LNWR Precursor Tank Class

The London and North Western Railway (LNWR) "Precursor Tank" Class was a type of 4-4-2 tank steam locomotive.[2] Fifty were built to the design of George Whale between May 1906 and April 1909, being a tank engine version of his "Precursor" Class.[3]

LNWR Precursor Tank
No. 528 in photographic grey livery
Type and origin
Power typeSteam
DesignerGeorge Whale
Serial number4560–4599,
4820–4829
Build date1906–1909
Total produced50
Specifications
Configuration:
  Whyte4-4-2T
  UIC2′B1 2t
Gauge4 ft 8+12 in (1,435 mm)
Leading dia.First 30: 3 ft 9 in (1.143 m)
Last 20: 3 ft 3 in (0.991 m)
Driver dia.6 ft 3 in (1.905 m)
Trailing dia.First 30: 3 ft 9 in (1.143 m)
Last 20: 3 ft 3 in (0.991 m)
Loco weight74 long tons 15 cwt (167,400 lb or 75.9 t)
Boiler pressure175 psi (1.21 MPa)
Heating surface1,939 sq ft (180.1 m2)[1]
CylindersTwo, inside
Cylinder size19 in × 26 in (483 mm × 660 mm)[1]
Valve gearJoy
Performance figures
Tractive effort15,216 lbf (67.68 kN)
Career
OperatorsLNWR » LMS
Power classLMS: 2P
Withdrawn1927–1940
DispositionAll scrapped

Chronologically, the class was constructed three distinct blocks, from May to September 1906 (works nos. 4560–4589), March to April 1907 (4590–4599), and March to April 1909 (4820–4829). The first 30 locomotives had 3 ft 9 in (1.143 m) carrying wheels, but the size of these was reduced to 3 ft 3 in (0.991 m) thereafter.[3]

The LNWR reused numbers from withdrawn locomotives, so the numbering system was completely haphazard. The 3 ft 9 in engines were numbered by 528, 531, 784, 1295, 1305, 1981–1985, 97, 111, 181, 196, 562, 616, 803, 1356, 1508, 2210, 139, 653, 834, 874, 1506, 1572, 1589, 1671, 1714, and 2165. The 3 ft 3 in engines were numbered 44, 527, 612, 762, 827, 875, 1427, 1764, 2196, 2446, 920, 935, 1164, 1219, 1523, 1536, 1551, 2077, 2223 and 2228.

All fifty passed into LMS ownership in 1923. The LMS gave them the power classification 2P. The LMS also renumbered them into solid block of numbers: 6780–6809 for the 3 ft 9 in engines and 6810–6829 for the 3 ft 3 in engines, in the order given above.

Due to their weight, the Precursor Tanks were unable to operate on some branch lines, but had primarily been designed for use on heavy suburban trains.[4][5] Initially, they were put to work on local services between Sutton Coldfield and Birmingham, and also between Watford and London Euston.[6] In 1921, they were reported as being employed on the latter to the near-total exclusion of other locomotive types, as well as on other routes.[5] 1572, which was possibly one of the earliest locomotives to have the initials "L&NWR" on its sides replaced by "LMS", was noted to be working on the Morecambe branch in 1923.[7]

One member of the class was withdrawn in October 1927, and the others between December 1931 and February 1940.[3] None were preserved.

References

  1. LNWR (December 1908). Wages and Hours Arbitration. London: London and North Western Railway. p. 334 via HathiTrust.
  2. "Passenger Tank Engines. No. V". The Engineer. Vol. 110. 23 September 1910. pp. 336–337 via Internet Archive.
  3. Baxter, Bertram (1979). Baxter, David (ed.). British Locomotive Catalogue 1825–1923, Volume 2B: London and North Western Railway and its constituent companies. Ashbourne: Moorland Publishing Company. pp. 264–265. ISBN 0903485842.
  4. Montagu, George (1907). Ten Years of Locomotive Progress. London: Alston Rivers Ltd. p. 137 via HathiTrust.
  5. "The "Precursor Tank" Locomotives of the London and North-western Railway". The Locomotive News and Railway Notes. Vol. 10, no. 67. 10 December 1921. pp. 137–138 via HathiTrust.
  6. LNWR (1908), p. 32.
  7. Stones, H. R. (1923). "[untitled]". The Railway Magazine. Vol. 52, no. 311. p. 428 via HathiTrust.

Sources

  • Casserley, H. C. & Johnston, Stuart W. (1974) [1966]. Locomotives at the Grouping 3: London, Midland and Scottish Railway. Shepperton, Surrey: Ian Allan. p. 77. ISBN 0-7110-0554-0.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.