Innogy Nordsee 1

Innogy Nordsee 1-2-3 is a proposal for a large wind farm complex off Germany's coast. The planned offshore installation is to be built 40 kilometres (25 mi) north of the island of Juist, within an area of around 100 square kilometres (39 sq mi) and in water 26–34 metres (85–112 ft) deep. The project includes three wind farms: Innogy Nordsee 1 with 54 turbines, Innogy Nordsee 2 with 48 turbines, and Innogy Nordsee 3 with 60 turbines. In total, 162 wind turbines with a capacity of 6.15 megawatts (MW) will be used.

Innogy Nordsee 1-2-3
CountryGermany
LocationNorth Sea
Coordinates53.979°N 6.814°E / 53.979; 6.814
StatusCommissioned (Innogy Nordsee 1)
Commission date2017 (Innogy Nordsee 1)
Construction cost€2.8 billion
Owner(s)Innogy
Wind farm
TypeOffshore
Max. water depth26–34 m (85–112 ft)
Distance from shore40 km (25 mi)
Hub height100 m (328 ft)
Rotor diameter126 m (413 ft)
Site area100 km2 (39 sq mi)
Power generation
Units operational54 X 6.15 MW
Make and modelREpower 6M
Nameplate capacity996 MW
Innogy Nordsee 1-2-3's location in the wind farms of the German Bight

The Innogy Nordsee 1 project was originally developed by ENOVA. In 2008, it was acquired by RWE Innogy.[1] The construction permit for Innogy Nordsee 1 was issued on 4 April 2012.[2] In December of 2017 Nordsee 1 began commercial operation, It is located 45 km from the shore.[3]

See also

References
  1. RWE Innogy Acquires Rights To Build 960-MW Offshore Wind Farm, January 28, 2009
  2. Germany: RWE Receives Permit for Innogy Nordsee 1 Offshore Wind Farm, April 4, 2012
  3. "Nordsee One - Offshore Wind Farm in the North Sea". www.nordseeone.com. Retrieved 2022-09-18.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.