Cumbres and Toltec Scenic Railroad

In 2002, the C&TSRR was shut down twice, first in the spring to resolve track bed issues. In the summer, operations were suspended again because of wildfire dangers.[7]

On June 23, 2010, an unknown fire severely damaged Lobato Trestle, a deck girder bridge located approximately four miles (6.4 km) east of Chama. While the bridge was out of service, the C&TSRR operated limited services from the Chama end while trains from Antonito only traveled to Osier and back.[8] After undergoing extensive refurbishment, the bridge was reopened on June 20, 2011.[9]

In 1973, the Cumbres and Toltec Scenic Railroad was listed on the National Register of Historic Places and its boundaries were increased in 2007.[1] The railroad was designated as a National Historic Civil Engineering Landmark by the American Society of Civil Engineers in 1976.[10] In 2012, the railroad was designated a National Historic Landmark, for its engineering, well-preserved infrastructure and equipment and the role of the railroad in the development of the region it served.[11]

After the C&TSRR was formed in 1971, a bi-state agency, the Cumbres and Toltec Scenic Railroad Commission was created. Railroad operations were then contracted to third-party rail operators. In 2012, after long discussions with other third-parties bidding to take over, the Commission formed its own operating company, Cumbres and Toltec Operating LLC[14] They hired John Bush, a veteran of the railroad, to become president on December 13, 2012.[15] Bush retired on November 14, 2020.[16]

In 1988, a nonprofit organization called the Friends of the Cumbres and Toltec Scenic Railroad was established to preserve the history of the railroad and help maintain infrastructure and rolling stock. The Friends of the C&TSRR also participates in various education programs and provides the railroad guides, known as docents, who inform passengers of historical aspects of the railroad as well as locations of interest.[17]

• Chama, New Mexico 36°54′N 106°35′W
• Cumbres Pass 37°1′N 106°27′W
• Osier, Colorado 37°1′N 106°20′W
• Toltec Gorge, New Mexico 36°59′N 106°18′W
• Sublette Station 36°59′N 106°14′W
• Antonito, Colorado 37°4′N 106°1′W

The Chama yard is located at milepost 344.12. Here, the railroad stores most of its freight cars and both rotary snowplows, Rotary OY and Rotary OM. On the east side is part of the original roundhouse from the D&RGW. A fire burned most of the roundhouse years ago; what remains is used as storage for parts. K-37 locomotive No. 497 is currently stored here.[18] On the far side of the old roundhouse section are the shops where the engines are serviced and prepared for the next day. The shops have two stalls and can hold two engines inside simultaneously. On the west side of the yard is the original depot from the late 1800s, where train tickets can be purchased. There is a gift shop with various items for sale. On the south end of the yard, over 100 freight cars are visible. The yard is open and can be toured by anyone. About 40 of the cars in the yard are operational.[19]

C&TSRR No. 487 in the Chama Yard

From Chama, the railroad proceeds northeast after crossing Rio Chama. About one mile (1.6 km) later, the railroad begins up the mountain on a grade averaging 4%. The first siding on the line is at Lobato (MP: 339.99). Here are remnants of a stock pen and a water tank made for a movie in the 1980s. The tank was used later in Indiana Jones and the Last Crusade. The water tank was knocked over in 2006, succumbing to age and high winds. Lobato Trestle is located at Lobato, and is the second-highest trestle on the line, built in 1883. Due to weight restrictions, only one locomotive at a time is allowed to cross. Hence, all double-headers must separate and rejoin on the other side. The bridge was rebuilt in 2011 after a fire nearly destroyed it.

From here to Cumbres, the railroad operates on the north side of Wolf Creek. There are several old stations along the line. The first is Dalton (MP: 335.5). There is nothing at Dalton besides the station sign. Next on the journey to the top at Cumbres, the train passes Cresco Siding and water tank (MP 335.5). Just before this, the track crosses the state line for the first time. This water tank is used when operating smaller engines, such as No. 315 and No. 168, and for rotary trains. The route then enters a small canyon past Hamilton's Point. Exiting the canyon, the track makes a turn to the northwest and up Wolf Creek through Coxo. At Coxo, there is a short siding for maintenance equipment and a station sign. At a narrow point of the valley, the track makes a horseshoe turn up to Windy Point. Windy Point is an outcrop of volcanic rock where the wind blows so hard that the smoke from the trains often will blow towards the front of the train instead of the rear. This is less than a quarter of a mile from Cumbres Pass, the highest point on the line

At Cumbres (MP 330.60), elevation 10,015 ft (3,053 m), is the Car Inspector's House, Water Standpipe, remnants of the extensive snow shed and the Section House, which replaced the original depot after it was demolished in the 1950s. Cumbres is the highest point on the railroad and the highest elevation of any narrow-gauge railroad in North America. Upon reaching the pass, the engine must take on water, as it has used about 3⁄4 of its supply. After taking on water and a short brake test, the train departs to the east and begins the downhill section. At “Tanglefoot Curve”, the track doubles back on itself to lose elevation gradually. Here, the trains going downhill will perform a boiler blowdown. This is where the engine releases steam from the boiler to clear sediments at the bottom of the boiler. From there, the track turns north up the Los Piños Valley.

The track continues a gentle descent on the average 1.45% grade to the north until it reaches Los Piños tank. This tank is always full and is used for small engines and rotary trains. The track takes a gentle loop off to the west and comes back to the east at the station of Los Piños (MP: 324.8). There is nothing here except a siding and the station sign. The track then turns back north towards Osier, Colorado. Just before Osier, at Milepost 320, the track crosses Cascade Trestle. This is the highest trestle on the entire line, sitting at 137 ft (42 m) above the river below. The train then stops at Osier, Colorado (MP: 318.40), where passengers are served lunch in a modern, wooden indoor facility.

C&TSRR steam locomotive No. 484

This section covers the eastern portion of the line, from the small cattle and junction town of Antonito to Osier, the mid-point of the line.

Antonito (MP 280.70) is a small company town of the former railroad main line. It is home to the C&TSRR car shop, a water tank and other relics. Most of the facilities were built by the C&TSRR, since the original rail yard, wye, and station were not sold to the states of Colorado and New Mexico.

Shortly after leaving the station, the train heads straight for three miles (4.8 km) until coming into some hills. Shortly thereafter, the train crosses Ferguson's Trestle (MP 285.87), named for a man who was hanged from a locomotive there. The original trestle was featured in the 1988 television movie Where the Hell's That Gold?, starring Willie Nelson and Delta Burke. In filming, an explosion mishap occurred and the bridge was burned down. Traffic was halted for a week while the C&TSRR built a temporary bridge. Next winter, the trestle was rebuilt, matching the original. About three miles (four point eight kilometres) later, the train makes the first of 11 crossings into New Mexico and climbs a ledge up to a lava mesa. Lava (291.55) has the old water tank from Antonito, which was moved here in 1971. The track goes around a horseshoe curve that is also used as a reversing loop to turn the rotary snow plow trains from Chama.

Heading west, the track rounds Whiplash Curve, a double-horseshoe curve. About one mile (1,600 m) from Whiplash Curve lie the sidings and wye at Big Horn. Past Big Horn, the train loops around the sides of mountains, going through horseshoe curves before reaching the first water stop at Sublette.

Sublette is an abandoned railroad section camp, consisting of a log bunk house, a section house, a siding and other buildings. There was once a water tank at the western end of the siding. Today, in its place, there is a standpipe. After the tender is filled with water, the train slowly creeps into lush aspen groves.

Following Sublette is Toltec Siding, which in the 1950s was the meeting place for oil well pipe trains moving between Chama and Farmington to Alamosa. Shortly afterwards, trains pass through Mud Tunnel, which is unique because it is lined with wooden pillars due to being bored through soft volcanic ash. When the beams in the tunnel collapsed, the D&RGW made a "shoo fly" (a temporary by-pass) to allow passengers and small cars to be moved around the tunnel to an awaiting train. After passing through this, trains pass around Phantom Curve and through Calico Cut, then slow when entering the longer Rock Tunnel. Trains exit the tunnel entering Toltec Gorge, where the track is 600 ft (180 m) above the river. The line then follows the river to Osier.

• Line's terminus in Antonito
• 
  The entrance to the C&TS yard in Antonito, October 2012
• 
  The station and shed in Antonito, October 2012
• 
  The water tower in Antonito, October 2012
• 
  The yard in Antonito, October 2012
• 
  The station building in Antonito, October 2012

• Line's terminus in Chama
• 
  The coaling tower in Chama, October 2012
• 
  The water tower in Chama, October 2012
• 
  The shop in Chama, October 2012
• 
  The yard in Chama, October 2012
• 
  The depot in Chama, October 2012

All of the steam locomotives operating on the C&TSRR are former Denver and Rio Grande Western Railroad locomotives. The railroad owns three classes of steam locomotives. The K-27, K-36 and K-37 engines are all outside frame 2-8-2 "Mikado" engines built by Baldwin Locomotive Works. As of 2023, of the ten steam locomotives currently owned by the C&TSRR, Nos. 463, 484, 487, 488 and 489 are all operational.

Locomotive 497, a class K-37 locomotive, was restored to operating condition for the Durango and Silverton Narrow Gauge Railroad in 1984 and was traded to the C&TSRR in late October 1991 in exchange for class K-36 locomotive 482. Locomotive 497 was later taken out of service indefinitely in October 2002 and currently sits in storage in the Chama roundhouse awaiting an overhaul. On February 16, 2022, the railroad announced that K-37 locomotives 492 and 497 will both be evaluated to see which one is in better shape to be restored back to operating condition. After careful evaluation, locomotive 492 was chosen for restoration instead of locomotive 497. On August 9, 2023, locomotive 492 was moved off of its storage track and moved into the Chama roundhouse in preparation for the restoration. Currently, the C&TSRR is restoring locomotive 492 to burn coal and will also be temporarily using locomotive 497's tender behind locomotive 492.

In October 2019, locomotive 489, a class K-36 locomotive, went down for a Federal Railroad Administration (FRA) mandated 1,472-day inspection and replacement of the smokebox. However, the work was halted due to the COVID-19 pandemic in March 2020. The work resumed on the 1,472-day inspection and installation of the new smokebox in October 2020. On December 15, 2020, the railroad announced that they would be converting locomotive 489 to burn oil instead of coal. The decision was made "to ensure viability in diverse environmental conditions."[20] The conversion of locomotive 489 was completed in June 2021, just in time for the opening of the 2021 operating season. On August 3, 2022, the railroad announced that parts have been ordered for a second K-36 locomotive, locomotive 487, to be converted to burn oil over the winter of 2022 to 2023.

D&RG 168 after restoration as seen in 2021 at Antonito.

D&RG 163 (a similar engine to D&RG 168) showing what D&RG 168 looked like originally, with diamond stack, box headlight, trim on the domes, and wooden pilot (cowcatcher).

The T-12 No. 168 is a 4-6-0 "Ten Wheeler" type inside frame engine also built by Baldwin Locomotive Works. This is the oldest steam locomotive operated by the railroad. Restoration work on No. 168 was completed in October 2019, and it now continues to operate on occasional special excursions on the C&TSRR. Another engine that operates on the railroad is D&RGW No. 315. No. 315 is a C-18 class inside frame 2-8-0 "Consolidation" type locomotive. It is owned by the Durango Railroad Historical Society, but it is on indefinite loan to the C&TSRR until at least 2025.[18] Restoration work on No. 315 was completed in August 2007, and it continues to operate on occasional special excursions on both the D&SNG and the C&TSRR. After the end of the 2021 operating season in October, No. 315 was temporarily taken out of service for its Federal Railroad Administration (FRA) federally mandated 1,472-day inspection and overhaul, but later returned to service on March 8, 2023.

The C&TSRR owns two class DE General Electric 47-ton center-cab diesel locomotives built in 1943, Nos. 15 and 19, for emergency use when the steam locomotives are inoperative. They are also used for operations outside the normal operating season. Both came from the Oahu Railway and Land Company; No. 19 was purchased by the C&TSRR in 1972 and is currently stationed in Antonito. No. 15 was previously leased by the Georgetown Loop Railroad in the early 1990s and eventually purchased in 2013 where it is currently stationed in Chama.

The C&TSRR owns two ALCO steam-powered rotary snowplows, Rotary OY and Rotary OM. Rotary OM was purchased in the late 1800s by the D&RGW and has served the line ever since. It has not been run since the 1970s because of mechanical issues. Rotary OY was built by ALCO in the 1920s and has served in several places on the line. It was last run in late winter of 2020 to begin the 50th anniversary of the formation of the C&TSRR. There are currently no plans to run the rotary again anytime soon, but it is in good condition and fully functional.[18]

In 2016, D&RGW No. 168 arrived in Antonito from Colorado Springs, Colorado for restoration to operating condition. The engine had been on display for a long time in a public park, but was in good condition. Restoration began in March 2017 and was completed in October 2019. The restoration project was headed up by Cumbres and Toltec Special Projects department and led by Assistant General Manager Efstathios Papas. The project cost $508,000 and spanned 27 months. The railroad intends to use this engine frequently in normal excursion service as much as possible.[18] As of 2023, No. 168 continues to operate in occasional special excursions on the C&TSRR.

The interior of a C&TSRR passenger car No. 504

For passenger services, the C&TSRR operates a mixture of flat roofed and clerestory cars, with interiors corresponding with the railroad's three classes of service: Coach, Deluxe (formerly Tourist class) and Parlor.[21] In 2019, the car shop in Antonito, Colorado, finished the first in a line of new clerestory cars that will serve as standard passenger cars and new Parlor cars. This is part of an effort to retire the older flat roofed cars due to their age.[18] The C&TSRR also operates observation gondolas as well as special coaches configured to accommodate wheelchairs and house concession areas.[22]

A typical C&TSRR train includes:[23]

• 1 K-27, K-36 or K-37 2-8-2 steam locomotive (A second locomotive is normally added, depending on the length of the train)
• 3 Coaches (On some days, extra coaches are added to meet demand)
• 1 ADA/Concession coach
• 1 Observation gondola
• 1 Deluxe class coach
• 1 Parlor class coach

The Cumbres and Toltec Scenic Railroad also owns a varied collection of former D&RGW narrow-gauge freight cars for display and use in nostalgic railtours.[24]