Hard hat

Construction worker wearing an MSA Skullgard hard hat at Douglas Dam, Tennessee (TVA), 1942

In the early years of the shipbuilding industry, workers covered their hats with pitch (tar), and set them in the sun to cure, a common practice for dock workers in constant danger of being hit on the head by objects dropped from ship decks.

Management professor Peter Drucker credited writer Franz Kafka with developing the first civilian hard hat while employed at the Worker's Accident Insurance Institute for the Kingdom of Bohemia (1912), but this information is not supported by any document from his employer.[1]

In the United States, the E.D. Bullard Company was a mining equipment firm in California created by Edward Dickinson Bullard in 1898, a veteran of the industrial safety business for 20 years. The company sold protective hats made of leather. His son, E. W. Bullard, returned home from World War I with a steel helmet that provided him with ideas to improve industrial safety. In 1919 Bullard patented a "hard-boiled hat" made of steamed canvas, glue and black paint. That same year, the U.S. Navy commissioned Bullard to create a shipyard protective cap that began the widespread use of hard hats. Not long after, Bullard developed an internal suspension to provide a more effective hat. These early designs bore a resemblance to the steel M1917 "Brodie" military helmet that served as their inspiration.

MSA introduced the new non-conductive thermoplastic, reinforced Bakelite-based "Skullguard" Helmet in 1930. Able to withstand high temperatures and radiant heat loads in the metals industry up to 350 °F (177 °C) without burning the wearer, it was also safe around high-voltage electricity. Bakelite was used to provide protection rigid enough to withstand hard sudden impacts within a high-heat environment but still be light enough for practical use. Made of a Bakelite resin reinforced with wire screen and linen, the Skullgard Helmet is still manufactured in nearly two dozen models in 2021. MSA also produced a low-crown version for coal miners known as Comfo-Cap Headgear, likewise offered with fittings for a headlamp and battery.

On the Hoover Dam project in 1931, hard hat use was mandated by Six Companies, Inc. In 1933, construction began on the Golden Gate Bridge in San Francisco California. Construction workers were required to wear hard hats, by order of Joseph Strauss, project chief engineer. Strauss strove to create a safe workplace; hence, he installed safety nets and required hard hats to be worn while on the job site. Strauss also asked Bullard to create a hard hat to protect workers who performed sandblasting. Bullard produced a design that covered the worker's face, provided a window for vision and a supply of fresh air via a hose connected to an air compressor. The MSA Skullgard was the best, but quite expensive. Many hard hats were made of cheaper steel.

Several Workmen wearing ribbed metal hard hats, and one (right) in a MSA Skullgard, at the site of a Texas oil well in 1940

Lighter affordable aluminum became popular for hard hats around 1938, except for electrical applications.

Fiberglass came into use in the 1940s.

MSA V-Gard Helmet with Fas-Trac suspension

Injection molded thermoplastics appeared in the 1950s, and began to dominate in the 1960s. Easy shape with heat, it is cost-effective to manufacture. In 1952, MSA offered the Shockgard Helmet to protect linemen from electrical shock of up to 10,000 volts. In 1961, MSA released the Topgard Helmet, the first polycarbonate hard hat. 1962 brought the V-Gard Helmet, which today is the most widely used hard hat in the United States. Today, most hard hats are made from high-density polyethylene (HDPE) or advanced engineering resins, such as Ultem.

In 1997, ANSI allowed the development of a ventilated hard hat to keep wearers cooler. Accessories such as face shields, sun visors, earmuffs, and perspiration-absorbing lining cloths could also be used; today, attachments include radios, walkie-talkies, pagers, and cameras.

U.S. Navy sailors in February 2007 load cargo onto a container ship in Antarctica

Because hard hats are intended to protect the wearer's head from impacts, hats are made from durable materials, originally from metal, then Bakelite composite, fiberglass, and most-commonly (from the 1950s onward) molded thermoplastic.

Some contemporary cap-style hard hats feature a rolled edge that acts as a rain gutter to channel rainwater to the front, allowing water to drain off the bill, instead of running down the wearer's neck. A wide-brimmed cowboy hat-style hard hat is made,[2] although some organizations disallow their use.

Ameriza Ventilated Helmet

Organizations issuing hard hats often include their name, logo, or some other message (as for a ceremonial corner stone laying) on the front.

Colors and identification

U.S. Navy sailors aboard the USS John C. Stennis wearing blue hard hats in 2001

Hard hat colors can signify different roles on construction sites. These color designations vary from company to company and worksite to worksite. Government agencies such as the United States Navy and DOT have their own hard hat color scheme that may apply to subcontractors. On very large projects involving a number of companies, employees of the same company may wear the same color hat.

A U.S. Navy photographer complies with a jobsite hard hat requirement

Archaeologists wearing hard hats while excavating remains of Ancient Rome

OSHA regulation 1910.135 states that the employer shall ensure that each affected employee wears a protective helmet when working in areas where there is a potential for injury to the head from falling objects. Additionally, the employer shall ensure that a protective helmet designed to reduce electrical shock hazard is worn by each such affected employee when near exposed electrical conductors which could contact the head.[3]

The OSHA regulation does not specifically cover any criteria for the protective helmets, instead OSHA requires that protective helmets comply with ANSI/ISEA Z89.1-2014 – American National Standard for Industrial Head Protection.

Each hard hat is specified by both Type and Class. Types include:

• ANSI Type I / CSA Type 1 hard hats meet stringent vertical impact and penetration requirements.
• ANSI Type II / CSA Type 2 hard hats meet both vertical and lateral impact and penetration requirements and have a foam inner liner made of expanded polystyrene (EPS).

Classes:

• Class E (Electrical) provides dielectric protection up to 20,000 volts.
• Class G (General) provides dielectric protection up to 2,200 volts.
• Class C (Conductive) provides no dielectric protection.

A hard hat is specified by both Type and Class; for example: Type I Class G.

ANSI standards for hard hats set combustibility or flammability criteria. ANSI Z89 standard was significantly revised in 1986, 1997 and 2003. The current American standard for hard hats is ISEA Z89.1-2009, by the International Safety Equipment Association that took over publication of the Z89 standard from ANSI. The ISO standard for industrial protective headgear is ISO 3873, first published in 1977.

In the UK, the Personal Protective Equipment (PPE) Regulations 1992 specifies that hard hats are a component of PPE and, by law, all those working on construction sites or within hazardous environments are required to wear hard hats.

In Europe all hard hats must have a manufacturer set lifespan, this can be determined from the expiry date or a set period from the manufacture date, which is either stuck to the inside or embossed in the hard hat's material.

• 
  Full-brimmed hard hat
• 
  Baseball cap style safety helmet with visor and chin strap
• 
  With headset
• 
  With a light mount
• 
  Shock-absorbing suspension system inside a typical hard hat
• 
  An example of an early leather hard hat.

Wikimedia Commons has media related to Hard hats.

• Firefighter's helmet
• Goggles
• Hard hat mounted mirror
• Protective clothing
• Safety engineering
• Steel-toe boots