Melrose/Williamson House
Melrose, also known as the Williamson House, is a historic plantation house located near Yanceyville, Caswell County, North Carolina. It consists of two two-story, frame blocks connected by a 1+1⁄2-story breezeway. The original section dated to about 1780 and is a two-story, frame single pile block with Federal style details. The later section was built about 1840, and is a two-story, frame single pile block with Greek Revival style details. The later section features a portico supported by four unfluted Doric order columns. Also on the property is an octagonal, Williamsburg-style pump house with a conical roof.[2][3]
Melrose/Williamson House | |
.jpg.webp) Melrose, HABS Photo, 1938 | |
   | |
| Nearest city | Off NC 62, near Yanceyville, North Carolina |
|---|---|
| Coordinates | 36°25′42″N 79°17′51″W |
| Area | 172 acres (70 ha) |
| Built | c. 1780, c. 1840 |
| NRHP reference No. | 85000379[1] |
| Added to NRHP | February 28, 1985 |
It was added to the National Register of Historic Places in 1985.[1]
References
- "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
- unknown (n.d.). "Melrose/Williamson House" (PDF). National Register of Historic Places - Nomination and Inventory. North Carolina State Historic Preservation Office. Retrieved 2014-08-01.
- "Melrose, The Williamson House" (PDF). NC.gov. Retrieved September 26, 2019.
External links
- Historic American Buildings Survey (HABS) No. NC-119, "Williams House, NC Route 62 & State Route 1596, Yanceyville, Caswell County, NC", 1 photo
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.