Triglyceride

Example of a natural mixed triglyceride with residues of three different fatty acids. The first fatty acid residue is saturated (blue highlighted), the second fatty acid residue contains one double bond within the carbon chain (green highlighted). The third fatty acid residue (a polyunsaturated fatty acid residue, highlighted in red) contains three double bonds within the carbon chain. All carbon-carbon double bonds shown are cis isomers.

The three fatty acids substituents can be the same, but they are usually different. Many triglycerides are known because many fatty acids are known and their combinations are even more numerous. The chain lengths of the fatty acids in naturally occurring triglycerides vary, but most contain 16, 18, or 20 carbon atoms, defined as long-chain triglycerides, while medium-chain triglycerides contain shorter fatty acids. Animals synthesize even-numbered fatty acids, but Bacteria possess the ability to synthesise odd- and branched-chain fatty acids. As a result, ruminant animal fat contains odd-numbered fatty acids, such as 15, due to the action of bacteria in the rumen. Many fatty acids are unsaturated; some are polyunsaturated (e.g., those derived from linoleic acid).[4]

Most natural fats contain a complex mixture of individual triglycerides. Because of their heterogeneity, they melt over a broad range of temperatures. Cocoa butter is unusual in that it is composed of only a few triglycerides, derived from palmitic, oleic, and stearic acids in the 1-, 2-, and 3-positions of glycerol, respectively.[4]

The simplest triglycerides are those where the three fatty acids are identical. Their names indicate the fatty acid: stearin derived from stearic acid, palmitin derived from palmitic acid, etc. These compounds can be obtained in three crystalline forms (polymorphs): α, β, and β′, the three forms differing in their melting points.[4][5]

A triglyceride containing different fatty acids is known as a mixed triglyceride.[6] If the first and third fatty acids on the glycerol differ, then the mixed triglyceride is chiral.[7]

Triglycerides are tri-esters derived from the condensation reaction of glycerol with three fatty acids. Their formation can be summarised by the following overall equation:

CH(OH)(CH₂OH)₂ + RCOOH + R'COOH + R"COOH → RC(O)OCH₂−CH(OC(O)R')−CH₂C(O)OR" + 3H₂O

In nature, the formation of triglycerides is not random; rather, specific fatty acids are selectively condensed with the hydroxyl functional groups of glycerol. Animal fats typically have unsaturated fatty acid residues on carbon atoms 1 and 3. Extreme examples of non-random fats are cocoa butter (mentioned above) and lard, which contains about 20% triglyceride with palmitic acid on carbon 2 and oleic acid on carbons 1 and 3.[4] An early step in the biosynthesis is the formation of the glycerol-1-phosphate:[4]

CH(OH)(CH₂OH)₂ + H₂PO−4 → HOCH₂−CH(OH)−CH₂−OPO₃H⁻ + H₂O

The three oxygen atoms in this phosphate ester are differentiated, setting the stage for regiospecific formation of triglycerides, as the diol reacts selectively with coenzyme-A derivatives of the fatty acids, RC(O)S–CoA:

HOCH₂−CH(OH)−CH₂−OPO₃H⁻ + RC(O)S−CoA + R'C(O)S−CoA → RC(O)O−CH₂−CH(−OC(O)R')−CH₂−OPO₃H⁻ + 2HS−CoA

The phosphate ester linkage is then hydrolysed to make way for the introduction of a third fatty acid ester:

RC(O)O−CH₂−CH(−OC(O)R')−CH₂−OPO₃H⁻ + H₂O → RC(O)O−CH₂−CH(−OC(O)R')−CH₂OH + H₂PO−4

RC(O)O−CH₂−CH(−OC(O)R')−CH₂OH + R"C(O)S−CoA → RC(O)O−CH₂−CH(−OC(O)R')−CH₂−OC(O)R" + HS−CoA

For human nutrition, an important classification of fats is based on the number and position of double bonds in the constituent fatty acids. Saturated fat has a predominance of saturated fatty acids, without any double bonds, while unsaturated fat has predominantly unsaturated acids with double bonds. (The names refer to the fact that each double bond means two fewer hydrogen atoms in the chemical formula. Thus, a saturated fatty acid, having no double bonds, has the maximum number of hydrogen atoms for a given number of carbon atoms – that is, it is "saturated" with hydrogen atoms.)[10][11]

Unsaturated fatty acids are further classified into monounsaturated (MUFAs), with a single double bond, and polyunsaturated (PUFAs), with two or more.[10][11] Natural fats usually contain several different saturated and unsaturated acids, even on the same molecule. For example, in most vegetable oils, the saturated palmitic (C16:0) and stearic (C18:0) acid residues are usually attached to positions 1 and 3 (sn1 and sn3) of the glycerol hub, whereas the middle position (sn2) is usually occupied by an unsaturated one, such as oleic (C18:1, ω–9) or linoleic (C18:2, ω–6).[12])

	Stearic acid (saturated, C18:0)
	Palmitoleic acid (mono-unsaturated, C16:1 cis-9, omega-7)
	Oleic acid (mono-unsaturated, C18:1 cis-9, omega-9)
	α-Linolenic acid (polyunsaturated, C18:3 cis-9,12,15, omega-3)
	γ-Linolenic acid (polyunsaturated, C18:3 cis-6,9,12, omega-6)

While it is the nutritional aspects of polyunsaturated fatty acids that are generally of greatest interest, these materials also have non-food applications. They include the drying oils, such as linseed (flax seed), tung, poppyseed, perilla, and walnut oil, which polymerize on exposure to oxygen to form solid films, and are used to make paints and varnishes.

Saturated fats generally have a higher melting point than unsaturated ones with the same molecular weight, and thus are more likely to be solid at room temperature. For example, the animal fats tallow and lard are high in saturated fatty acid content and are solids. Olive and linseed oils on the other hand are unsaturated and liquid. Unsaturated fats are prone to oxidation by air, which causes them to become rancid and inedible.

The double bonds in unsaturated fats can be converted into single bonds by reaction with hydrogen effected by a catalyst. This process, called hydrogenation, is used to turn vegetable oils into solid or semisolid vegetable fats like margarine, which can substitute for tallow and butter and (unlike unsaturated fats) can be stored indefinitely without becoming rancid. However, partial hydrogenation also creates some unwanted trans acids from cis acids.[13]

In cellular metabolism, unsaturated fat molecules yield slightly less energy (i.e., fewer calories) than an equivalent amount of saturated fat. The heats of combustion of saturated, mono-, di-, and tri-unsaturated 18-carbon fatty acid esters have been measured as 2859, 2828, 2794, and 2750 kcal/mol, respectively; or, on a weight basis, 10.75, 10.71, 10.66, and 10.58 kcal/g – a decrease of about 0.6% for each additional double bond.[14]

The greater the degree of unsaturation in a fatty acid (i.e., the more double bonds in the fatty acid) the more vulnerable it is to lipid peroxidation (rancidity). Antioxidants can protect unsaturated fat from lipid peroxidation.

Linseed oil and related oils are important components of useful products used in oil paints and related coatings. Linseed oil is rich in di- and tri-unsaturated fatty acid components, which tend to harden in the presence of oxygen. This heat-producing hardening process is peculiar to these so-called drying oils. It is caused by a polymerization process that begins with oxygen molecules attacking the carbon backbone.

Triglycerides are also split into their components via transesterification during the manufacture of biodiesel. The resulting fatty acid esters can be used as fuel in diesel engines. The glycerin has many uses, such as in the manufacture of food and in the production of pharmaceuticals.

Staining for fatty acids, triglycerides, lipoproteins, and other lipids is done through the use of lysochromes (fat-soluble dyes). These dyes can allow the qualification of a certain fat of interest by staining the material a specific color. Some examples: Sudan IV, Oil Red O, and Sudan Black B.

Click on genes, proteins and metabolites below to link to respective articles. [§ 1]

[[File:

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

[[

]]

|alt=Statin Pathway edit]]

Statin Pathway edit

1. The interactive pathway map can be edited at WikiPathways: "Statin_Pathway_WP430".

• Diglyceride acyltransferase, an enzyme that produces triglycerides
• Glycerol-3-phosphate acyltransferases, enzymes involved in early step in biosynthesis of triglycerides
• Phosphatidic acids, playing a role in biosynthesis of triglycerides
• Medium-chain triglycerides
• Lipid profile
• Lipids
• Vertical auto profile
• Hypertriglyceridemia, the presence of high amounts of triglycerides in the blood.

• Lowering Triglycerides (EMedicineHealth.com; October 2020)