conditions
- IEC 60335 Household and similar electrical appliances – Safety
- IEC 60336 Medical electrical equipment – X-ray tube assemblies for medical diagnosis – Characteristics of focal spots
- IEC 60338 Telemetering for consumption and demand
- IEC 60339 General purpose rigid coaxial transmission lines and their associated flange connectors
- IEC 60343 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
- IEC TR 60344 Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires – Application guide
- IEC 60345 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
- IEC 60347 Transverse track recorders
- IEC 60349 Electric traction – Rotating electrical machines for rail and road vehicles
- IEC 60350 Household electric cooking appliances
- IEC 60352 Solderless connections
- IEC 60353 Line traps for a.c. power systems
- IEC 60356 Dimensions for commutators and slip-rings
- IEC 60357 Tungsten halogen lamps (non vehicle) – Performance specifications
- IEC 60358 Coupling capacitors and capacitor dividers
- IEC 60360 Standard method of measurement of lamp cap temperature rise
- IEC 60364 Low-voltage electrical installations
- IEC 60368 Piezoelectric filters of assessed quality
- IEC 60370 Test procedure for thermal endurance of insulating varnishes – Electric strength method
- IEC 60371 Specification for insulating materials based on mica
- IEC 60372 Locking devices for ball and socket couplings of string insulator units – Dimensions and tests
- IEC 60374 Guide for choosing modular dimensions for waveguide components
- IEC 60375 Conventions concerning electric and magnetic circuits
- IEC 60376 Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment
- IEC 60377 Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz
- IEC 60379 Methods for measuring the performance of electric storage water-heaters for household purposes
- IEC 60381 Analogue signals for process control systems
- IEC 60382 Analogue pneumatic signal for process control systems
- IEC 60383 Insulators for overhead lines with a nominal voltage above 1000 V
- IEC 60384 Fixed capacitors for use in electronic equipment
- IEC 60386 Method of measurement of speed fluctuations in sound recording and reproducing equipment
- IEC 60392 Guide for the drafting of specifications for microwave ferrites
- IEC 60393 Potentiometers for use in electronic equipment
- IEC 60394 Varnished fabrics for electrical purposes
- IEC 60397 Test methods for batch furnaces with metallic heating resistors
- IEC 60398 Installations for electroheating and electromagnetic processing – General performance test methods
- IEC 60399 Barrel thread for lampholders with shade holder ring
- IEC 60400 Lampholders for tubular fluorescent lamps and starter holders
- IEC 60401 Terms and nomenclature for cores made of magnetically soft ferrites
- IEC 60404 Magnetic materials
- IEC 60412 Nuclear instrumentation – Nomenclature (identification) of scintillators and scintillation detectors and standard dimensions of scintillators
- IEC 60413 Test procedures for determining physical properties of brush materials for electrical machines
- IEC 60417 Graphical symbols for use on equipment
- IEC 60422 Mineral insulating oils in electrical equipment – Supervision and maintenance guidance
- IEC 60423 Conduit systems for cable management – Outside diameters of conduits for electrical installations and threads for conduits and fittings
- IEC 60424 Ferrite cores – Guidelines on the limits of surface irregularities
- IEC 60426 Electrical insulating materials – Determination of electrolytic corrosion caused by insulating materials – Test methods
- IEC 60428 Standard cells
- IEC 60432 Incandescent lamps – Safety specifications
- IEC 60433 Insulators for overhead lines with a nominal voltage above 1 000 V – Ceramic insulators for a.c. systems – Characteristics of insulator units of the long rod type
- IEC 60434 Aircraft electrical filament lamps
- IEC 60436 Electric dishwashers for household use – Methods for measuring the performance
- IEC 60437 Radio interference test on high-voltage insulators
- IEC 60439 Low voltage switchgear and control gear assemblies (Withdrawn)
- IEC 60440 Method of measurement of non-linearity in resistors
- IEC 60441 Photometric and colorimetric methods of measurement of the light emitted by a cathode-ray tube screen
- IEC 60442 Electric toasters for household and similar purposes – Methods for measuring the performance
- IEC 60444 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network
- IEC 60445 Basic and safety principles for man-machine interface, marking and identification – Identification of equipment terminals, conductor terminations and conductors
- IEC 60446 Wiring colours (Withdrawn, replaced by IEC 60445:2010)
- IEC 60447 Basic and safety principles for man-machine interface, marking and identification – Actuating principles
- IEC 60450 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
- IEC 60454 Specifications for pressure-sensitive adhesive tapes for electrical purposes
- IEC 60455 Resin based reactive compounds used for electrical insulation
- IEC 60456 Clothes washing machines for household use – Methods for measuring the performance
- IEC 60457 Rigid precision coaxial and their associated precision connectors
- IEC 60461 Time and control code
- IEC 60462 Nuclear instrumentation – Photomultiplier tubes for scintillation counting – Test procedures
- IEC 60464 Varnishes used for electrical insulation
- IEC 60465 Specification for unused insulating mineral oils for cables with oil ducts
- IEC 60468 Method of measurement of resistivity of metallic materials
- IEC 60469 Transitions, pulses and related waveforms – Terms, definitions and algorithms
- IEC 60471 Dimensions of clevis and tongue couplings of string insulator units
- IEC 60475 Method of sampling insulating liquids
- IEC 60477 Laboratory d.c. resistors
- IEC 60479 Effects of current on human beings and livestock
- IEC 60480 Guidelines for the checking and treatment of sulfur hexafluoride (SF6) taken from electrical equipment and specification for its re-use
- IEC 60481 Coupling devices for power line carrier systems
- IEC 60483 Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling
- IEC 60487 Methods of measurement for equipment used in terrestrial radio-relay systems
- IEC 60488 Higher performance protocol for the standard digital interface for programmable instrumentation
- IEC 60489 Methods of measurement for radio equipment used in the mobile services
- IEC 60493 Guide for the statistical analysis of ageing test data
- IEC 60494 Railway applications – Rolling stock – Pantographs – Characteristics and tests
- IEC 60495 Single sideband power-line carrier terminals
- IEC 60496 Methods for measuring the performance of electric warming plates for household and similar purposes
- IEC 60498 High-voltage coaxial connectors used in nuclear instrumentation
- IEC 60499 Voltage limits for electronics to be considered "consumer grade"
- IEC 60500 Underwater acoustics – Hydrophones – Properties of hydrophones in the frequency range 1 Hz to 500 kHz
- IEC 60502 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV)
- IEC 60503 Spools for broadcast videotape recorders (VTRS)
- IEC 60505 Evaluation and qualification of electrical insulation systems
- IEC 60507 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
- IEC 60510 Methods of measurement for radio equipment used in satellite earth stations
- IEC 60512 Connectors for electronic equipment – Tests and measurements
- IEC TR 60513 Fundamental aspects of safety standards for medical electrical equipment
- IEC 60515 Nuclear power plants – Instrumentation important to safety – Radiation detectors – Characteristics and test methods
- IEC 60519 Safety in installations for electroheating and electromagnetic processing
- IEC 60522 Determination of the permanent filtration of X-ray tube assemblies
- IEC 60523 Direct-current potentiometers
- IEC 60524 Direct-current resistive volt ratio boxes
- IEC 60526 High-voltage cable plug and socket connections for medical X-ray equipment
- IEC 60528 Expression of performance of air quality infra-red analyzers
- IEC 60529 Degrees of protection provided by enclosures (IP Code)
- IEC 60530 Methods for measuring the performance of electric kettles and jugs for household and similar use
- IEC 60531 Household electric thermal storage room heaters – Methods for measuring performance
- IEC 60532 Radiation protection instrumentation – Installed dose rate meters, warning assemblies and monitors – X and gamma radiation of energy between 50 keV and 7 MeV
- IEC 60533 Electrical and electronic installations in ships – Electromagnetic compatibility (EMC) – Ships with a metallic hull
- IEC 60534 Industrial-process control valves
- IEC 60539 Directly heated negative temperature coefficient thermistors
- IEC 60544 Electrical insulating materials – Determination of the effects of ionizing radiation
- IEC 60545 Guide for commissioning, operation and maintenance of hydraulic turbines
- IEC 60546 Controllers with analogue signals for use in industrial-process control systems
- IEC 60549 High-voltage fuses for the external protection of shunt capacitors
- IEC 60554 Specification for cellulosic papers for electrical purposes
- IEC 60556 Gyromagnetic materials intended for application at microwave frequencies – Measuring methods for properties
- IEC 60558 Type C helical video tape recorders
- IEC 60559 Binary floating-point arithmetic for microprocessor systems (Withdrawn)
- IEC 60560 Definitions and terminology of brush-holders for electrical machines
- IEC 60562 Measurements of incidental ionizing radiation from electronic tubes
- IEC 60564 D.C. bridges for measuring resistance
- IEC 60565 Underwater acoustics – Hydrophones – Calibration in the frequency range 0,01 Hz to 1 MHz
- IEC 60567 Oil-filled electrical equipment – Sampling of gases and analysis of free and dissolved gases – Guidance
- IEC 60568 Nuclear power plants – Instrumentation important to safety – In-core instrumentation for neutron fluence rate (flux) measurements in power reactors
- IEC 60570 Electrical supply track systems for luminaires
- IEC 60571 Railway applications – Electronic equipment used on rolling stock
- IEC 60574 Audio-visual, video and television equipment and systems (Withdrawn)
- IEC TR 60575 Thermal-mechanical performance test and mechanical performance test on string insulator units
- IEC 60580 Medical electrical equipment – Dose area product meters
- IEC 60581 High fidelity audio equipment and systems: Minimum performance requirements
- IEC 60584 Thermocouples
- IEC 60587 Electrical insulating materials used under severe ambient conditions – Test methods for evaluating resistance to tracking and erosion
- IEC 60588 Askarels for transformers and capacitors
- IEC 60589 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
- IEC 60590 Determination of the aromatic hydrocarbon content of new mineral insulating oils
- IEC 60598 Luminaires
- IEC 60599 Mineral oil-filled electrical equipment in service – Guidance on the interpretation of dissolved and free gases analysis
- IEC 60600 Equipment for minehead assay and sorting radioactive ores in containers
- IEC 60601 Medical electrical equipment
- IEC 60602 Type B helical video recorders
- IEC 60603 Connectors for frequencies below 3 MHz for use with printed boards
- IEC 60605 Equipment reliability testing
- IEC 60609 Hydraulic turbines, storage pumps and pump-turbines – Cavitation pitting evaluation
- IEC 60613 Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis
- IEC 60615 Terminology for microwave apparatus
- IEC TR 60616 Terminal and tapping markings for power transformers
- IEC 60617 Graphical symbols for diagrams
- IEC 60618 Inductive voltage dividers
- IEC 60619 Electrically operated food preparation appliances – Methods for measuring the performance
- IEC 60622 Secondary cells and batteries containing alkaline or other non-acid electrolytes – nickel-cadmium prismatic rechargeable single cells
- IEC 60623 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Vented nickel-cadmium prismatic rechargeable single cells
- IEC 60624 Expression of the performance of pulse generators
- IEC 60626 Combined flexible materials for electrical insulation
- IEC 60627 Diagnostic X-ray imaging equipment – Characteristics of general purpose and mammographic anti-scatter grids
- IEC 60628 Gassing of insulating liquids under electrical stress and ionization
- IEC 60630 Maximum lamp outlines for incandescent lamps
- IEC 60633 Terminology for high-voltage direct current (HVDC) transmission
- IEC 60635 Toroidal strip-wound cores made of magnetically soft material
- IEC 60636 Flexible waveguide assembly performance
- IEC TR 60638 Criteria for assessing and coding of the commutation of rotating electrical machines for traction
- IEC 60641 Pressboard and presspaper for electrical purposes
- IEC 60642 Piezoelectric ceramic resonator units
- IEC 60644 Specification for high-voltage fuse-links for motor circuit applications
- IEC 60645 Electroacoustics – Audiometric equipment
- IEC 60648 Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation
- IEC 60651 Sound level meters (Withdrawn, replaced by IEC 61672-1:2002 and IEC 61672-2:2003)
- IEC 60652 Loading tests on overhead line structures
- IEC 60654 Industrial-process measurement and control equipment – Operating conditions
- IEC 60657 Non-ionizing radiation hazards in the frequency range from 10 MHz to 300 000 MHz
- IEC 60660 Insulators – Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
- IEC 60661 Methods for measuring the performance of electric household coffee makers
- IEC 60662 High-pressure sodium vapour lamps – Performance specifications
- IEC 60663 Planning of (single-sideband) power line carrier systems
- IEC 60664 Insulation coordination for equipment within low-voltage systems
- IEC 60665 A.C. electric ventilating fans and regulators for household and similar purposes
- IEC 60666 Detection and determination of specified additives in mineral insulating oils
- IEC 60667 Specification for vulcanized fibre for electrical purposes
- IEC TR 60668 Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-process measurement and control instruments
- IEC 60669 Switches for household and similar fixed-electrical installations
- IEC 60670 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations
- IEC 60671 Nuclear power plants – Instrumentation and control systems important to safety – Surveillance testing
- IEC 60672 Ceramic and glass insulating materials
- IEC 60674 Specification for plastic films for electrical purposes
- IEC 60675 Household electric direct-acting room heaters – Methods for measuring performance
- IEC 60676 Industrial electroheating equipment – Test methods for direct arc furnaces
- IEC 60677 Block transfers in CAMAC systems
- IEC 60679 Piezoelectric, dielectric and electrostatic oscillators of assessed quality
- IEC TS 60680 Test methods of plasma equipment for electroheat and electrochemical applications
- IEC 60682 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
- IEC 60683 Industrial electroheating equipment – Test methods for submerged-arc furnaces
- IEC 60684 Flexible insulating sleeving
- IEC 60688 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
- IEC 60689 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
- IEC 60691 Thermal-links – Requirements and application guide
- IEC 60692 Nuclear instrumentation – Density gauges utilizing ionizing radiation – Definitions and test methods
- IEC 60694 Common Specifications For High-Voltage Switchgear and Control gear Standards (Withdrawn, replaced by IEC 62271-1:2007)
- IEC 60695 Fire hazard testing
- IEC 60700 Thyristor valves for high voltage direct current (HVDC) power transmission
- IEC 60702 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V
- IEC 60703 Test methods for electroheating installations with electron guns
- IEC 60704 Household and similar electrical appliances – Test code for the determination of airborne acoustical noise
- IEC 60705 Household microwave ovens – Methods for measuring performance
- IEC 60706 Maintainability of equipment
- IEC 60708 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
- IEC 60709 Nuclear power plants – Instrumentation and control systems important to safety – Separation
- IEC 60712 Helical-scan video-tape cassette system using 19 mm (3/4 in) magnetic tape, known as U-format
- IEC 60713 Subroutines for CAMAC
- IEC 60715 Dimensions of low-voltage switchgear and control gear – Standardized mounting on rails for mechanical support of switchgear, control gear and accessories
- IEC 60717 Method for the determination of the space required by capacitors and resistors with unidirectional terminations
- IEC 60719 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
- IEC 60720 Characteristics of line post insulators
- IEC 60721 Classification of environmental conditions
- IEC 60724 Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
- IEC TR 60725 Consideration of reference impedances and public supply network impedances for use in determining the disturbance characteristics of electrical equipment having a rated current ≤75 A per phase
- IEC 60726 Dry type power transformers
- IEC 60728 Cable networks for television signals, sound signals and interactive services
- IEC 60729 Multiple controllers in a CAMAC crate
- IEC 60730 Automatic electrical controls
- IEC 60731 Medical electrical equipment – Dosimeters with ionization chambers as used in radiotherapy
- IEC 60732 Measuring methods for cylinder cores, tube cores and screw cores of magnetic oxides
- IEC 60734 Household electrical appliances – Performance – Water for testing
- IEC 60735 Measuring methods for video tape properties
- IEC TR 60736 Testing equipment for electrical energy meters
- IEC 60737 Nuclear power plants – Instrumentation important to safety – Temperature sensors (in-core and primary coolant circuit) – Characteristics and test methods
- IEC 60738 Thermistors – Directly heated positive temperature coefficient
- IEC 60740 Laminations for transformers and inductors
- IEC 60743 Live working – Terminology for tools, devices and equipment
- IEC 60744 Safety logic assemblies of nuclear power plants – Characteristics and test methods
- IEC 60745 Hand-held motor-operated electric tools – Safety
- IEC 60746 Expression of performance of electrochemical analyzers
- IEC 60747 Semiconductor devices
- IEC 60748 Semiconductor devices – Integrated circuits
- IEC 60749 Semiconductor devices – Mechanical and climatic test methods
- IEC 60750 Item designation in electrotechnology (Withdrawn! This publication has been replaced by IEC 61346-1:1996)
- IEC 60751 Industrial platinum resistance thermometers and platinum temperature sensors
- IEC 60754 Test on gases evolved during combustion of materials from cables
- IEC TR 60755 General requirements for residual current operated protective devices
- IEC 60756 Non-broadcast video tape recorders – Time base stability
- IEC 60757 Code for designation of colours
- IEC 60758 Synthetic quartz crystal – Specifications and guidelines for use
- IEC 60759 Standard test procedures for semiconductor X-ray energy spectrometers
- IEC 60760 Flat, quick-connect terminations (merged into IEC 61210:2010-08)
- IEC 60761 Equipment for continuous monitoring of radioactivity in gaseous effluents
- IEC 60763 Laminated pressboard for electrical purposes
- IEC 60767 Helical-scan video-tape cassette system using 12.65 mm (0.5 in) magnetic tape on type beta-format
- IEC 60768 Nuclear power plants – Instrumentation important to safety – Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
- IEC 60770 Transmitters for use in industrial-process control systems
- IEC 60772 Electrical penetration assemblies in containment structures for nuclear power generating stations
- IEC 60773 Test methods and apparatus for measurement of the operational characteristics of brushes
- IEC 60774 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS
- IEC 60775 Real-time BASIC for CAMAC
- IEC TR 60778 Brush-holders for slip-rings, Group R – type RA
- IEC 60779 Industrial electroheat equipment – Test methods for electroslag remelting furnaces
- IEC TR 60782 Measurements of ultrasonic magnetostrictive transducers
- IEC TR 60788 Medical electrical equipment – Glossary of defined terms
- IEC 60793 Optical fibres
- IEC 60794 Optical fibre cables
- IEC 60796 Microprocessor system bus – 8-bit and 16-bit data (MULTIBUS I)
- IEC TR 60797 Residual strength of string insulator units of glass or ceramic material for overhead lines after mechanical damage of the dielectric
- IEC 60799 Electrical accessories – Cord sets and interconnection cord sets
- IEC 60800 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
- IEC 60801 EMI and RFI Immunity (Withdrawn)
- IEC 60803 Recommended dimensions for hexagonal and square crimping-die cavities, indentors, ganges, outer conductor crimp sleeves and centre contact crimp barrels for R.F. cables and connectors
- IEC 60805 Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines operating as pumps
- IEC 60806 Determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis
- IEC 60807 Rectangular connectors for frequencies below 3 MHz
- IEC 60809 Lamps for road vehicles – Dimensional, electrical and luminous requirements
- IEC 60810 Lamps for road vehicles – Performance requirements
- IEC 60811 Electric and optical fibre cables – Test methods for non-metallic materials
- IEC 60812 Analysis techniques for system reliability – Procedure for failure mode and effects analysis (FMEA)
- IEC 60814 Insulating liquids – Oil-impregnated paper and pressboard – Determination of water by automatic coulometric Karl Fischer titration
- IEC TS 60815 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions
- IEC TS 60816 Guide on methods of measurement of short duration transients on low-voltage power and signal lines
- IEC 60819 Non-cellulosic papers for electrical purposes
- IEC 60821 VMEbus – Microprocessor system bus for 1 byte to 4 byte data
- IEC 60822 VSB – Parallel Sub-system Bus of the IEC 60821 VMEbus
- IEC 60824 Terminology related to microprocessors
- IEC 60825 Safety of laser products
- IEC 60826 Design criteria of overhead transmission lines
- IEC 60828 Pin allocations for microprocessor systems using the IEC 60603-2connector
- IEC 60831 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V
- IEC 60832 Live working – Insulating sticks and attachable devices
- IEC 60834 Tele-protection equipment of power systems – Performance and testing
- IEC 60835 Methods of measurement for equipment used in digital microwave radio transmission systems
- IEC 60836 Specifications for unused silicone insulating liquids for electrotechnical purposes
- IEC 60838 Miscellaneous lampholders
- IEC 60839 Alarm and electronic security systems
- IEC 60840 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) – Test methods and requirements
- IEC 60841 Audio recording – PCM encoder/decoder system
- IEC 60843 Helical-scan video tape cassette system using 8 mm magnetic tape – 8 mm video
- IEC 60846 Radiation protection instrumentation – Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation
- IEC 60848 GRAFCET specification language for sequential function charts
- IEC 60849 Sound Systems for Emergency Purposes (Withdrawn)
- IEC 60850 Railway applications – Supply voltages of traction systems
- IEC 60851 Methods of test for winding wires
- IEC 60852 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment
- IEC 60853 Calculation of the cyclic and emergency current rating of cables
- IEC TR 60854 Methods of measuring the performance of ultrasonic pulse-echo diagnostic equipment
- IEC 60855 Live working – Insulating foam-filled tubes and solid rods
- IEC 60856 Prerecorded optical reflective video disk system 'Laser vision' 50 Hz/625 lines – PAL
- IEC 60857 Prerecorded optical reflective video disk system 'Laser vision' 60 Hz/525 lines – M/NTSC
- IEC 60860 Radiation protection instrumentation – Warning equipment for criticality accidents
- IEC 60861 Equipment for monitoring of radionuclides in liquid effluents and surface waters
- IEC 60862 Surface acoustic wave (SAW) filters of assessed quality
- IEC 60864 Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment
- IEC 60865 Short-circuit currents – Calculation of effects
- IEC 60867 Insulating liquids – Specifications for unused liquids based on synthetic aromatic hydrocarbons
- IEC 60869 Fibre optic interconnecting devices and passive components – Fibre optic passive power control devices
- IEC 60870 Telecontrol equipment and systems
- IEC 60871 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V
- IEC 60873 Electrical and pneumatic analogue chart recorders for use in industrial-process systems
- IEC 60874 Fibre optic interconnecting devices and passive components – Connectors for optical fibres and cables
- IEC 60875 Fibre optic interconnecting devices and passive components – Non-wavelength-selective fibre optic branching devices
- IEC 60876 Fibre optic interconnecting devices and passive components – Fibre optic spatial switches
- IEC TR 60877 Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service
- IEC TR 60878 Graphical symbols for electrical equipment in medical practice
- IEC 60879 Performance and construction of electric circulating fans and regulators
- IEC 60880 Nuclear power plants – Instrumentation and control systems important to safety – Software aspects for computer-based systems performing category A functions
- IEC 60882 Pre-heat requirements for starterless tubular fluorescent lamps
- IEC 60883 Measuring method for chrominance signal-to-random noise ratio for video tape recorders
- IEC 60884 Plugs and socket-outlets for household and similar purposes
- IEC 60885 Electrical test methods for electric cables
- IEC TR 60886 Investigations on test procedures for ultrasonic cleaners
- IEC TR 60887 Glass bulb designation system for lamps
- IEC 60888 Zinc-coated steel wires for stranded conductors
- IEC 60889 Hard-drawn aluminium wire for overhead line conductors
- IEC TR 60890 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
- IEC 60891 Photovoltaic devices – Procedures for temperature and irradiance corrections to measured I-V characteristics
- IEC 60893 Insulating materials – Industrial rigid laminated sheets based on thermosetting resins for electrical purposes
- IEC 60895 Live working – Conductive clothing for use at nominal voltage up to 800 kV a.c. and +/- 600 kV d.c.
- IEC 60896 Stationary lead-acid batteries
- IEC 60897 Methods for the determination of the lightning breakdown voltage of insulating liquids
- IEC 60898 Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations
- IEC TS 60899 Sampling rate and source encoding for professional digital audio recording
- IEC 60900 Live working – Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.
- IEC 60901 Single-capped fluorescent lamps – Performance specifications
- IEC 60903 Live working – Electrical insulating gloves
- IEC 60904 Photovoltaic devices
- IEC 60906 IEC system of plugs and socket-outlets for household and similar purposes
- IEC 60908 Audio recording – Compact disc digital audio system
- IEC 60909 Short-circuit currents in three-phase a.c. systems
- IEC 60910 Containment monitoring instrumentation for early detection of developing deviations from normal operation in light water reactors
- IEC 60911 Measurements for monitoring adequate cooling within the core of pressurized light water reactors
- IEC 60912 Nuclear instrumentation – ECL (emitter coupled logic) front panel interconnections in counter logic
- IEC 60913 Railway applications – Fixed installations – Electric traction overhead contact lines
- IEC 60915 Capacitors and resistors for use in electronic equipment – Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
- IEC 60917 Modular order for the development of mechanical structures for electronic equipment practices
- IEC 60918 PVC insulated ribbon cable with a pitch of 1.27 mm suitable for insulation displacement termination
- IEC TR 60919 Performance of high-voltage direct current (HVDC) systems with line-commutated converters
- IEC 60921 Ballasts for tubular fluorescent lamps – Performance requirements
- IEC 60923 Auxiliaries for lamps – Ballasts for discharge lamps (excluding tubular fluorescent lamps) – Performance requirements
- IEC 60927 Auxiliaries for lamps – Starting devices (other than glow starters)- Performance requirements
- IEC 60929 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps – Performance requirements
- IEC TR 60930 Guidelines for administrative, medical and nursing staff concerned with the safe use of medical electrical equipment and medical electrical systems
- IEC 60931 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V
- IEC 60933 Audio, video and audiovisual systems – Interconnections and matching values
- IEC 60934 Circuit-breakers for equipment (CBE)
- IEC 60935 Nuclear instrumentation – Modular high speed data acquisition system – FASTBUS
- IEC 60938 Fixed inductors for electromagnetic interference suppression
- IEC 60939 Passive filter units for electromagnetic interference suppression
- IEC 60940 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression
- IEC 60942 Electroacoustics – Sound calibrators
- IEC TR 60943 Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
- IEC 60944 Guide for the maintenance of silicone transformer liquids
- IEC 60945 Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
- IEC 60946 Binary direct voltage signals for process measurement and control systems
- IEC 60947 Low-voltage switchgear and control gear
- IEC 60948 Numeric keyboard for home electronic systems (HES)
- IEC 60949 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
- IEC 60950 Information technology equipment – Safety
- IEC 60951 Nuclear power plants – Instrumentation important to safety – Radiation monitoring for accident and post-accident conditions
- IEC 60952 Aircraft batteries
- IEC 60953 Rules for steam turbine thermal acceptance tests
- IEC 60958 Digital audio interface
- IEC 60960 Functional design criteria for a safety parameter display system for nuclear power stations
- IEC 60961 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type L
- IEC 60963 Specification for unused polybutenes
- IEC 60964 Nuclear power plants – Control rooms – Design
- IEC 60965 Nuclear power plants – Control rooms – Supplementary control room for reactor shutdown without access to the main control room
- IEC 60966 Radio frequency and coaxial cable assemblies
- IEC 60968 Self-ballasted fluorescent lamps for general lighting services – Safety requirements
- IEC 60969 Self-ballasted compact fluorescent lamps for general lighting services – Performance requirements
- IEC 60970 Insulating liquids – Methods for counting and sizing particles
- IEC 60973 Test procedures for germanium gamma-ray detectors
- IEC 60974 Arc welding equipment
- IEC 60976 Medical electrical equipment – Medical electron accelerators – Functional performance characteristics
- IEC TR 60977 Medical electrical equipment – Medical electron accelerators – Guidelines for functional performance characteristics
- IEC 60979 Wires for wire wrapping applications
- IEC 60980 Recommended practices for seismic qualification of electrical equipment of the safety system for nuclear generating stations
- IEC 60981 Extra heavy-duty electrical rigid steel conduits
- IEC 60982 Level measuring systems utilizing ionizing radiation with continuous or switching output
- IEC 60983 Miniature lamps
- IEC 60984 Live working – Electrical insulating sleeves
- IEC 60986 Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
- IEC 60987 Nuclear power plants – Instrumentation and control important to safety – Hardware design requirements for computer-based systems
- IEC 60988 Nuclear power plants – Instrumentation important to safety – Acoustic monitoring systems for detection of loose parts: characteristics, design criteria and operational procedures
- IEC 60989 Separating transformers, autotransformers, variable transformers and reactors
- IEC 60990 Methods of measurement of touch current and protective conductor current
- IEC 60993 Electrolyte for vented nickel-cadmium cells
- IEC 60994 Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
- IEC TR 60996 Method for verifying accuracy of tan delta measurements applicable to capacitors
- IEC 60998 Connecting devices for low-voltage circuits for household and similar purposes
- IEC 60999 Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units
- IEC 61000 Electromagnetic compatibility (EMC)
- IEC 61003 Industrial-process control systems – Instruments with analogue inputs and two- or multi-position outputs
- IEC 61005 Radiation protection instrumentation – Neutron ambient dose equivalent (rate) meters
- IEC 61007 Transformers and inductors for use in electronic and telecommunication equipment – Measuring methods and test procedures
- IEC 61008 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
- IEC 61009 Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs)
- IEC 61010 Safety requirements for electrical equipment for measurement, control, and laboratory use
- IEC 61012 Filters for the measurement of audible sound in the presence of ultrasound
- IEC 61014 Programmes for reliability growth
- IEC TR 61015 Brush-holders for electrical machines. Guide to the measurement of the static thrust applied to brushes
- IEC 61016 Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1)
- IEC 61017 Radiation protection instrumentation – Transportable, mobile or installed equipment to measure photon radiation for environmental monitoring
- IEC 61018 Surface acoustic wave (SAW) resonators
- IEC 61020 Electromechanical switches for use in electrical and electronic equipment
- IEC 61021 Laminated core packages for transformers and inductors used in telecommunication and electronic equipment
- IEC 61023 Maritime navigation and radiocommunication equipment and systems – Marine speed and distance measuring equipment (SDME) – Performance requirements, methods of testing and required test results
- IEC 61024 Protection of structures against lightning (Withdrawn, replaced by parts of IEC 62305)
- IEC 61025 Fault tree analysis (FTA)
- IEC 61028 Electrical measuring instruments – X-Y recorders
- IEC 61029 Safety of transportable motor-operated electric tools
- IEC 61030 Domestic Digital Bus – a standard for a low-speed multi-master serial communication bus for home automation applications. (Withdrawn)
- IEC 61031 Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use in nuclear power plants during normal operation and anticipated operational occurrences
- IEC 61032 Protection of persons and equipment by enclosures – Probes for verification
- IEC 61033 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
- IEC 61034 Measurement of smoke density of cables burning under defined conditions
- IEC 61039 Classification of insulating liquids
- IEC 61041 Non-broadcast video tape recorders. Methods of measurement
- IEC 61043 Electroacoustics – Instruments for the measurement of sound intensity – Measurements with pairs of pressure sensing microphones
- IEC TR 61044 Opportunity-charging of lead-acid traction batteries
- IEC 61047 DC or AC supplied electronic step-down converters for filament lamps – Performance requirements
- IEC 61048 Auxiliaries for lamps – Capacitors for use in tubular fluorescent and other discharge lamp circuits – General and safety requirements
- IEC 61049 Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
- IEC 61050 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers). General and safety requirements
- IEC 61051 Varistors for use in electronic equipment
- IEC 61052 IEC 1052 FASTBUS standard routines. Standard routines for use with FASTBUS data acquisition system
- IEC 61053 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type Beta format – FM audio recording
- IEC TR 61055 Measurement techniques and operational adjustments of broadcast VTRs
- IEC 61056 General purpose lead-acid batteries (valve-regulated types)
- IEC 61058 Switches for appliances
- IEC 61061 Non-impregnated densified laminated wood for electrical purposes
- IEC 61063 Acoustics – Measurement of airborne noise emitted by steam turbines and driven machinery
- IEC 61064 Acceptance tests for steam turbine speed control systems
- IEC 61065 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
- IEC 61067 Specification for glass and glass polyester fibre woven tapes
- IEC 61068 Specification for polyester fibre woven tapes
- IEC 61069 Industrial-process measurement, control and automation – Evaluation of system properties for the purpose of system assessment
- IEC 61070 Compliance test procedures for steady-state availability
- IEC 61071 Capacitors for power electronics
- IEC 61073 Fibre optic interconnecting devices and passive components – Mechanical splices and fusion splice protectors for optical fibres and cables
- IEC 61076 Connectors for electronic equipment – Product requirements
- IEC 61077 Helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type VHS – Compact VHS video cassette
- IEC 61078 Reliability block diagrams
- IEC 61079 Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band
- IEC 61080 Guide to the measurement of equivalent electrical parameters of quartz crystal units
- IEC TS 61081 Pneumatic instruments driven by associated process gas – Safe installation and operating procedures – Guidelines
- IEC 61082 Preparation of documents used in electrotechnology
- IEC 61083 Instruments and software used for measurement in high-voltage and high-current tests
- IEC 61084 Cable trunking systems and cable ducting systems for electrical installations
- IEC TS 61085 General considerations for telecommunication services for electric power systems
- IEC 61086 Coatings for loaded printed wire boards (conformal coatings)
- IEC TR 61088 Characteristics and measurements of ultrasonic piezoceramic transducers
- IEC 61089 Round wire concentric lay overhead electrical stranded conductors
- IEC 61094 Measurement microphones
- IEC 61095 Electromechanical contactors for household and similar purposes
- IEC 61096 Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
- IEC 61097 Global maritime distress and safety system (GMDSS)
- IEC 61098 Radiation protection instrumentation – Installed personnel surface contamination monitoring assemblies
- IEC 61099 Insulating liquids – Specifications for unused synthetic organic esters for electrical purposes
- IEC 61104 Compact disc video system – 12 cm CD-V
- IEC 61105 Reference tapes for video tape recorder systems
- IEC 61106 Videodisks – Methods of measurement for parameters
- IEC 61108 Maritime navigation and radiocommunication equipment and systems – Global navigation satellite systems (GNSS)
- IEC 61109 Insulators for overhead lines – Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V – Definitions, test methods and acceptance criteria
- IEC 61111 Live working – Electrical insulating matting
- IEC 61112 Live working – Electrical insulating blankets
- IEC 61114 Receiving antennas for satellite broadcast transmissions in the 11/12 GHz band
- IEC 61115 Expression of performance of sample handling systems for process analyzers
- IEC 61116 Electromechanical equipment guide for small hydroelectric installations
- IEC 61118 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape – Type M2
- IEC 61119 Digital audio tape cassette system (DAT)
- IEC 61120 Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use
- IEC 61121 Tumble dryers for household use – Methods for measuring the performance
- IEC 61123 Reliability testing – Compliance test plans for success ratio
- IEC 61124 Reliability testing – Compliance tests for constant failure rate and constant failure intensity
- IEC 61125 Unused hydrocarbon based insulating liquids – Test methods for evaluating the oxidation stability
- IEC 61126 Procedure for use in the preparation of maximum lamp outlines
- IEC TR 61127 High pressure xenon short arc lamps – Dimensional, electrical and photometric data and cap types
- IEC 61131 Industrial-process measurement and control – Programmable controllers
- IEC 61133 Railway applications – Rolling stock – Testing of rolling stock on completion of construction and before entry into service
- IEC 61138 Cables for portable earthing and short-circuiting equipment
- IEC 61140 Protection against electric shock – Common aspects for installation and equipment
- IEC TR 61141 Upper frequency limit of r.f. coaxial connectors
- IEC 61143 Electrical measuring instruments – X-t recorders
- IEC 61144 Test method for the determination of oxygen index of insulating liquids
- IEC 61145 Calibration and usage of ionization chamber systems for assay of radionuclides
- IEC 61146 Video cameras (PAL/SECAM/NTSC) – Methods of measurement
- IEC 61148 Terminal markings for valve device stacks and assemblies and for power conversion equipment
- IEC TS 61149 Guide for safe handling and operation of mobile radio equipment
- IEC 61152 Dimensions of metal-sheathed thermometer elements
- IEC 61156 Multicore and symmetrical pair/quad cables for digital communications
- IEC 61157 Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
- IEC 61158 Industrial communication networks – Fieldbus specifications
- IEC 61160 Design review
- IEC 61161 Ultrasonics – Power measurement – Radiation force balances and performance requirements
- IEC 61162 Maritime navigation and radiocommunication equipment and systems – Digital interfaces
- IEC 61163 Reliability stress screening
- IEC 61164 Reliability growth – Statistical test and estimation methods
- IEC 61165 Application of Markov techniques
- IEC 61167 Metal halide lamps – Performance specification
- IEC 61168 Radiotherapy simulators – Functional performance characteristics
- IEC 61169 Radio frequency connectors
- IEC TS 61170 Radiotherapy simulators – Guidelines for functional performance characteristics
- IEC 61171 Radiation protection instrumentation – Monitoring equipment – Atmospheric radioactive iodines in the environment
- IEC 61172 Radiation protection instrumentation – Monitoring equipment – Radioactive aerosols in the environment
- IEC 61174 Maritime navigation and radiocommunication equipment and systems – Electronic chart display and information system (ECDIS) – Operational and performance requirements, methods of testing and required test results
- IEC 61175 Industrial systems, installations and equipment and industrial products – Designation of signals
- IEC 61176 Hand-held electric mains voltage operated circular saws – Methods for measuring the performance
- IEC 61178 Quartz crystal units – A specification in the IEC Quality Assessment System for Electronic Components (IECQ)
- IEC 61179 Helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M)
- IEC 61180 High-voltage test techniques for low-voltage equipment – Definitions, test and procedure requirements, test equipment
- IEC 61181 Mineral oil-filled electrical equipment – Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
- IEC PAS 61182 Generic requirements for printed board assembly products manufacturing description data and transfer methodology
- IEC 61183 Electroacoustics – Random-incidence and diffuse-field calibration of sound level meters
- IEC 61184 Bayonet lampholders
- IEC 61187 Electrical and electronic measuring equipment – Documentation
- IEC 61188 Printed boards and printed board assemblies – Design and use
- IEC 61189 Test methods for electrical materials, interconnection structures and assemblies
- IEC 61190 Attachment materials for electronic assembly
- IEC 61191 Printed board assemblies
- IEC 61192 Workmanship requirements for soldered electronic assemblies
- IEC 61193 Quality assessment systems
- IEC 61194 Characteristic parameters of stand-alone photovoltaic (PV) systems (Withdrawn, replaced by IEC TS 61836:2007)
- IEC 61195 Double-capped fluorescent lamps – Safety specifications
- IEC 61196 Coaxial communication cables
- IEC 61197 Insulating liquids – Linear flame propagation – Test method using a glass-fibre tape
- IEC 61198 Mineral insulating oils – Methods for the determination of 2-furfural and related compounds
- IEC 61199 Single-capped fluorescent lamps – Safety specifications
- IEC 61200 Electrical installation guide
- IEC TS 61201 Use of conventional touch voltage limits – Application guide
- IEC 61203 Synthetic organic esters for electrical purposes – Guide for maintenance of transformer esters in equipment
- IEC 61204 Low-voltage power supply devices, d.c. output – Performance characteristics
- IEC 61205 Ultrasonics – Dental descaler systems – Measurement and declaration of the output characteristics
- IEC TS 61206 Ultrasonics – Continuous-wave Doppler systems – Test procedures
- IEC 61207 Expression of performance of gas analyzers
- IEC 61210 Connecting devices – Flat quick-connect terminations for electrical copper conductors – Safety requirements
- IEC 61211 Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V – Impulse puncture testing in air
- IEC 61212 Insulating materials – Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes
- IEC 61213 Analogue audio recording on video tape – Polarity of magnetization
- IEC 61215 Terrestrial photovoltaic (PV) modules – Design qualification and type approval
- IEC 61217 Radiotherapy equipment – Coordinates, movements and scales
- IEC 61219 Live working – Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device – Lance earthing
- IEC 61223 Evaluation and routine testing in medical imaging departments
- IEC 61224 Nuclear reactors – Response time in resistance temperature detectors (RTD) – In situ measurements
- IEC 61225 Nuclear power plants – Instrumentation and control systems important to safety – Requirements for electrical supplies
- IEC 61226 Nuclear power plants – Instrumentation and control important to safety – Classification of instrumentation and control functions
- IEC 61227 Nuclear power plants – Control rooms – Operator controls
- IEC 61228 Fluorescent ultraviolet lamps used for tanning – Measurement and specification method
- IEC 61229 Rigid protective covers for live working on a.c. installations
- IEC 61230 Live working – Portable equipment for earthing or earthing and short-circuiting
- IEC 61231 International lamp coding system (ILCOS)
- IEC 61232 Aluminium-clad steel wires for electrical purposes
- IEC 61234 Method of test for the hydrolytic stability of electrical insulating materials
- IEC 61235 Live working – Insulating hollow tubes for electrical purposes
- IEC 61236 Live working – Saddles, stick clamps and their accessories
- IEC 61237 Broadcast video tape recorders – Methods of measurement
- IEC 61238 Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV)
- IEC 61239 Nuclear instrumentation – Portable gamma radiation meters and spectrometers used for prospecting – Definitions, requirements and calibration
- IEC 61240 Piezoelectric devices – Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection – General rules
- IEC 61241 Electrical apparatus for use in the presence of combustible dust (Withdrawn)
- IEC 61242 Electrical accessories – Cable reels for household and similar purposes
- IEC 61243 Live working – Voltage detectors
- IEC TS 61244 Determination of long-term radiation ageing in polymers
- IEC TS 61245 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems
- IEC 61247 PM-cores made of magnetic oxides and associated parts – Dimensions
- IEC 61248 Transformers and inductors for use in electronic and telecommunication equipment
- IEC 61249 Materials for printed boards and other interconnecting structures
- IEC 61250 Nuclear reactors – Instrumentation and control systems important for safety – Detection of leakage in coolant systems
- IEC 61251 Electrical insulating materials and systems – AC voltage endurance evaluation
- IEC 61252 Electroacoustics – Specifications for personal sound exposure meters
- IEC 61253 Piezoelectric ceramic resonators – A specification in the IEC quality assessment system for electronic components (IECQ)
- IEC 61254 Electric shavers for household use – Methods for measuring the performance
- IEC 61256 Radiation protection instrumentation – Installed monitors for the detection of radioactive contamination of laundry
- IEC TR 61258 Guidelines for the development and use of medical electrical equipment educational materials
- IEC 61260 Electroacoustics – Octave-band and fractional-octave-band filters
- IEC 61261 Piezoelectric ceramic filters for use in electronic equipment – A specification in the IEC quality assessment system for electronic components (IECQ)
- IEC 61262 Medical electrical equipment – Characteristics of electro-optical X-ray image intensifiers
- IEC 61265 Electroacoustics – Instruments for measurement of aircraft noise – Performance requirements for systems to measure one-third-octave-band sound pressure levels in noise certification of transport-category aeroplanes
- IEC 61266 Ultrasonics – Hand-held probe Doppler foetal heartbeat detectors – Performance requirements and methods of measurement and reporting
- IEC 61267 Medical diagnostic X-ray equipment – Radiation conditions for use in the determination of characteristics
- IEC 61270 Capacitors for microwave ovens
- IEC 61274 Fibre optic interconnecting devices and passive components – Adaptors for fibre optic connectors
- IEC 61275 Radiation protection instrumentation – Measurement of discrete radionuclides in the environment – In situ photon spectrometry system using a germanium detector
- IEC 61277 Terrestrial photovoltaic (PV) power generating systems – General and guide (Withdrawn)
- IEC 61280 Fibre optic communication subsystem basic test procedures
- IEC 61281 Fibre optic communication subsystems
- IEC TR 61282 Fibre optic communication system design guides
- IEC 61284 Overhead lines – Requirements and tests for fittings
- IEC 61285 Industrial-process control – Safety of analyser houses
- IEC 61286 Character set with electrotechnical symbols (Withdrawn)
- IEC 61287 Railway applications – Power converters installed on board rolling stock
- IEC TR 61289 High frequency surgical equipment – Operation and maintenance
- IEC 61290 Optical amplifiers – Test methods
- IEC 61291 Optical amplifiers
- IEC TR 61292 Optical amplifiers
- IEC 61293 Marking of electrical equipment with ratings related to electrical supply – Safety requirements
- IEC TR 61294 Insulating liquids – Determination of the partial discharge inception voltage (PDIV) – Test procedure
- IEC TR 61295 Calibration tapes for broadcast VTRs
- IEC 61297 Industrial-process control systems – Classification of adaptive controllers for the purpose of evaluation
- IEC 61298 Process measurement and control devices – General methods and procedures for evaluating performance
- IEC 61300 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures
- IEC 61301 Nuclear instrumentation – Digital bus for NIM instruments
- IEC 61302 Electrical insulating materials – Method to evaluate the resistance to tracking and erosion – Rotating wheel dip test
- IEC 61303 Medical electrical equipment – Radionuclide calibrators – Particular methods for describing performance
- IEC 61304 Nuclear instrumentation – Liquid-scintillation counting systems – Performance verification
- IEC 61305 Household high-fidelity audio equipment and systems – Methods of measuring and specifying the performance
- IEC 61307 Industrial microwave heating installations – Test methods for the determination of power output
- IEC 61308 High-frequency dielectric heating installations – Test methods for the determination of power output
- IEC 61309 Deep-fat fryers for household use – Methods for measuring the performance
- IEC 61310 Safety of machinery – Indication, marking and actuation
- IEC 61314 Fibre optic interconnecting devices and passive components – Fibre optic fan-outs
- IEC 61315 Calibration of fibre-optic power meters
- IEC 61316 Industrial cable reels
- IEC 61318 Live working – Conformity assessment applicable to tools, devices and equipment
- IEC 61319 Interconnections of satellite receiving equipment
- IEC 61322 Radiation protection instrumentation – Installed dose equivalent rate meters, warning assemblies and monitors for neutron radiation of energy from thermal to 15 MeV
- IEC 61325 Insulators for overhead lines with a nominal voltage above 1000 V – Ceramic or glass insulator units for d.c. systems – Definitions, test methods and acceptance criteria
- IEC 61326 Electrical equipment for measurement, control and laboratory use – EMC requirements
- IEC 61327 Helical-scan digital composite video cassette recording system using 12,65 mm (0,5 in) magnetic tape – Format D-3
- IEC 61328 Live working – Guidelines for the installation of transmission and distribution line conductors and earth wires – Stringing equipment and accessory items
- IEC 61329 Sound system equipment – Methods of measuring and specifying the performance of sounders (electroacoustic transducers for tone production)
- IEC 61331 Protective devices against diagnostic medical X-radiation
- IEC 61332 Soft ferrite material classification
- IEC 61333 Marking on U and E ferrite cores
- IEC 61334 Distribution automation using distribution line carrier systems – a standard for low-speed reliable power line communications by electricity meters, water meters and SCADA[1]
- IEC 61335 Nuclear instrumentation – Bore-hole apparatus for X-ray fluorescence analysis
- IEC 61336 Nuclear instrumentation – Thickness measurement systems utilizing ionizing radiation – Definitions and test methods
- IEC 61337 Filters using waveguide type dielectric resonators
- IEC 61338 Waveguide type dielectric resonators
- IEC 61340 Electrostatics
- IEC 61341 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
- IEC 61343 Nuclear reactor instrumentation – Boiling light water reactors (BWR) – Measurements in the reactor vessel for monitoring adequate cooling within the core
- IEC 61345 UV test for photovoltaic (PV) modules (Withdrawn)
- IEC 61346 Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations (Withdrawn, replaced by IEC 81346)
- IEC 61347 Lamp control gear
- IEC TR 61352 Mnemonics and symbols for integrated circuits
- IEC 61355 Classification and designation of documents for plants, systems and equipment
- IEC 61360 Standard data element types with associated classification scheme
- IEC 61362 Guide to specification of hydraulic turbine control systems
- IEC 61363 Electrical installations of ships and mobile and fixed offshore units
- IEC TR 61364 Nomenclature for hydroelectric powerplant machinery
- IEC TR 61366 Hydraulic turbines, storage pumps and pump-turbines – Tendering Documents
- IEC TS 61370 Steam turbines – Steam purity
- IEC 61373 Railway applications – Rolling stock equipment – Shock and vibration tests
- IEC 61375 Electronic railway equipment – Train communication network (TCN)
- IEC 61377 Railway applications – Rolling stock – Combined test method for traction systems
- IEC 61378 Converter transformers
- IEC 61386 Conduit systems for cable management
- IEC TS 61390 Ultrasonics – Real-time pulse-echo systems – Test procedures to determine performance specifications
- IEC 61391 Ultrasonics – Pulse-echo scanners
- IEC 61394 Overhead lines – Requirements for greases for aluminium, aluminium alloy and steel bare conductors
- IEC 61395 Overhead electrical conductors – Creep test procedures for stranded conductors
- IEC 61400 Wind turbines
- IEC 61427 Secondary cells and batteries for renewable energy storage – General requirements and methods of test
- IEC 61429 Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135
- IEC TS 61430 Secondary cells and batteries – Test methods for checking the performance of devices designed for reducing explosion hazards – Lead-acid starter batteries
- IEC TR 61431 Guide for the use of monitor systems for lead-acid traction batteries
- IEC 61434 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Guide to designation of current in alkaline secondary cell and battery standards
- IEC 61435 Nuclear instrumentation – High-purity germanium crystals for radiation detectors – Measurement methods of basic characteristics
- IEC TR 61438 Possible safety and health hazards in the use of alkaline secondary cells and batteries – Guide to equipment manufacturers and users
- IEC 61439 Low-voltage switchgear and control gear assemblies
- IEC 61442 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
- IEC 61443 Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV)
- IEC 61445 Digital Test Interchange Format (DTIF)
- IEC 61452 Nuclear instrumentation – Measurement of gamma-ray emission rates of radionuclides – Calibration and use of germanium spectrometers
- IEC 61453 Nuclear instrumentation – Scintillation gamma ray detector systems for the assay of radionuclides – Calibration and routine tests
- IEC 61462 Composite hollow insulators – Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V – Definitions, test methods, acceptance criteria and design recommendations
- IEC TS 61463 Bushings – Seismic qualification
- IEC TS 61464 Insulated bushings – Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the main insulation (generally paper)
- IEC 61466 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V
- IEC 61467 Insulators for overhead lines – Insulator strings and sets for lines with a nominal voltage greater than 1 000 V – AC power arc tests
- IEC 61468 Nuclear power plants – In-core instrumentation – Characteristics and test methods of self-powered neutron detectors
- IEC 61472 Live working – Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV – A method of calculation
- IEC 61477 Live working – Minimum requirements for the utilization of tools, devices and equipment
- IEC 61478 Live working – Ladders of insulating material
- IEC 61479 Live working – Flexible conductor covers (line hoses) of insulating material
- IEC 61481 Live working – Phase comparators
- IEC 61482 Live working – Protective clothing against the thermal hazards of an electric arc
- IEC 61496 Safety of machinery – Electro-sensitive protective equipment
- IEC 61497 Nuclear power plants – Electrical interlocks for functions important to safety – Recommendations for design and implementation
- IEC 61499 Function blocks
- IEC 61500 Nuclear power plants – Instrumentation and control important to safety – Data communication in systems performing category A functions
- IEC 61501 Nuclear reactor instrumentation – Wide range neutron fluence rate meter – Mean square voltage method
- IEC 61502 Nuclear power plants – Pressurized water reactors – Vibration monitoring of internal structures
- IEC 61504 Nuclear power plants – Instrumentation and control systems important to safety – Plant-wide radiation monitoring
- IEC 61506 Industrial-process measurement and control – Documentation of application software
- IEC 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems
- IEC 61511 Functional safety – safety instrumented systems for the process industry sector
- IEC 61512 Batch control
- IEC 61513 Nuclear power plants – Instrumentation and control important to safety – General requirements for systems
- IEC 61514 Industrial process control systems – Methods of evaluating the performance of valve positioners with pneumatic outputs
- IEC 61515 Mineral insulated thermocouple cables and thermocouples
- IEC 61518 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa)
- IEC 61520 Metal thermowells for thermometer sensors – Functional dimensions
- IEC 61523 Delay and Power Calculation Standards
- IEC 61526 Radiation protection instrumentation – Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations – Direct reading personal dose equivalent meters
- IEC 61534 Powertrack systems
- IEC 61535 Installation couplers intended for permanent connection in fixed installations
- IEC 61537 Cable management – Cable tray systems and cable ladder systems
- IEC 61540 Electrical accessories – Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
- IEC 61543 Residual current-operated protective devices (RCDs) for household and similar use – Electromagnetic compatibility
- IEC 61545 Connecting devices – Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units
- IEC 61547 Equipment for general lighting purposes – EMC immunity requirements
- IEC 61549 Miscellaneous lamps
- IEC 61554 Panel-Mounted equipment – Electrical measuring instruments – Dimensions for panel mounting
- IEC 61557 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures
- IEC 61558 Safety of power transformers, power supplies, reactors and similar products
- IEC 61559 Radiation protection instrumentation in nuclear facilities – Centralized systems for continuous monitoring of radiation and/or levels of radioactivity
- IEC 61560 Radiation protection instrumentation – Apparatus for non-destructive radiation tests of fur and other cloth samples
- IEC 61562 Radiation protection instrumentation – Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs
- IEC 61563 Radiation protection instrumentation – Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs
- IEC 61566 Measurement of exposure to radio-frequency electromagnetic fields – Field strength in the frequency range 100 kHz to 1 GHz
- IEC 61577 Radiation protection instrumentation – Radon and radon decay product measuring instruments
- IEC 61578 Radiation protection instrumentation – Calibration and verification of the effectiveness of radon compensation for alpha and/or beta aerosol measuring instruments – Test methods
- IEC 61580 Measurement of return loss on waveguide and waveguide assemblies
- IEC 61582 Radiation protection instrumentation – In vivo counters – Classification, general requirements and test procedures for portable, transportable and installed equipment
- IEC 61584 Radiation protection instrumentation – Installed, portable or transportable assemblies – Measurement of air kerma direction and air kerma rate
- IEC TS 61586 Estimation of the reliability of electrical connectors
- IEC 61587 Mechanical structures for electronic equipment – Tests for IEC 60917 and IEC 60297 series
- IEC 61588 Precision clock synchronization protocol for networked measurement and control systems
- IEC 61591 Household range hoods – Methods for measuring performance
- IEC TR 61592 Household electrical appliances – Guidelines for consumer panel testing
- IEC 61595 Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use
- IEC TR 61597 Overhead electrical conductors – Calculation methods for stranded bare conductors
- IEC 61599 Videodisk players – Methods of measurement
- IEC TR 61602 Connectors used in the field of audio, video and audiovisual engineering
- IEC 61603 Transmission of audio and/or video and related signals using infra-red radiation
- IEC TR 61604 Dimensions of uncoated ring cores of magnetic oxides (Withdrawn, replaced by IEC 62317-12:2016)
- IEC 61605 Fixed inductors for use in electronic and telecommunication equipment – Marking codes
- IEC 61606 Audio and audiovisual equipment – Digital audio parts – Basic measurement methods of audio characteristics
- IEC 61609 Microwave ferrite components – Guide for the drafting of specifications
- IEC 61610 Prints and transparencies produced from electronic sources – Assessment of image quality
- IEC 61619 Insulating liquids – Contamination by polychlorinated biphenyls (PCBs) – Method of determination by capillary column gas chromatography
- IEC 61620 Insulating liquids – Determination of the dielectric dissipation factor by measurement of the conductance and capacitance – Test method
- IEC 61621 Dry, solid insulating materials – Resistance test to high-voltage, low-current arc discharges
- IEC 61628 Corrugated pressboard and presspaper for electrical purposes
- IEC 61629 Aramid pressboard for electrical purposes
- IEC 61631 Test method for the mechanical strength of cores made of magnetic oxides
- IEC 61636 Software interface for Maintenance Information Collection and Analysis (SIMICA)
- IEC TR 61641 Enclosed low-voltage switchgear and controlgear assemblies – Guide for testing under conditions of arcing due to internal fault
- IEC 61642 Industrial a.c. networks affected by harmonics – Application of filters and shunt capacitors
- IEC 61643 Low-voltage surge protective devices
- IEC 61646 Thin-film terrestrial photovoltaic (PV) modules – Design qualification and type approval (Withdrawn, replaced by IEC 61215)
- IEC 61649 Weibull analysis
- IEC 61650 Reliability data analysis techniques – Procedures for comparison of two constant failure rates and two constant failure (event) intensities
- IEC 61660 Short-circuit currents in d.c. auxiliary installations in power plants and substations
- IEC 61666 Industrial systems, installations and equipment and industrial products – Identification of terminals within a system
- IEC 61669 Electroacoustics – Measurement of real-ear acoustical performance characteristics of hearing aids
- IEC 61671 Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML
- IEC 61672 Electroacoustics – Sound level meters
- IEC 61674 Medical electrical equipment – Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
- IEC 61675 Radionuclide imaging devices – Characteristics and test conditions
- IEC 61676 Medical electrical equipment – Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
- IEC 61683 Photovoltaic systems – Power conditioners – Procedure for measuring efficiency
- IEC 61685 Ultrasonics – Flow measurement systems – Flow test object
- IEC 61689 Ultrasonics – Physiotherapy systems – Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz
- IEC 61690 Electronic design interchange format (EDIF)
- IEC 61691 Behavioural languages
- IEC 61701 Salt mist corrosion testing of photovoltaic (PV) modules
- IEC 61703 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
- IEC 61709 Electric components – Reliability – Reference conditions for failure rates and stress models for conversion
- IEC 61710 Power law model – Goodness-of-fit tests and estimation methods
- IEC 61724 Photovoltaic system performance
- IEC 61725 Analytical expression for daily solar profiles
- IEC 61726 Cable assemblies, cables, connectors and passive microwave components – Screening attenuation measurement by the reverberation chamber method
- IEC 61727 Photovoltaic (PV) systems – Characteristics of the utility interface
- IEC 61730 Photovoltaic (PV) module safety qualification
- IEC TR 61734 Application of symbols for binary logic and analogue elements
- IEC 61739 Integrated circuits
- IEC 61744 Calibration of fibre optic chromatic dispersion test sets
- IEC 61745 End-face image analysis procedure for the calibration of optical fibre geometry test sets
- IEC 61746 Calibration of optical time-domain reflectometers (OTDR)
- IEC 61747 Liquid crystal display devices
- IEC 61753 Fibre optic interconnecting devices and passive components – Performance standard
- IEC 61754 Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces
- IEC 61755 Fibre optic interconnecting devices and passive components – Connector optical interfaces
- IEC 61756 Fibre optic interconnecting devices and passive components – Interface standard for fibre management systems
- IEC 61757 Fibre optic sensors
- IEC 61758 Fibre optic interconnecting devices and passive components – Interface standard for closures
- IEC 61760 Surface mounting technology
- IEC 61770 Electric appliances connected to the water mains – Avoidance of back-siphonage and failure of hose-sets
- IEC 61771 Nuclear power plants – Main control-room – Verification and validation of design
- IEC 61772 Nuclear power plants – Control rooms – Application of visual display units (VDUs)
- IEC 61773 Overhead lines – Testing of foundations for structures
- IEC TS 61774 Overhead lines – Meteorological data for assessing climatic loads
- IEC 61784 Industrial communication networks – Profiles
- IEC 61786 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings
- IEC 61788 Superconductivity
- IEC 61797 Transformers and inductors for use in telecommunication and electronic equipment – Main dimensions of coil formers
- IEC 61800 Adjustable speed electrical power drive systems
- IEC 61803 Determination of power losses in high-voltage direct current (HVDC) converter stations
- IEC TS 61804 Function blocks (FB) for process control
- IEC TR 61807 Magnetic properties of magnetically hard materials at elevated temperatures – Methods of measurement
- IEC 61810 Electromechanical elementary relays
- IEC 61811 Electromechanical telecom elementary relays of assessed quality
- IEC 61812 Time relays for industrial and residential use
- IEC TS 61813 Live working – Care, maintenance and in-service testing of aerial devices with insulating booms
- IEC 61817 Household portable appliances for cooking, grilling and similar use – Methods of measuring performance Household portable appliances for cooking, grilling and similar use – Methods for measuring performance
- IEC 61821 Electrical installations for lighting and beaconing of aerodromes – Maintenance of aeronautical ground lighting constant current series circuits
- IEC 61822 Electrical installations for lighting and beaconing of aerodromes – Constant current regulators
- IEC 61823 Electrical installations for lighting and beaconing of aerodromes – AGL series transformers
- IEC TS 61827 Electrical installations for lighting and beaconing of aerodromes – Characteristics of inset and elevated luminaires used on aerodromes and heliports
- IEC 61828 Ultrasonics – Focusing transducers – Definitions and measurement methods for the transmitted fields
- IEC 61829 Photovoltaic (PV) array – On-site measurement of current-voltage characteristics
- IEC TR 61831 On-line analyser systems – Guide to design and installation
- IEC TR 61832 Design and installation of on-line analyser systems – Guide to technical enquiry and bid evaluation
- IEC 61834 Recording – Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625–50, 1125–60 and 1250-50 systems)
- IEC 61835 Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape – Format D-5
- IEC TS 61836 Solar photovoltaic energy systems – Terms, definitions and symbols
- IEC 61837 Surface mounted piezoelectric devices for frequency control and selection – Standard outlines and terminal lead connections
- IEC TR 61838 Nuclear power plants – Instrumentation and control important to safety – Use of probabilistic safety assessment for the classification of functions
- IEC 61839 Nuclear power plants – Design of control rooms – Functional analysis and assignment
- IEC 61842 Microphones and earphones for speech communications
- IEC 61843 Measuring method for the level of intermodulation products generated in a gyromagnetic device
- IEC 61846 Ultrasonics – Pressure pulse lithotripters – Characteristics of fields
- IEC 61847 Ultrasonics – Surgical systems – Measurement and declaration of the basic output characteristics
- IEC 61850 Communication networks and systems for power utility automation
- IEC 61851 Electric vehicle conductive charging system
- IEC TR 61852 Medical electrical equipment – Digital imaging and communications in medicine (DICOM) – Radiotherapy objects
- IEC 61853 Photovoltaic (PV) module performance testing and energy rating
- IEC 61854 Overhead lines – Requirements and tests for spacers
- IEC 61855 Household electrical hair care appliances – Methods of measuring the performance
- IEC 61857 Electrical insulation systems
- IEC 61858 Electrical insulation systems – Thermal evaluation of modifications to an established electrical insulation system (EIS)
- IEC TR 61859 Guidelines for radiotherapy treatment rooms design
- IEC 61865 Overhead lines – Calculation of the electrical component of distance between live parts and obstacles – Method of calculation
- IEC 61866 Audiovisual systems – Interactive text transmission system (ITTS)
- IEC 61868 Mineral insulating oils – Determination of kinematic viscosity at very low temperatures
- IEC 61869 Instrument transformers
- IEC 61874 Nuclear instrumentation – Geophysical borehole instrumentation to determine rock density ('density logging')
- IEC 61880 Video systems (525/60) – Video and accompanied data using the vertical blanking interval – Analogue interface
- IEC 61881 Railway applications – Rolling stock equipment – Capacitors for power electronics
- IEC 61882 Hazard and operability studies (HAZOP studies) – Application guide
- IEC 61883 Consumer audio/video equipment – Digital interface
- IEC 61888 Nuclear power plants – Instrumentation important to safety – Determination and maintenance of trip setpoints
- IEC 61892 Mobile and fixed offshore units – Electrical installations
- IEC TS 61895 Ultrasonics – Pulsed Doppler diagnostic systems – Test procedures to determine performance
- IEC 61897 Overhead lines – Requirements and tests for Stockbridge type aeolian vibration dampers
- IEC TR 61901 Development tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV)
- IEC 61904 Video recording – Helical-scan digital component video cassette recording format using 12,65 mm magnetic tape and incorporating data compression (Format digital-L)
- IEC 61907 Communication network dependability engineering
- IEC TR 61908 The technology roadmap for industry data dictionary structure, utilization and implementation
- IEC 61909 Audio recording – Minidisc system
- IEC 61910 Medical electrical equipment – Radiation dose documentation
- IEC TR 61911 Live working – Guidelines for installation of distribution line conductors – Stringing equipment and accessory items (Withdrawn, replaced by IEC TR 61328:2017)
- IEC TR 61912 Low-voltage switchgear and control gear – Overcurrent protective devices
- IEC 61914 Cable cleats for electrical installations
- IEC 61915 Low-voltage switchgear and control gear – Device profiles for networked industrial devices
- IEC TR 61916 Electrical accessories – Harmonization of general rules
- IEC 61918 Industrial communication networks – Installation of communication networks in industrial premises
- IEC 61920 Infrared free air applications
- IEC 61921 Power capacitors – Low-voltage power factor correction banks
- IEC 61922 High-frequency induction heating installations – Test methods for the determination of power output of the generator
- IEC TR 61923 Household electrical appliances – Method of measuring performance – Assessment of repeatability and reproducibility
- IEC 61924 Maritime navigation and radiocommunication equipment and systems – Integrated navigation systems
- IEC 61925 Multimedia systems and equipment – Multimedia home server systems – Vocabulary of home server
- IEC 61926 Design automation
- IEC TR 61930 Fibre optic graphical symbology
- IEC TR 61931 Fibre optic – Terminology
- IEC TS 61934 Electrical insulating materials and systems – Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
- IEC 61935 Specification for the testing of balanced and coaxial information technology cabling
- IEC 61936 Power installations exceeding 1 kV a.c.
- IEC 61937 Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958
- IEC 61938 Multimedia systems – Guide to the recommended characteristics of analogue interfaces to achieve interoperability
- IEC 61943 Integrated circuits – Manufacturing line approval application guideline
- IEC TS 61944 Integrated circuits – Manufacturing line approval – Demonstration vehicles
- IEC TS 61945 Integrated circuits – Manufacturing line approval – Methodology for technology and failure analysis
- IEC TR 61946 Mineral insulating oils – Characterization of paraffinic/naphthenic nature – Low temperature differential scanning calorimetry (DSC) test method
- IEC 61947 Electronic projection – Measurement and documentation of key performance criteria
- IEC TR 61948 Nuclear medicine instrumentation – Routine tests
- IEC TS 61949 Ultrasonics – Field characterization – In situ exposure estimation in finite-amplitude ultrasonic beams
- IEC 61950 Cable management systems – Specifications for conduit fittings and accessories for cable installations for extra heavy duty electrical steel conduit
- IEC 61951 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Portable sealed rechargeable single cells
- IEC 61952 Insulators for overhead lines – Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V – Definitions, test methods and acceptance criteria
- IEC 61954 Static var compensators (SVC) – Testing of thyristor valves
- IEC TS 61956 Methods of test for the evaluation of water treeing in insulating materials
- IEC 61959 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Mechanical tests for sealed portable secondary cells and batteries
- IEC 61960 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and batteries for portable applications
- IEC 61964 Integrated circuits – Memory devices pin configurations
- IEC 61965 Mechanical safety of cathode ray tubes
- IEC 61966 Multimedia systems and equipment – Colour measurement and management
- IEC 61967 Integrated circuits – Measurement of electromagnetic emissions, 150 kHz to 1 GHz
- IEC 61968 Application integration at electric utilities – System interfaces for distribution management
- IEC 61969 Mechanical structures for electronic equipment – Outdoor enclosures
- IEC 61970 Energy management system application program interface (EMS-API)
- IEC TS 61973 High voltage direct current (HVDC) substation audible noise
- IEC 61975 High-voltage direct current (HVDC) installations – System tests
- IEC 61976 Nuclear instrumentation – Spectrometry – Characterization of the spectrum background in HPGe gamma-ray spectrometry
- IEC 61977 Fibre optic interconnecting devices and passive components – Fibre optic filters – Generic specification
- IEC 61978 Fibre optic interconnecting devices and passive components – Fibre optic passive chromatic dispersion compensators
- IEC 61980 Electric vehicle wireless power transfer (WPT) systems
- IEC 61982 Secondary batteries (except lithium) for the propulsion of electric road vehicles – Performance and endurance tests
- IEC 61984 Connectors – Safety requirements and tests
- IEC 61987 Industrial-process measurement and control – Data structures and elements in process equipment catalogues
- IEC 61988 Plasma display panels
- IEC 61991 Railway applications – Rolling stock – Protective provisions against electrical hazards
- IEC 61992 Railway applications – Fixed installations – DC switchgear
- IEC 61993 Maritime navigation and radiocommunication equipment and systems
- IEC TS 61994 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection – Glossary
- IEC 61995 Devices for the connection of luminaires for household and similar purposes
- IEC 61996 Maritime navigation and radiocommunication equipment and systems – Shipborne voyage data recorder (VDR)
- IEC TR 61997 Guidelines for the user interface in multimedia equipment for general purpose use
- IEC TR 61998 Model and framework for standardization in multimedia equipment and systems
- IEC TR 62000 Guidance for combining different single-mode fibres types
- IEC TR 62001 High-voltage direct current (HVDC) systems – Guidance to the specification and design evaluation of AC
- IEC 62002 Mobile and portable DVB-T/H radio access
- IEC 62003 Nuclear power plants – Instrumentation and control important to safety – Requirements for electromagnetic compatibility testing
- IEC 62004 Thermal-resistant aluminium alloy wire for overhead line conductor
- IEC 62005 Reliability of fibre optic interconnecting devices and passive components
- IEC 62006 Hydraulic machines – Acceptance tests of small hydroelectric installations
- IEC 62007 Semiconductor optoelectronic devices for fibre optic system applications
- IEC 62008 Performance characteristics and calibration methods for digital data acquisition systems and relevant software
- IEC TR 62010 Analyser systems – Guidance for maintenance management
- IEC 62011 Insulating materials – Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes
- IEC 62012 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments
- IEC 62014 Electronic design automation libraries
- IEC 62014-4 IP-XACT – Standard Structure for Packaging, Integrating, and Reusing IP within Tool Flows
- IEC 62014-5 Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs
- IEC 62018 Power consumption of information technology equipment – Measurement methods
- IEC 62019 Electrical accessories – Circuit-breakers and similar equipment for household use – Auxiliary contact units
- IEC 62020 Electrical accessories – Residual current monitors for household and similar uses (RCMs)
- IEC 62021 Insulating liquids – Determination of acidity
- IEC 62022 Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles
- IEC 62023 Structuring of technical information and documentation
- IEC 62024 High frequency inductive components – Electrical characteristics and measuring methods
- IEC 62025 High frequency inductive components – Non-electrical characteristics and measuring methods
- IEC 62026 Low-voltage switchgear and control gear – Controller-device interfaces (CDIs)
- IEC 62027 Preparation of object lists, including parts lists
- IEC 62028 General methods of measurement for digital television receivers
- IEC 62031 LED modules for general lighting – Safety specifications
- IEC 62032 Guide for the Application, Specification and Testing of Phase-Shifting Transformers
- IEC 62033 Attenuation uniformity in optical fibres
- IEC 62034 Automatic test systems for battery powered emergency escape lighting
- IEC 62035 Discharge lamps (excluding fluorescent lamps) – Safety specifications
- IEC 62036 Mineral insulating oils – Oxidation stability test method based on differential scanning calorimetry (DSC)
- IEC 62037 Passive RF and microwave devices, intermodulation level measurement
- IEC TR 62039 Selection guide for polymeric materials for outdoor use under HV stress
- IEC 62040 Uninterruptible power systems (UPS)
- IEC 62041 Transformers, power supplies, reactors and similar products – EMC requirements
- IEC 62044 Cores made of soft magnetic materials – Measuring methods
- IEC TS 62045 Multimedia security – Guideline for privacy protection of equipment and systems in and out of use
- IEC TS 62046 Safety of machinery – Application of protective equipment to detect the presence of persons
- IEC 62047 Semiconductor devices – Micro-electromechanical devices
- IEC TR 62048 Optical fibres – Reliability – Power law theory
- IEC TR 62051 Electricity metering – Data exchange for meter reading, tariff and load control – Glossary of terms
- IEC 62052 Electricity metering equipment (a.c.) – General requirements, tests and test conditions
- IEC 62053 Electricity metering equipment (a.c.) – Particular requirements
- IEC 62054 Electricity metering (a.c.) – Tariff and load control
- IEC 62055 Electricity metering – Payment systems
- IEC 62056 Electricity metering data exchange – The DLMS/COSEM suite
- IEC 62058 Electricity metering equipment (AC) – Acceptance inspection
- IEC 62059 Electricity metering equipment – Dependability
- IEC 62060 Secondary cells and batteries – Monitoring of lead acid stationary batteries – User guide
- IEC 62061 Safety of machinery: Functional safety of electrical, electronic and programmable electronic control systems
- IEC TR 62063 High-voltage switchgear and control gear – The use of electronic and associated technologies in auxiliary equipment of switchgear and control gear
- IEC 62065 Maritime navigation and radiocommunication equipment and systems – Track control systems – Operational and performance requirements, methods of testing and required test results
- IEC TR 62066 Surge overvoltages and surge protection in low-voltage a.c. power systems – General basic information
- IEC 62067 Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) – Test methods and requirements
- IEC 62068 Electrical insulating materials and systems – General method of evaluation of electrical endurance under repetitive voltage impulses
- IEC 62070 Broadcast digital video tape recorders – Identification method for recording and/or reproduction error status
- IEC 62071 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape – Format D-7
- IEC TS 62073 Guidance on the measurement of hydrophobicity of insulator surfaces
- IEC 62074 Fibre optic interconnecting devices and passive components – Fibre optic WDM devices
- IEC 62075 Audio/video, information and communication technology equipment – Environmentally conscious design
- IEC 62076 Industrial electroheating installations – Test methods for induction channel and induction crucible furnaces
- IEC 62077 Fibre optic interconnecting devices and passive components – Fibre optic circulators – Generic specification
- IEC 62080 Sound signalling devices for household and similar purposes
- IEC 62083 Medical electrical equipment – Requirements for the safety of radiotherapy treatment planning systems
- IEC 62087 Audio, video, and related equipment – Determination of power consumption
- IEC 62088 Nuclear instrumentation – Photodiodes for scintillation detectors – Test procedures
- IEC 62089 Nuclear instrumentation – Calibration and usage of alpha/beta gas proportional counters
- IEC 62090 Product package labels for electronic components using bar code and two-dimensional symbologies
- IEC 62091 Low-voltage switchgear and control gear – Controllers for drivers of stationary fire pumps
- IEC 62093 Balance-of-system components for photovoltaic systems – Design qualification natural environments
- IEC 62094 Indicator light units for household and similar fixed-electrical installations
- IEC TR 62095 Electric cables – Calculations for current ratings – Finite element method
- IEC TR 62096 Nuclear power plants – Instrumentation and control important to safety – Guidance for the decision on modernization
- IEC 62097 Hydraulic machines, radial and axial – Performance conversion method from model to prototype
- IEC TS 62098 Evaluation methods for microprocessor- based instruments
- IEC 62099 Fibre optic wavelength switches – Generic specification
- IEC TS 62100 Cables for aeronautical ground lighting primary circuits
- IEC TS 62101 Electrical insulation systems – Short-time evaluation of combined thermal and electrical stresses
- IEC TS 62102 Electrical safety – Classification of interfaces for equipment to be connected to information and communications technology networks
- IEC 62104 Characteristics of DAB receivers
- IEC 62105 Digital audio broadcast system – Specification of the receiver data interface (RDI)
- IEC 62106 Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz
- IEC 62107 Super video compact disc – Disc-interchange system-specification
- IEC 62108 Concentrator photovoltaic (CPV) modules and assemblies – Design qualification and type approval
- IEC 62109 Safety of power converters for use in photovoltaic power systems
- IEC 62110 Electric and magnetic field levels generated by AC power systems – Measurement procedures with regard to public exposure
- IEC 62115 Electric toys – Safety
- IEC 62116 Utility-interconnected photovoltaic inverters – Test procedure of islanding prevention measures
- IEC 62117 Nuclear reactor instrumentation – Pressurized light water reactors (PWR) – Monitoring adequate cooling within the core during cold shutdown
- IEC 62121 Methods of measurement for minidisc recorders/players
- IEC 62122 Methods of measurement for consumer-use digital VTRs – Electronic and mechanical performances
- IEC 62124 Photovoltaic (PV) stand alone systems – Design verification
- IEC TR 62125 Environmental statement specific to IEC TC 20 – Electric cables
- IEC 62127 Ultrasonics – Hydrophones
- IEC 62128 Railway applications – Fixed installations – Electrical safety, earthing and the return circuit
- IEC 62129 Calibration of wavelength/optical frequency measurement instruments
- IEC TR 62130 Climatic field data including validation
- IEC TR 62131 Environmental conditions – Vibration and shock of electrotechnical equipment
- IEC 62132 Integrated circuits – Measurement of electromagnetic immunity
- IEC 62133 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
- IEC 62134 Fibre optic interconnecting devices and passive components – Fibre optic closures
- IEC 62135 Resistance welding equipment
- IEC 62137 Surface mounting technology – Environmental and endurance test methods for surface mount solder joint
- IEC 62138 Nuclear power plants – Instrumentation and control important for safety – Software aspects for computer-based systems performing category B or C functions
- IEC 62141 Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression – Type D-16 format
- IEC TS 62143 Electrical installations for lighting and beaconing of aerodromes – Aeronautical ground lighting systems – Guidelines for the development of a safety lifecycle methodology
- IEC 62146 Grading capacitors for high-voltage alternating current circuit-breakers
- IEC 62148 Fibre optic active components and devices – Package and interface standards
- IEC 62149 Fibre optic active components and devices – Performance standards
- IEC 62150 Fibre optic active components and devices – Test and measurement procedures
- IEC 62151 Safety of equipment electrically connected to a telecommunication network
- IEC TR 62152 Transmission properties of cascaded two-ports or quadripols – Background of terms and definitions
- IEC 62153 Metallic communication cables test methods
- IEC 62155 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
- IEC 62156 Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (Digital S)
- IEC TR 62157 Cylindrical machined carbon electrodes – Nominal dimensions
- IEC PAS 62162 Field-induced charged-device model test method for electrostatic discharge withstand thresholds of microelectronic components
- IEC TR 62188 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Design and manufacturing recommendations for portable batteries made from sealed secondary cells
- IEC 62192 Live working – Insulating ropes
- IEC 62193 Live working – Telescopic sticks and telescopic measuring sticks
- IEC 62194 Method of evaluating the thermal performance of enclosures
- IEC 62196 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles
- IEC 62197 Connectors for electronic equipment – Quality assessment requirements
- IEC 62198 Managing risk in projects – Application guidelines
- IEC 62208 Empty enclosures for low-voltage switchgear and control gear assemblies – General requirements
- IEC 62209 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures
- IEC 62211 Inductive components – Reliability management
- IEC 62215 Integrated circuits – Measurement of impulse immunity
- IEC 62216 Digital terrestrial television receivers for the DVB-T system
- IEC 62217 Polymeric HV insulators for indoor and outdoor use – General definitions, test methods and acceptance criteria
- IEC 62219 Overhead electrical conductors – Formed wire, concentric lay, stranded conductors
- IEC 62220 Medical electrical equipment – Characteristics of digital X-ray imaging devices
- IEC TR 62221 Optical fibres – Measurement methods – Microbending sensitivity
- IEC TR 62222 Fire performance of communication cables installed in buildings
- IEC 62223 Insulators – Glossary of terms and definitions
- IEC TS 62224 Multimedia home server systems – Conceptual model for digital rights management
- IEC 62226 Exposure to electric or magnetic fields in the low and intermediate frequency range – Methods for calculating the current density and internal electric field induced in the human body
- IEC 62227 Multimedia home server systems – Digital rights permission code
- IEC 62228 Integrated circuits – EMC evaluation of transceivers
- IEC TS 62229 Multimedia systems and equipment – Multimedia e-publishing and e-book – Conceptual model for multimedia e-publishing
- IEC 62230 Electric cables – Spark-test method
- IEC 62231 Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV
- IEC 62232 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
- IEC 62233 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
- IEC TR 62235 Nuclear facilities – Instrumentation and control systems important to safety – Systems of interim storage and final repository of nuclear fuel and waste
- IEC 62236 Railway applications – Electromagnetic compatibility
- IEC 62237 Live working – Insulating hoses with fittings for use with hydraulic tools and equipment
- IEC 62238 Maritime navigation and radiocommunication equipment and systems – VHF radiotelephone equipment incorporating Class "D" Digital Selective Calling (DSC) – Methods of testing and required test results
- IEC TS 62239 Process management for avionics – Management plan
- IEC TR 62240 Process management for avionics – Electronic components capability in operation
- IEC 62241 Nuclear power plants – Main control room – Alarm functions and presentation
- IEC 62243 Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE)
- IEC 62244 Radiation protection instrumentation – Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders
- IEC 62246 Reed switches
- IEC TR 62251 Multimedia systems and equipment – Quality assessment – Audio-video communication systems
- IEC 62253 Photovoltaic pumping systems – Design qualification and performance measurements
- IEC 62255 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables
- IEC 62256 Hydraulic turbines, storage pumps and pump-turbines – Rehabilitation and performance improvement
- IEC TS 62257 Recommendations for renewable energy and hybrid systems for rural electrification
- IEC 62258 Semiconductor die products
- IEC 62259 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Nickel-cadmium prismatic secondary single cells with partial gas recombination
- IEC 62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
- IEC TR 62263 Live working – Guidelines for the installation and maintenance of optical fibre cables on overhead power lines
- IEC 62264 Enterprise-control system integration
- IEC 62265 Advanced Library Format (ALF) describing Integrated Circuit (IC) technology, cells and blocks (Withdrawn)
- IEC 62267 Railway applications – Automated urban guided transport (AUGT) – Safety requirements
- IEC 62270 Guide for computer-based control for hydroelectric power plant automation
- IEC 62271 High-voltage switchgear and control gear
- IEC 62272 Digital radio mondiale (DRM)
- IEC 62273 Methods of measurement for radio transmitters
- IEC 62274 Medical electrical equipment – Safety of radiotherapy record and verify systems
- IEC 62275 Cable management systems – Cable ties for electrical installations
- IEC 62276 Single crystal wafers for surface acoustic wave (SAW) device applications – Specifications and measuring methods
- IEC 62278 Railway applications – Specification and demonstration of reliability, availability, maintainability and safety (RAMS)
- IEC 62279 Railway applications – Communication, signalling and processing systems – Software for railway control and protection systems
- IEC 62280 Railway applications – Communication, signalling and processing systems – Safety related communication in transmission systems
- IEC 62281 Safety of primary and secondary lithium cells and batteries during transport
- IEC 62282 Fuel cell technologies
- IEC TR 62283 Optical fibres – Guidance for nuclear radiation tests
- IEC TR 62284 Effective area measurements of single-mode optical fibres – Guidance
- IEC TR 62285 Application guide for non-linear coefficient measuring methods
- IEC 62286 Service diagnostic interface for consumer electronics products and networks – Implementation for IEEE 1394
- IEC 62287 Maritime navigation and radiocommunication equipment and systems – Class B shipborne equipment of the automatic identification system (AIS)
- IEC 62288 Maritime navigation and radiocommunication equipment and systems – Presentation of navigation-related information on shipborne navigational displays – General requirements, methods of testing and required test results
- IEC 62289 Video recording – Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 Compression – Format D-10
- IEC 62290 Railway applications – Urban guided transport management and command/control systems
- IEC TR 62291 Multimedia data storage – Application program interface for UDF based file systems
- IEC 62295 Multimedia systems – Common communication protocol for inter-connectivity on heterogeneous networks
- IEC TR 62296 Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements
- IEC 62297 Triggering messages for broadcast applications
- IEC 62298 Teleweb application
- IEC 62300 Consumer audio/video equipment digital interface with plastic optical fibre
- IEC 62301 Household electrical appliances – Measurement of standby power
- IEC 62304 Medical Device Software – Software Life Cycle Processes
- IEC 62305 Protection Against Lightning
- IEC 62310 Static Transfer Systems (STS)
- IEC 62325 Standards related to energy market models & communications
- IEC TR 62331 Pulsed field magnetometry
- IEC 62351 Power System Control and Associated Communications – Data and Communication Security
- IEC 62353 Medical electrical equipment – Recurrent test and test after repair of medical electrical equipment
- IEC/TR 62357 Power system control and associated communications – Reference architecture for object models, services and protocols
- IEC 62365 Digital audio – Digital input-output interfacing – Transmission of digital audio over asynchronous transfer mode (ATM) networks
- IEC 62366 Medical devices – Application of usability engineering to medical devices
- IEC 62368 Audio/video, information and communication technology equipment
- IEC 62379 Common control interface for networked digital audio and video products
- IEC 62384 DC or AC supplied electronic control gear for LED modules – Performance requirements
- IEC 62386 Digital addressable lighting interface
- IEC 62388 Maritime Navigation and Radio Communications, Shipborne Radar
- IEC 62395 Electrical resistance trace heating systems for industrial and commercial applications
- IEC 62420 Concentric lay stranded overhead electrical conductors containing one or more gap(s)
- IEC 62425 Railway applications - Communication, signalling and processing systems - Safety related electronic systems for signalling
- IEC 62439 Industrial communication networks – High availability automation networks
- IEC 62443 Industrial communication networks – Network and system security
- IEC 62446 Grid connected photovoltaic systems – Minimum requirements for system documentation, commissioning tests and inspection
- IEC 62455 Internet protocol (IP) and transport stream (TS) based service access
- IEC 62464 Magnetic resonance equipment for medical imaging
- IEC 62471 Photobiological safety of lamps and lamp systems
- IEC 62474 Material declaration for products of and for the electrotechnical industry
- IEC 62481 Digital Living Network Alliance (DLNA) home networked device interoperability guidelines
- IEC 62491 Industrial systems, installations and equipment and industrial products – Labelling of cables and cores
- IEC 62493 Assessment of lighting equipment related to human exposure to electromagnetic fields
- IEC 62502 Analysis techniques for dependability – Event tree analysis (ETA)
- IEC 62504 General lighting – Light emitting diode (LED) products and related equipment – Terms and definitions
- IEC 62505 Railway applications – Fixed installations – Particular requirements for a.c. switchgear
- IEC 62507 Identification systems enabling unambiguous information interchange – Requirements
- IEC 62531 Property Specification Language (PSL)
- IEC TS 62556 Ultrasonics – Field characterization – Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems
- IEC 62560 Self-ballasted LED-lamps for general lighting services by voltage > 50 V – Safety specifications
- IEC 62561 Lightning protection system components (LPSC)
- IEC 62605 Multimedia systems and equipment – Multimedia e-publishing and e-books – Interchange format for e-dictionaries
- IEC 62606 General requirements for arc fault detection devices
- IEC 62612 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V – Performance requirements
- IEC 62680 Universal Serial Bus (USB) interfaces for data and power
- IEC 62682 Management of alarm systems for the process industries
- IEC 62684 Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
- IEC/TR 62685 Industrial communication networks – Profiles – Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs)
- IEC 62693 Industrial electroheating installations – Test methods for infrared electroheating installations
- IEC 62700 DC Power supply for notebook computer
- IEC 62703 Expression of performance of fluorometric oxygen analyzers in liquid media
- IEC 62708 Documents kinds for electrical and instrumentation projects in the process industry
- IEC 62717 LED modules for general lighting – Performance requirements
- IEC 62734 Industrial networks – Wireless communication network and communication profiles – ISA 100.11a
- IEC 62752 In-cable control and protection device for mode 2 charging of electric roadvehicles
- IEC 62769 Field device integration (FDI)
- IEC 62776 Double-capped LED lamps designed to retrofit linear fluorescent lamps – Safety specifications
- IEC/TR 62794 Industrial-process measurement, control and automation – Reference model for representation of production facilities (digital factory)
- IEC/TR 62795 Interoperation guide of field device tool (FDT) / device type manager (DTM) and electronic device description language (EDDL)
- IEC/TS 62796 Energy efficiency in electroheating installations
- IEC 62798 Industrial electroheating equipment – Test methods for infrared emitters
- IEC/TR 62837 Energy efficiency through automation systems
- IEC 62840 Electric vehicle battery swap system
- IEC 62881 Cause and Effect Matrix
- IEC 62885 Dry vacuum cleaners for household or similar use – Methods for measuring the performance
- IEC/TS 62872 Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
- IEC/TR 62914 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Experimental procedure for the forced internal short-circuit test of IEC 62133:2012
- IEC/PAS 62948 Industrial networks – Wireless communication network and communication profiles – WIA-FA
- IEC/PAS 62953 Industrial communication networks – Fieldbus specifications – ADS-net
- IEC 63110 Protocol for the management of electric vehicles charging and discharging infrastructures
- IEC 63119 Protocol for information exchange for electric vehicle charging roaming services
- IEC 63382 Protocol for the management of distributed energy storage systems based on electric vehicles
- IEC/TS 63383 Cybersecurity aspects of devices used for power metering and monitoring, power quality monitoring, data collection and analysis
- IEC/TS 63384 Power System Stability Control
- IEC/TR 63385 Transmitting and receiving equipment for radiocommunication
- IEC/PAS 63386 CONDUCTIVE CHARGING OF ELECTRIC VEHICLE
- IEC 63387 Hybrid CPV/PV modules
- IEC/TS 63389 Developing a profile composed of a set of Basic Application Profiles (BAPs) of IEC 61850 for DER compliant to IEEE 1547
- IEC/TS 63390 Technical Specifications for Digitalization of Operation and Maintenance in Hydropower Assets
- IEC 63391 General technical requirements for millimeter wave holographic imaging body scanner
- IEC/TS 63392 Fire test for concentrator PV modules
- IEC/TR 63393 Electrical systems for electric road vehicles and electric industrial trucks
- IEC/TS 63394 Safety of machinery – Guidelines on functional safety of safety-related control system
- IEC 63395 Sustainable management of waste electrical and electronic equipment (e-waste).
- IEC/TS 63397 Guidelines for qualifying PV modules for increased hail resistance
- IEC/TS 63398 Technical Specification for Black Start of Hydropower Plant
- IEC 63399 Household and similar use electrical rice cookers - Methods for measuring the performance
- IEC/TR 63401 Dynamic characteristics of inverter-based resources in bulk power systems
- IEC 63402 Energy Efficiency Systems - Smart Grid - Customer Energy Management Systems - General Requirements and Architecture
- IEC 63403 LED packages for horticultural lighting
- IEC 63404 Switchgear and controlgear and their assemblies for low voltage – Integration method of radiocommunication device into an equipment
- IEC 63405 High-voltage test techniques - Dielectric loss measurements "PROPOSED HORIZONTAL STANDARD"
- IEC/TS 63406 Generic RMS simulation models of converter-based generating units for power system dynamic analysis
- IEC 63407 Conductive charging of electric vehicles - Contact interface for automated connection device (ACD)
- IEC/SRD 63408 Safety Aspects – Guideline for Adult AAL Care Recipients in standards and other specifications
- IEC 63409 Photovoltaic power generating systems connection with grid
- IEC/TR 63410 Decentralized electrical energy systems roadmap
- IEC/TR 63411 Grid Connection of Offshore Wind via VSC-HVDC System
- IEC 63412 Ultrasonics - Shear-wave elastography
- IEC 63413 Nuclear Power Plants - Instrumentation and control systems important to safety - Platform qualification
- IEC/TS 63414 Artificial pollution tests on high-voltage insulators made of hydrophobicity transfer materials to be used on a.c. and d.c. systems
- IEC/TR 63415 Nuclear Power plants – Instrumentation and control systems – Use of formal security models for I&C security architecture design and assessment
- IEC/SRD 63416 Ethical considerations of AI when Applied in the Active Assisted Living (AAL) context
- IEC/TS 63417 Guide and plan to develop a unified IEC Smart energy Ontology
- IEC 63418 Fixed accessories intended for household and similar purposes that supply power through an interface
- IEC 63419 Guideline for Switching Reliability Evaluation procedures for Gallium Nitride Power Conversion Devices
- IEC/SRD 63420 Cooperative Multiple Systems in Connected Home Environments – AAL SOTIF of E/E Systems
- IEC 63423 Nuclear Power Plants - Instrumentation and control systems important to safety - Cable assemblies for Harsh Environment Purposes
- IEC/TR 63424 Validation of dynamic power control and exposure time-averaging algorithms
- IEC/TR 63425 Connectivity for Lighting Systems
- IEC 80000 Quantities and units
- IEC 80001 Application of risk management for IT-networks incorporating medical devices
- IEC/TR 80002 Medical device software
- IEC/TS 80004 Nanotechnologies
- IEC/IEEE 80005 Utility connections in port
- IEC 80369 Small-bore connectors for liquids and gases in healthcare applications
- IEC 80416 Basic principles for graphical symbols for use on equipment
- IEC 80601 Medical electrical equipment
- IEC 81346 Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations
- IEC 81714 Design of graphical symbols for use in the technical documentation of products
- IEC 82045 Document management
- IEC 82079 Preparation of instructions for use – Structuring, content and presentation
- IEC 82304 Health software
- IEC 88528 Reciprocating internal combustion engine driven alternating current generating sets
See also
- Category:IEC standards
- List of IEC technical committees
- List of ISO standards – covers also standards jointly published by the International Organization for Standardization and the IEC
References
- IEC 61334-5-1, preface.
External links
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.