Whitewash

Additives traditionally used include water glass, glue, egg white, Portland cement, salt, soap, milk, flour, molasses, alum, and soil.

Whitewash is sometimes coloured with earths to achieve colours spanning the range of broken white, cream, yellow and a range of browns.

The blue laundry dye (such as Reckitt's "Dolly Blue" in the UK, Ireland and Australia, Loulaki in Greece, or Mrs. Stewart's Bluing in North America), formerly widely used to give a bright tinge to boiled white textiles, was a common 19th century addition.

Historically, pig's blood was added to give the colour Suffolk pink, a colour still widely used on house exteriors in some areas of the UK. If animal blood is applied excessively, its iron oxide can compromise the lime binder's strength.

Pozzolanic materials are occasionally added to give a much harder wearing paint finish. This addition creates a short open time and therefore requires timely application of the altered paint.

Linseed oil is sometimes added (typically 0.5-2%) to improve adhesion on difficult surfaces.

Cement addition makes a harder wearing paint in white or grey. Open time is short, so this is added at point of use. Cement restricts the breathable aspects of the limewash and is inadvisable for preserved historic buildings.

Dilute glues improve paint toughness.

Wheat flour has been used as a strength enhancing binder. Salt is often added to prevent mold.

Basic limewash can be inadequate in its ability to prevent rain-driven water ingress. Additives are being developed but these have the potential for affecting free vapor permeability. For this reason silicate paints, more common in Germany, are gaining popularity in the UK over limewash.

White-painted trees in Turkey

Whitewash is applied to trees, especially fruit trees, to prevent sun scald.[3] Most often only the lower trunk is painted. In Poland painting the whole trunk is also said to help keep the body of the tree cool in late winter and early spring months and hence help prevent fruit trees from blooming too soon, i.e. when warm sunny days could promote rapid tree warming, rising sap and bloom and intermittent frosty nights could damage outer tree rings and destroy the young buds and blossoms.

A whitewashed langhuis (long cottage) in rural Verloren Vlei, Western Cape region of South Africa

In the middle of the 20th century, when family farms with dairy barns were common in the Upper Midwest of the United States, whitewash was a necessary part of routine barn maintenance.

A traditional animal barn contains a variety of extremely rough surfaces that are difficult to wash and keep clean, such as stone and brick masonry, and also rough-cut lumber for the ceiling. If left alone, these surfaces collect dust, dirt, insect debris and wastes, and can become very dirty.

Whitewash aids in sanitation by coating and smoothing over the rough surfaces. Successive applications of whitewash build up layers of scale that flake off and, in the process, remove surface debris. The coating also has antimicrobial properties that provide hygienic and sanitary benefits for animal barns.[4]

Whitewash was painted on the internal walls of Royal Navy vessels during the Age of Sail to improve light levels inside a vessel's gundeck, reduce bacteria and prevent wear and tear on hull timbers.[5] It was also used during the Second World War by the German armed forces as an easy-to-apply winter camouflage for soft- and hard-skinned vehicles, aircraft and helmets.[6]