ITOS-B

NOAA-1 was a weather satellite operated by the National Oceanic and Atmospheric Administration (NOAA). It was part of a series of satellites called ITOS, or improved TIROS.[3] ITOS-B was released on October 21, 1971, from the Vandenberg Air Force Base, California, with a Delta rocket. It failed to achieve a successful earth orbit. A malfunction in the second stage launch vehicle caused the spacecraft to reenter the earth's atmosphere about 1 hour after lift-off.

ITOS-B
Delta rocket with ITOS-B.
Mission typeWeather
OperatorNOAA[1]
COSPAR ID1971-091A
Mission durationLaunch failure
Spacecraft properties
ManufacturerRCA Astro
Launch mass687 kilograms (1,515 lb)
Start of mission
Launch dateOctober 21, 1971, 00:00 (1971-10-21Z) UTC[2]
RocketDelta-N6
Launch siteVandenberg SLC-2E
Orbital parameters
Reference systemGeocentric
RegimeSun-synchronous
EpochPlanned
ITOS
 

ITOS-B was designed to provide improved operational infrared and visual observations of earth cloud cover for use in weather analysis and forecasting. Secondary objectives included obtaining both solar proton and global heat balance data on a daily basis. To accomplish these tasks, the sun-synchronous spacecraft carried four cameras - 2 television cameras for automatic picture transmissions (APT) and two advanced vidicon camera system (AVCS) cameras. It also carried a low-resolution flat plate radiometer, a solar proton monitor, and two scanning radiometers that not only could measure emitted IR radiation but could also serve as a backup system for the APT and AVCS cameras.

The nearly cubical spacecraft measured 1 by 1 by 1.2 meters (3.3 ft × 3.3 ft × 3.9 ft). The TV cameras and infrared sensors were mounted on the satellite baseplate with their optical axes directed vertically earthward. The satellite was equipped with three curved solar panels that were folded during launch and were to be deployed after orbit was achieved. Each panel measured over 4.2 meters (14 ft) in length when unfolded and was covered with 3420 solar cells, each 2 centimeters (0.79 in) by 2 centimeters (0.79 in). A dynamics and attitude control system was designed to maintain desired spacecraft orientation through gyroscopic principles incorporated into the satellite design. Earth orientation was to be maintained by taking advantage of the precession induced from a momentum flywheel so that the satellite body precession rate of one revolution per orbit would provide the desired 'earth looking' attitude. Minor adjustments in attitude and orientation could be made by means of magnetic coils and by varying the speed of the momentum flywheel.[1]

References
  1. "NASA/NSSDC ITOS-B spacecraft details". Retrieved June 7, 2018. Public Domain This article incorporates text from this source, which is in the public domain.
  2. McDowell, Jonathan. "Launch Log". Jonathan's Space Page. Retrieved June 6, 2018.
  3. Wade, Mark. "ITOS". Encyclopedia Astronautica. Archived from the original on June 21, 2002. Retrieved June 7, 2018.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.