Mauro Forghieri

Forghieri (right) with John Surtees inspecting a Ferrari 1512 in 1965 at the Nürburgring

Despite his initial interest in aviation design, Forghieri accepted an internship offer from Ferrari, to which he had been introduced by his father.[7] Beginning in spring of 1960, he started an apprenticeship in the engine department. Forghieri began working alongside many engineers involved in Ferrari's early history, including Vittorio Jano, Carlo Chiti and Luigi Bazzi, as well as race director Romolo Tavoni. He also worked alongside Giampaolo Dallara, who joined Ferrari shortly after Forghieri in 1960. Forghieri's early work at the factory involved both racing cars and production road cars.[5][6]

In 1961, some key figures at Ferrari, including chief designer Carlo Chiti, left to join the breakaway ATS Formula One team, in an event that became known as "the great walkout". Forghieri remained as the only credentialed engineer on staff. Soon after the walkout, Forghieri was personally asked by Enzo Ferrari to begin studying the "full technical questions of the Factory" (Forghieri's words).[6]^: 18 As he was only 27 years of age at the time, Forghieri received guidance from a few more experienced staff members, including Franco Rocchi, Walter Salvarani and Angelo Bellei. Forghieri was soon appointed technical director for racing cars, a position he would remain in until 1984. His responsibilities included overseeing technical development, managing the technical section during races and collaborating with other Ferrari departments, including the testing department and the drafting department.[6]

Forghieri left his position as technical director in 1984. In January 1985, he began work on the Ferrari 408 4RM concept car. The 408 project was completed in Spring of 1987 and Forghieri departed Ferrari for good shortly after.[6][8]

Forghieri was involved to some degree in the development of every racing car produced by the Factory between his hiring after graduation and his departure in 1987.[9]

The sports racing cars designed under Forghieri's supervision included the GT-class 250 GTO, the development of which Forghieri continued after the original team headed by Chiti and Giotto Bizzarrini left during the 1961 walkout.[10] Other GT-class cars included competition versions of the 275 GTB[11] and the 330 LMB. Sports prototypes designed by Forghieri's team included the P series and later iterations of the Dino series, starting with the 1965 Dino 166 P.[8] Forghieri stated that the 1967 330 P4 was his favorite out of all the cars he designed.[12]

In 1964, Forghieri designed the V8-powered Ferrari 158, in which John Surtees won the 1964 Formula One World Championship. The 158 and the Ferrari 1512 shared a Forghieri-designed aluminum monocoque chassis, the first use of this technology in a Ferrari F1 car.[8][13]

Forghieri (kneeling, right) with driver Carlos Reutemann testing the Ferrari 312 T3 at Zandvoort in 1978

Beginning in 1966, Forghieri designed the Ferrari 312 series (consisting of the 312, 312B and 312T Formula One cars and 312P and 312PB sportscars).[8] In 1979, he designed a semi-automatic transmission for the 312T, which was tested by Gilles Villeneuve but never used in competition. This predated the use of a similar system in the 1989 Ferrari 640 F1 car and the introduction of the roadgoing "F1" automated manual transmission in the 1997 F355.[14]^: 65[15] In 1979 he began work on Ferrari's first turbocharged engine, which debuted in the 1981 126 C.[16]^: 197 Under his guidance, Ferrari won the driver's F1 world championship title four times, with John Surtees (1964), Niki Lauda (1975 and 1977), and Jody Scheckter (1979). Ferrari also won the constructors F1 world championship title seven times.[9]

In September 1987, Forghieri joined Lamborghini Engineering,[6] a department created by Lee Iacocca, then CEO of Chrysler, who had bought the Emilian car firm Lamborghini.[17]

In that organization, which had ex-Ferrari Daniele Audetto as sports director, Forghieri designed the naturally aspirated Lamborghini 3512 V12 engine, which made its Formula One racing debut at the 1989 Brazilian Grand Prix. The V12 engine was used by the Larrousse/Lola team during the 1989 F1 season.[18] This engine was also used in the 1990 Lotus 102 F1 car.[19]

Following the encouraging performance of the engine, the project of designing a complete F1 car was conceived, thanks to financing by the Mexican businessman Fernando Gonzalez Luna. The newly-formed team was named GLAS F1, from an abbreviation of Gonzales Luna Associates. Former journalist Leopoldo Canettoli was picked to run the team. The car's suspension and gearbox were designed by Forghieri and the bodywork was designed by Mario Tolentino. The first complete car, the GLAS 001, was slated for a debut at the 1990 Mexican GP, but the day before the official presentation to the press, Gonzalez Luna disappeared with a conspicuous amount of money that had been paid by sponsors. Following Luna's disappearance, the car and team remained in financial limbo until the team was purchased by Carlo Patrucco in July 1990. Patrucco created Modena Team (also known as the Lamborghini or "Lambo" team) and the Forghieri/Tolentino-designed car debuted as the Lambo 291 at the 1991 United States Grand Prix.[20][21]

In 1991, the Lamborghini Engineering department was completely reorganized by Chrysler enterprise and Forghieri was replaced by Mike Royce.[22] In 1992, he became the technical director of the re-emerging Bugatti, where he stayed until 1994.[23] While at Bugatti, Forghieri was involved in the development of the EB 110 and the EB 112.[24][25]

In 1994, he was called as an expert in the trial relating to the death of driver Ayrton Senna at the 1994 San Marino Grand Prix.[26]

On 1 January 1995, Forghieri co-founded with Franco Antoniazzi and Sergio Lugli the Oral Engineering Group, a mechanical design company.[27][28] Forghieri was active in company operations, which include design, research and development of automobile, motorcycle, marine and go-kart engines and components.[27] Clients include BMW, Bugatti, and Aprilia.[29] Oral Engineering was commissioned to convert the Ferrari Pinin concept car from a static display into a driveable vehicle.[30]

Around 2005, Forghieri joined Project 1221, an Italian automobile company developing a new MF1 sports car, as chief engineer.[31][32]