NX bit

The NX bit (no-execute) is a technology used in CPUs to segregate areas of a virtual address space to store either data or processor instructions. An operating system with support for the NX bit may mark certain areas of an address space as non-executable. The processor will then refuse to execute any code residing in these areas of the address space. The general technique, known as executable space protection, also called Write XOR Execute, is used to prevent certain types of malicious software from taking over computers by inserting their code into another program's data storage area and running their own code from within this section; one class of such attacks is known as the buffer overflow attack.

The term NX bit originated with Advanced Micro Devices (AMD), as a marketing term. Intel markets the feature as the XD bit (execute disable). The MIPS architecture refers to the feature as XI bit (execute inhibit). The ARM architecture refers to the feature, which was introduced in ARMv6, as XN (execute never).[1] The term NX bit itself is sometimes used to describe similar technologies in other processors.

Architecture support

x86

x86 processors, since the 80286, included a similar capability implemented at the segment level. However, almost all operating systems for the 80386 and later x86 processors implement the flat memory model, so they cannot use this capability. There was no 'Executable' flag in the page table entry (page descriptor) in those processors, until, to make this capability available to operating systems using the flat memory model, AMD added a "no-execute" or NX bit to the page table entry in its AMD64 architecture, providing a mechanism that can control execution per page rather than per whole segment.

Intel implemented a similar feature in its Itanium (Merced) processor—having IA-64 architecture—in 2001, but did not bring it to the more popular x86 processor families (Pentium, Celeron, Xeon, etc.). In the x86 architecture it was first implemented by AMD, as the NX bit, for use by its AMD64 line of processors, such as the Athlon 64 and Opteron.[2]

After AMD's decision to include this functionality in its AMD64 instruction set, Intel implemented the similar XD bit feature in x86 processors beginning with the Pentium 4 processors based on later iterations of the Prescott core.[3] The NX bit specifically refers to bit number 63 (i.e. the most significant bit) of a 64-bit entry in the page table. If this bit is set to 0, then code can be executed from that page; if set to 1, code cannot be executed from that page, and anything residing there is assumed to be data. It is only available with the long mode (64-bit mode) or legacy Physical Address Extension (PAE) page-table formats, but not x86's original 32-bit page table format because page table entries in that format lack the 64th bit used to disable and enable execution.

Windows XP SP2 and later support Data Execution Prevention (DEP).

ARM

In ARMv6, a new page table entry format was introduced; it includes an "execute never" bit.[1] For ARMv8-A, VMSAv8-64 block and page descriptors, and VMSAv8-32 long-descriptor block and page descriptors, for stage 1 translations have "execute never" bits for both privileged and unprivileged modes, and block and page descriptors for stage 2 translations have a single "execute never" bit(two bits due to ARMv8.2-TTS2UXN feature); VMSAv8-32 short-descriptor translation table descriptors at level 1 have "execute never" bits for both privileged and unprivileged mode and at level 2 have a single "execute never" bit.[4]

Alpha

As of the Fourth Edition of the Alpha Architecture manual, DEC (now HP) Alpha has a Fault on Execute bit in page table entries with the OpenVMS, Tru64 UNIX, and Alpha Linux PALcode.[5]

SPARC

The SPARC Reference MMU for Sun SPARC version 8 has permission values of Read Only, Read/Write, Read/Execute, and Read/Write/Execute in page table entries,[6] although not all SPARC processors have a SPARC Reference MMU.

A SPARC version 9 MMU may provide, but is not required to provide, any combination of read/write/execute permissions.[7] A Translation Table Entry in a Translation Storage Buffer in Oracle SPARC Architecture 2011, Draft D1.0.0 has separate Executable and Writable bits.[8]

PowerPC/Power ISA

Page table entries for IBM PowerPC's hashed page tables have a no-execute page bit.[9] Page table entries for radix-tree page tables in the Power ISA have separate permission bits granting read/write and execute access.[10]

PA-RISC

Translation lookaside buffer (TLB) entries and page table entries in PA-RISC 1.1 and PA-RISC 2.0 support read-only, read/write, read/execute, and read/write/execute pages.[11][12]

Itanium

TLB entries in Itanium support read-only, read/write, read/execute, and read/write/execute pages.[13]

z/Architecture

As of the twelfth edition of the z/Architecture Principles of Operation, z/Architecture processors may support the Instruction-Execution Protection facility, which adds a bit in page table entries that controls whether instructions from a given region, segment, or page can be executed.[14]

See also

References
  1. "ARM Architecture Reference Manual" (PDF). ARM Limited. pp. B4-8,B4-27. Archived from the original (PDF) on 2009-02-06. APX and XN (execute never) bits have been added in VMSAv6 [Virtual Memory System Architecture]
  2. Ted Simpson; Jason Novak (24 May 2017). Hands on Virtual Computing. Cengage Learning. pp. 8–9. ISBN 978-1-337-10193-6.
  3. "Data Execution Prevention" (PDF). Hewlett Packard. 2005. Retrieved 2014-03-23.
  4. "ARM Architecture Reference Manual, ARMv8, for ARMv8-A architecture profile". ARM Limited. pp. D4-1779,D4-1780,D4-1781,G4-4042,G4-4043,G4-4044,G4-4054,G4-4055.
  5. Alpha Architecture Reference Manual (PDF) (Fourth ed.). Compaq Computer. January 2002. pp. 11-5,17-5,22-5.
  6. "The SPARC Architectural Manual, Version 8". SPARC International. p. 244.
  7. The SPARC Architecture Manual, Version 9 (PDF). SPARC International. 1994. F.3.2 Attributes the MMU Associates with Each Mapping, p. 284. ISBN 0-13-825001-4. Archived from the original (PDF) on 2012-01-18.
  8. "Oracle SPARC Architecture 2011, Draft D1.0.0" (PDF). Oracle Corporation. January 12, 2016. p. 452.
  9. PowerPC Operating Environment Architecture Book III, Version 2.01. IBM. December 2003. p. 31.
  10. "Power ISA Version 3.0". IBM. November 30, 2015. p. 1003.
  11. "PA-RISC 1.1 Architecture and Instruction Set Reference Manual, Third Edition" (PDF). Hewlett-Packard. February 1994. p. 3-13. Archived from the original (PDF) on June 7, 2011.
  12. Gerry Kane. "PA-RISC 2.0 Architecture, Chapter 3: Addressing and Access Control" (PDF). Hewlett-Packard. p. 3-14. Archived from the original (PDF) on Jan 9, 2017.
  13. "Intel Itanium Architecture Software Developer's Manual, Volume 2: System Architecture, Revision 2.0". Intel. December 2001. p. 2:46. Archived from the original on Jan 9, 2017.
  14. z/Architecture Principles of Operation (PDF). IBM. September 2017. p. 3-14.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.