Mecklenburg G 3

The Mecklenburg Class G 3 was an early German steam locomotive operated by the Grand Duchy of Mecklenburg Friedrich-Franz Railway. Formerly the Class IX it was a copy of the Prussian G 3.

Mecklenburg IX
Mecklenburg G 3
Type and origin
Build date1887–1895
Total produced8
Specifications
Configuration:
  Whyte0-6-0
Gauge1,435 mm (4 ft 8+12 in)
Driver dia.1,350 mm (4 ft 5+18 in)
Length:
  Over beams15,176 mm (49 ft 9+12 in)
Axle load13.31 t (13.10 long tons; 14.67 short tons)
Adhesive weight39.94 t (39.31 long tons; 44.03 short tons)
Service weight39.94 t (39.31 long tons; 44.03 short tons)
Boiler pressure10 kgf/cm2 (981 kPa; 142 lbf/in2)
Heating surface:
  Firebox
1.53 m2 (16.5 sq ft)
  Evaporative124.8 m2 (1,343 sq ft)
CylindersTwo
Cylinder size450 mm (17+1116 in)
Piston stroke630 mm (24+1316 in)
Performance figures
Maximum speed45 km/h (28 mph)
Career
Numbers
  • MFFE: 350–357
  • (DRG: 53 7701–7705)

Description

In total, there were eight G 3's in the Mecklenburg fleet, which had been built between 1887 and 1895. Of these two originally came from the Lloyd Railway, Neustrelitz - Warnemünde. The engines had a steam brake and an outside valve gear of the Allan type. Five engines were intended for transfer to the Deutsche Reichsbahn, to be numbered 53 7201 to 53 7205; however they were withdrawn before the renumbering plan was implemented.[1]

The locomotives were given Class 3 T 10.5 tenders.

See also

Notes

  1. Hütter (2012), p. 445.

References

  • Hütter, Ingo (2012). Die Dampflokomotiven der Baureihen 50 bis 53 der DRG, DRB, DB, und DR (in German). Werl: DGEG Medien. ISBN 978-3-937189-63-5.

Further reading

  • Spielhoff, Lothar (1990). Länderbahn-Dampf-Lokomotiven. Band 1: Preußen, Mecklenburg, Oldenburg, Sachsen und Elsaß-Lothringen (in German). Stuttgart: Franckh'sche Verlagshandlung. ISBN 3-440-06145-0.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.