Lancer 30 Mark V
The Lancer 30 Mark V, also called the Lancer 30 -5, is an American sailboat that was designed by C&C Design as a cruiser and first built in 1980.[1][2][3]
Development | |
---|---|
Designer | C&C Design |
Location | United States |
Year | 1980 |
Builder(s) | Lancer Yachts |
Role | Cruiser |
Name | Lancer 30 Mark V |
Boat | |
Displacement | 8,200 lb (3,719 kg) |
Draft | 5.20 ft (1.58 m) |
Hull | |
Type | monohull |
Construction | fiberglass |
LOA | 29.50 ft (8.99 m) |
LWL | 24.00 ft (7.32 m) |
Beam | 10.00 ft (3.05 m) |
Engine type | inboard motor |
Hull appendages | |
Keel/board type | fin keel |
Ballast | 3,000 lb (1,361 kg) |
Rudder(s) | internally-mounted spade-type rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 34.00 ft (10.36 m) |
J foretriangle base | 10.80 ft (3.29 m) |
P mainsail luff | 35.50 ft (10.82 m) |
E mainsail foot | 13.00 ft (3.96 m) |
Sails | |
Sailplan | fractional rigged sloop |
Mainsail area | 230.75 sq ft (21.437 m2) |
Jib/genoa area | 183.60 sq ft (17.057 m2) |
Total sail area | 414.35 sq ft (38.494 m2) |
The Lancer 30 Mark V is a development of the Lancer 30 Mark IV, which traces its origins to the C&C 30 molds.[1][3]
Production
The design was built by Lancer Yachts in the United States, between 1980 and 1985, but it is now out of production.[1][3][4]
Design
The Lancer 30 Mark V is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a raked stem; a raised counter, reverse transom; an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel. It displaces 8,200 lb (3,719 kg) and carries 3,000 lb (1,361 kg) of ballast.[1][3]
The boat has a draft of 5.20 ft (1.58 m) with the standard keel.[1][3]
The boat is fitted with an inboard engine for docking and maneuvering. The fuel tank holds 24 U.S. gallons (91 L; 20 imp gal) and the fresh water tank also has a capacity of 24 U.S. gallons (91 L; 20 imp gal).[1][3]
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin with a drop leaf table and an aft cabin with a double berth on the port side. The galley is located on the starboard side amidships. The galley is an open "L"-shape and is equipped with a two-burner stove and a double sink. The head is located on the starboard side at the companionway steps.[1][3]
The design has a hull speed of 6.57 kn (12.17 km/h).[3]
See also
References
- McArthur, Bruce (2020). "Lancer 30-5 sailboat". sailboatdata.com. Archived from the original on 9 July 2021. Retrieved 10 July 2021.
- McArthur, Bruce (2020). "C&C Design 1961 - 2017". sailboatdata.com. Archived from the original on 1 March 2021. Retrieved 9 July 2021.
- Sea Time Tech, LLC (2022). "Lancer 30-5". sailboat.guide. Archived from the original on 18 April 2022. Retrieved 18 April 2022.
- McArthur, Bruce (2021). "Lancer Yacht Corp. (USA) 1974 - 1986". sailboatdata.com. Archived from the original on 20 June 2021. Retrieved 10 July 2021.