Londonderry & Coleraine Railway

Despite being a relatively short line it required some considerable engineering works. The route starting from the Derry terminus on the east bank of the River Foyle. The line followed the river north and from where it flows into Lough Foyle the line follows south and east banks via Magilligan and Bellarena.[1] At Magiligan an embankment was built for the railway line and about 22000 acres reclaimed from Lough Foyle and the sea. Of the 22000 acres 12000 was set aside to cover the costs of the railway.[2] The major engineering feature on the line is the two Downhill tunnels. Construction of which began in June 1846. The blasting of the tunnels the longest of which is at 275 metres long the longest in Ireland attracted a crowd of up to 12,000. The blasting of the tunnels took 3600 lbs of gunpowder.[3] When the tunnel was complete a banquet for 500 people was held in the tunnel, the event became known locally as the Great Blast.[4]

a postcard showing the tunnel at Downhill from around 1905

In 1852 the first sections of the railway between Londonderry and Limavady were ready for use. The Board of Trade authorised the opening of the line to goods traffic in October but were initially reluctant to authorise passenger traffic. Eventually authorisation was given by the end of December that year. Work on the line continued towards Coleraine from Broharris Junction four miles from Limavady.[5]

From the mouth of Lough Foyle the line went east before following the River Bann into Coleraine. Initially the line terminated on the west bank of the Bann. In 1855 the Ballymena, Ballymoney, Coleraine and Portrush Junction Railway (BBC&PJR) opened which along with the Belfast & Ballymena Railway provided a rail link between Derry and Belfast. As there was no bridge over the Bann passengers and goods had to change stations at Coleraine. In November 1860 a Viaduct across the Bann was opened finally allowing through traffic between Derry and Belfast.[6]

As well as the mainline between Londonderry and Coleraine there were some small branch lines. The first branch from the small town of Magilligan to Magiligan Point. Magilligan Point is a promontory in the mouth of Lough Foyle and it was hoped a ferry service from here to County Donegal could be established and thus be an extra source of traffic. The four and a half mile line was built without parliamentary approval and appears to have been opened without Board of Trade authorisation in June/July 1855. It appears that it was unprofitable and was closed by October 1855 making it the shortest lived passenger rail line in Ireland.[5] Ironically a seasonal ferry service between Magilligan Point and County Donegal is in operation today.

When the line opened between Londonderry and Limavady in 1852, construction work towards Coleraine started four miles from Limavady station. When the line opened in 1853 this required trains going to Coleraine via Limavady to reverse onto the mainline. Thus a junction station was constructed in 1852 and Limavady became a branch. The Limavady & Dungiven Railway Company (acquired by NCC 1907) built a 10-mile extension from Limavady to Dungiven in 1873 being completed in 1883. The line was worked from the outset by the BNCR (who acquired the Londonderry & Coleraine) as part of the Limavady branch. The branch was completely closed to passengers in 1950 with goods ceasing in 1955. Despite the loss of its branch, Limavady Junction remained open to mainline trains until 1976.[5]

1855 timetable depicting train times for the Magilligan branch. Interestingly it also show that Limavady has not yet become a branch and is still being served by mainline trains.

The L&CR struggled with financial difficulties and from 1861 leased their line to the growing Belfast & Northern Counties Railway (BNCR).[5] This saw the closure of Coleraine Waterside Station with services from Derry running into the BNCR station in Coleraine on the other side of the river. Eventually the BNCR agreed to buyout the L&CR completely in 1871, ending the line's existence as an independent company.[6][5] This was not the end of the railway as it would continue to form part of the mainline between Belfast and Londonderry for the BNCR and its successors. The BNCR invested in the line and constructed a new terminus in Londonderry in 1874, which despite being abandoned in favour of a smaller terminus between 1980-2019 is still in use today.

The BNCR would be acquired by the Midland Railway in 1903 becoming the Northern Counties Committee (NCC). The NCC found itself in London, Midland & Scottish Railway (LMS) ownership following the grouping of Britain's Railways in 1921 and later the Railway Executive after nationalisation in 1948, before eventually being acquired by the Ulster Transport Authority (UTA) in 1949 which would eventually give way to Northern Ireland Railways in 1967 who continue to run the line.

the station in Londonderry built by the BNCR

During the early period of L&CR ownership the company operated a variety of both second hand locomotives and new engines specifically built for them. The L&CR frequently exchanged locomotives with the neighbouring Londonderry & Enniskillen Railway (a predecessor to the Great Northern Railway). The company is not well renowned for its motive power and many of the locomotives were under powered and not suited to the line. Of the locomotives specifically built for the company these were five 2-2-0 Well Tank locomotives, and 0-4-2 and a 2-4-0. The 2-4-0 was of Robert Stephenson specification and built by Longridge and was initially loaned to the Londonderry & Enniskillen in 1847. The 2-2-0 tank engines were of NB Adams patent and built by Sharp, Stewart & Company. The order for these locos was for six however before delivery one was sent to Dublin for the International Dublin Exhibition of 1853, where it was sold to the Newry and Enniskillen Railway and thus never worked on the line. These engines were unsuitable for a line the size of the Londonderry & Coleraine Railway being under powered and unstable. Being outside cylinder locos they were unstable at speed and one lurched off the track in 1855 resulting in one fatality. As such a common practise was to couple two engines back to back. The 0-4-2 was built in 1859 by Grendon, the company also ordered another 2-4-0 from fairbairn but this arrived in 1860 after the BNCR take over and so never ran on the line under L&CR ownership. The company also bought two 2-2-2WTs from the BBC&PJR.[8]

See Northern Counties Committee

The L&CR contributed nine engines to the BNCR fleet upon that companies acquisition of the line. It had no significant influence on the future locomotive policy of the BNCR and most of these inherited locomotives were withdrawn before the turn of the century. The BNCR followed a policy of 2-4-0 locomotives for passenger trains and 0-6-0 locomotives for goods trains mainly built by Sharp, Stewart & Company and Beyer, Peacock & Company.

U2 Class locomotive Number 74 "Dunluce Castle" in the Ulster Folk & Transport Museum

Under the locomotive Superintendentship of Bowman Malcolm the company experimented with compounding and many of these locomotives would survive into NCC ownership. This company was also the first in the world to fit its locomotives with Ross "pop" safety valves invented by R L Ross from Coleraine. This invention would see wide use on British locomotives as well as some of those used overseas.

Under Midland Railway ownership the policy remained largely independent and the building compounds continued. There was also wider use of the 4-4-0 wheel arrangement for passenger locomotives the company owning twenty engines of this wheel arrangement by 1920.

Under LMS ownership a modernisation and standardisation program was introduced. Locomotives built during this period had more of a Midland and LMS influence with the LMS' Derby Works building locos as well as the NCC shops at York Road, Belfast as well as contracts going to outside locomotive companies. The U2 class 4-4-0 is a good example of this with some of the class being built at York Road, some at Derby and some by North British Locomotive Company in Glasgow. In 1933 the largest NCC engines began to appear, these were the W Class 2-6-0s and were largely based LMS Fowler 2-6-4Ts. This design was followed by a tank engine version in 1946, the 2-6-4T WT class. Both of which were highly successful.

NCC WT Class loco no 4

See NI Railways

Class 70 led by power car 72 on an NIR "Sealink" liveried train at Castlerock on 11 August 1984

While Diesel Railcars and Multiple Units (DMU) had been experimented with by the NCC, the UTA developed the process further, developing the Multi Engined Diesel (MED)in 1952. Commonly referred to as in Ireland as railcars it was found these DMUs were not suited to long distance services like the Derry line, the UTA redeveloped the concept and introduced the Multi Purpose Diesel (MPD) in 1957. These railcars were built specifically with the line to Londonderry in mind with the first 10 being allocated for express services between that city and Belfast. The railways of the UTA suffered neglect from government as a result many MPDs were (as were the earlier MEDs) constructed from older coach bodies and frames. Originally these railcars used 275 h.p. Leyland engine, mounted beneath the chassis, however they were later refurbished in the 1960s with recycled engines from the former ex GNR(I) AEC railcars and new 275 hp engines from Rolls-Royce.
While the MPDs were cheap to build and economical to run they were somewhat lacking in passenger comfort compared to locomotive hauled coaches. The UTA designed a DMU which unlike earlier generations of railcars did not place the engine under the floor of a passenger coach but placed it in a specific compartment in the driving vehicle behind the cab. The Class 70 was introduced in 1966. aFitted with a 550 hp English Electric engine they would remain in service until 1986. Under the UTA diesel traction would take over the bulk of the traffic on the Derry line, however steam locomotives continued on the line until the end of the 1960s.

NIR inherited the railway system of the UTA including the Londonderry & Coleraine line in 1967 and continued in the development of DMUs. The Class 80 was a furthering of the concept conceived with the Class 70 and were very similar both mechanically and electrically. It was developed using British Rail Mk2b body shells with a 560 hp English Electric engine. The class was intended to replace the ageing MPD and ex GNRI railcar inherited from the UTA. The class is arguably one of the most successful types of train to run in Ireland north or south and gave NIR many years of service in difficult times. Examples of the class 80 (affectionately nicknamed 'thumpers') remained in passenger service until 2011 with a small number continuing to work sandite trains until 2017.

From 1985 the Class 70s were replaced with the 450 (Castle) Class DMUs built by BREL. They were constructed using the frames of MK1 coaches and the bodyshells of MK3s. They reused the power units of the Class 70s they replaced. Although intended mainly for short branch lines they did occasionally find themselves on services on the Derry line. The last castle was withdrawn in 2012.

Class 4000 No4004 stabled at Coleraine with a Class 3000 in the siding on the left

The first of NIR's 3000 Class DMUs were introduced in 2005. This class was part of a major investment intended to replace the ageing Class 80 'thumpers.' These three car DMUs were built by CAF and fitted with MAN diesel engines giving them a speed of up-to 90 mph. Class 4000 DMUs also built by CAF were acquired from 2011 to completely replace the remaining class 80s and the entire 450 Class. They are externally similar to the 3000 class in appearance but are fitted with an MTU 390KW engine, they also have fewer seating bays in favour of more standing room and only one toilet compared with the two on the 3000s. Like the 3000s they are 3 car units however NIR is purchasing an extra 21 carriages to turn seven of the class into six car units.