KM3NeT

KM3NeT Digital Optical Module (DOM) in the laboratory

In the future and pending funding, the full neutrino telescope will contain in the order of 12000 pressure-resistant glass spheres attached to about 600 flexible vertical strings - or detection units - anchored at the seabed. At the end of the current phase of construction, the telescope will comprise 345 strings, 230 in the ARCA detector and 115 in the ORCA detector. The detection units support 18 spherical sensor modules each. The position of the modules and the time of arrival of light on the photomultipliers inside is measured with high precision. Each optical module is about 44 centimetres (17 in) in diameter, contains 31 three-inch photomultiplier tubes with supporting electronics, and is connected to shore via a high-bandwidth optical network.[2] Together, the ARCA and ORCA detectors contain 6210 optical modules. Via an electro-optical network of cables and subsea junction boxes the optical modules are connected to control stations on shore for electrical power, for detector control and for data transmission.[3]

Artist's impression of the KM3NeT detector.

Since the strings with optical modules move with the currents in the deep sea, the position and orientation of the optical modules and thus of the photomultoplier tubes inside is dynamically monitored using an acoustic system and a compass system, respectively.[4] Nanobeacons in each optical module are used for time calibration.[5]

At the shore of each KM3NeT installation site, a farm of computers performs the first data filter in the search for the signal of cosmic neutrinos, prior to streaming the data to a central KM3NeT data centre for storage and further analysis by the KM3NeT scientists.

The KM3NeT-It site, at a depth of 3400 m, hosts the ARCA (Astroparticle Research with Cosmics in the Abyss) detector, which with more widely spaced optical modules is optimised for the detection of high-energy cosmic neutrinos in the TeV–PeV range. Its strings are about 700 m long, spaced 90 m apart.

The KM3NeT-Fr site, at a depth of 2475 m, hosts the ORCA (Oscillation Research with Cosmics in the Abyss) detector, a more compact array with more closely spaced optical modules optimised for the detection of neutrinos in the GeV range. ORCA will consist of 115 strings in a 20 m triangular grid, with a 9 m spacing between the optical modules in a string. Overall, the array is about 210 m in diameter, and the strings are 200 m long.

Sonar scan of string anchors in ORCA.

The design of the KM3NeT neutrino telescope is very modular and construction can be phased in time. In 2012, the first phase of the implementation of the KM3NeT research facility started with the construction of the seabed infrastructures at the KM3NeT-Fr and KM3NeT-It sites. A prototype KM3NeT optical module took data successfully during about a year in 2013-2014 part of the ANTARES telescope.[6] At the KM3NeT-It site a prototype string took data in 2014-2015, also during about one year.[7]

ARCA junction box at the seabed.

The first phase of construction has been successfully terminated. The second phase of construction has begun and comprises the completion of the ARCA and ORCA detectors at the KM3NeT-It and KM3NeT-Fr sites, respectively.

For the design of the neutrino detector, KM3NeT builds on the experience of the ANTARES telescope, which was operated from 30 May 2008 to the spring if 2022. It was the largest neutrino telescope in the Northern hemisphere. In the Southern hemisphere, at Antarctica, the IceCube Neutrino Observatory is already operational since many years. In Lake Baikal the Gigaton Volume neutrino Detector GVD is operated. Together, the three telescopes view the full sky. The four collaborations together have initiated the Global Neutrino Network GNN.

As a unique experiment in Europe and thanks to the success of its predecessor ANTARES, KM3NeT has a special position within the European context. Throughout its history KM3NeT has received support from the European Union, via the participation in several European projects, but also thanks to the acknowledgement of the value of KM3NeT by the European institutions.

Indeed, in 2006 KM3NeT was included in the European Strategy Forum on Research Infrastructure (ESFRI) roadmap, which recognises as a priority the KM3NeT research infrastructure for Europe’s scientific needs for the next 10-20 years. The support was renewed by the Council of the European Union for the 2019-2026 period. While the first phase of the project led to the engineering of the modular detector and the construction of prototypes, the objective of KM3NeT 2.0 is to adapt to the scientific and technological progress made in the field of neutrino astroparticle physics. Therefore, the second inscription in the ESFRI roadmap reaffirms the interest of KM3NeT during its effective construction phase.

Along with the Council, the implementation of KM3NeT installation sites also benefitted from funding through the European Regional Development Fund (ERDF), confirming the economic, social and territorial potential of KM3NeT at regional level.

In addition, the experiment also benefited from different funding through European research and innovation programmes:

• From 2006 to 2009, the Design Study was supported by the European Sixth Framework Programme (EU FP6). The objective was to address the scientific and technical design issues related to the installation of the telescope.
• From 2008 to 2012, the Preparatory Phase for the KM3NeT infrastructure was funded by the European Seventh Framework Programme (EU FP7) in order to bring the telescope to its construction stage.
• From 2017 to 2020, KM3NeT benefited from the Horizon 2020 programme through the implementation of the KM3NeT-INFRADEV project, which objective was to support the development of the legal and governance aspects of the experiment, as well as to explore sustainable solution for the operation of the research infrastructure.
• From 2023 to 2026, these objectives are being taken up as part of the KM3NeT-INFRADEV2 project, funded by Horizon Europe, that should lead to the full implementation of the KM3NeT Research Infrastructure.

Finally, KM3NeT participated in many European projects, led by partners of the Collaboration. For example, KM3NeT takes part in the EMSO network, by providing long-term access for Earth and Sea sciences research. KM3NeT participated in the ASTERICS project,[8] and is still participating in the EOSC European initiative for Open Science as well as in the related ESCAPE project.[9] Last but not least, KM3NeT is also engaged in citizen science, notably through the REINFORCE project.[10]

Most of these EU projects have been the means of financing and implementing the KM3NeT Collaboration's commitment to deliver a positive experiment in terms of socio-economic and environmental impacts.[11] In particular:

• Education and training: Via its participating research institutes and university groups, KM3NeT contributes to the education of the next generation of undergraduate and graduate students and to postdoctoral training. Students are given the opportunity to participate in all activities of the Collaboration, ranging from presentations in Collaboration meetings to participation in "shifts" monitoring the operation of the detectors. Also, regarding the training of younger people, KM3NeT strongly engages in citizen science.
• Economic benefit: The funding authorities of the participating Parties in the Collaboration support investments in the construction and operation of the detectors and the involvement of scientists, engineers, students and administrative staff. Relevant companies profit from the licence-free cutting-edge technologies and from orders for innovative products. Finally, by working with locally-based companies, KM3NeT contributes to local economic development on sites.
• Diversity and inclusion: The KM3NeT Collaboration is committed to creating an inclusive working environment with equal opportunities for all talents. Recognising the importance of diverse teams for the successful realisation of the experiment, the Collaboration has adopted a policy strategy, which includes measures taken to provide a welcoming and inclusive working environment to all talents, regardless of characteristics such as, but not limited to gender, age, disability, ethnicity, religion or sexual orientation and to support the professional advancement of all. The diversity policy also includes measurable goals for the number of women and early-career scientists in all positions, but in particular in leadership positions in the Collaboration.[12]
• Environmental awareness: One of the objectives of the Collaboration is to demonstrate KM3NeT as a role model for a research infrastructure with high sustainability standards and societal and environmental awareness. In order to reach this ambition, a number of initiatives have been taken to ensure a sustainable future for the experiment. For example, a plan for making the three sites of KM3NeT carbon-neutral facilities using renewable energy sources was established, solutions and procedures for transforming the daily activities of the KM3NeT community to a sustainable configuration are being identified under the INFRADEV2 project and studies are being conducted regarding potential impact of the KM3NeT decommissioning on the environment, with the objective to define recycling schemes.[13] Finally, KM3NeT deploys a number of citizen science initiatives in order to raise environmental awareness among the general public.

• 
  Electronics to read out the photomultiplier tubes and calibration instrumentation inside the KM3NeT DOM
• 
  The KM3NeT LOM – the launching vehicle of Optical Modules – being loaded onto the RV Pelagia deployment vessel. A full string detection is rolled onto the LOM. After arrival at the seabed the string is unrolled to its full length.
• 
  A prototype KM3NeT DOM installed in the instrumentation line of the ANTARES neutrino telescope. The DOM is operational since April 2013.
• 
  Artist's impression of the KM3NeT neutrino telescope.
• 
  KM3NeT optical modules attached with bollards to the supporting Dyneema ropes of a string.
• 
  Imahe of a KM3NeT multi-PMT (31) optical module.
• 
  Image of the KM3NeT LOM (Launcher of Optical Modules) with a string coiled in, on the ship's deck, prior to deployment.
• 
  Top view of a KM3NeT LOM with a string coiled in.
• 
  Image of the KM3NeT LOM with a string coiled in, waiting for shipment.

• Adcock, C. (24 June 2016). "KM3NeT: The next big thing in neutrino physics". JPhys+.

• Official website
• KM3NeT's channel on YouTube
• KM3NeT experiment record on INSPIRE-HEP