V6 PRV engine

In 1966, Peugeot and Renault entered a cooperative agreement to manufacture common components. The first joint subsidiary, La Française de Mécanique (also called Compagnie Française de Mécanique or simply FM) was launched in 1969. The FM factory was built in Douvrin near Lens in northern France. The PRV engines are sometimes referred to as "Douvrin" engines, though that name is more commonly applied to a family of straight-fours produced at the same time.

In 1971, Volvo joined Peugeot and Renault in the creation of the PRV company, a public limited company (plc) in which each of the three manufacturers owned an equal portion. The company originally planned to build V8 engines, although these were later scrapped in favor of a smaller and more fuel-efficient V6.

The PRV engine could be seen as a V8 with two missing cylinders, having a 90-degree angle between cylinder banks, rather than the customary 60, but with crankpins being 120 degrees apart. The Maserati V6 of the Citroën SM followed a remarkably similar pattern of development.

The 1973 energy crisis, and taxes levied against engine displacement greater than 2.8 litres made large V8 engines somewhat undesirable, and expanded the market for smaller displacement engines.

Additionally, Renault needed a V6 engine to fit in its new model, the Renault 30. Renault's internal designation for the PRV was Z-Type.

Machinery for assembling the engines arrived at Douvrin in early June 1973, and buildings for producing the engines were finished in January 1974. The first PRV engines were officially introduced on 3 October 1974 in the Volvo 264. Adoption was swift, and the PRV V6 had been sold in at least five different models by the end of 1975.

In 1984, the first commercially available turbocharged PRV V6 was sold in the Renault 25 V6 Turbo. This was the first to be even-fire with split crankpins, and was the first of the second generation, and indeed EFI engine of any sort. Turbocharged versions went on to be used in the Renault Alpine GTA V6 Turbo (essentially the same engine as the 25 Turbo at 2.5 L (2,458 cc), Renault Alpine A610, and Renault Safrane Bi-turbo – both with 3.0 L (2,963 cc) low compression. Naturally aspirated 2963 cc and 2975 cc versions of both low- and high-compression 3-litre engines appeared in a number of Peugeot, Citroën and Renault cars until 1997.

While Renault were working forced induction into the PRV, Peugeot and Citroën developed their own 24-valve engines as an option in the 605 and XM respectively. The compression remained the same as the Renault 12v, but the pistons differed, as did some of the timing gear, and the heads were re-engineered to allow easier maintenance (the camshaft being fitted from the opposite end for example). This engine was however extremely expensive, and suffered cam wear problems. This was due to the exhaust valves sharing a single lobe, while each inlet valve had its own lobe. This was at least partially solved by the use of ceramic followers as one of a succession of recalls.

Meanwhile, French supercar manufacturer Venturi had been developing their own versions of the PRV. The most powerful versions they built were in the Atlantique 300 at 207 kilowatts (281 PS; 278 bhp) from a single turbocharged 3.0 L 12v, and they successfully raced at the 24 Hours of Le Mans with the 600LM with a twin turbocharged 24v 3.0-litre, pushing out over 450 kilowatts (610 PS; 600 bhp) in race spec, and the road-going spin-off, the 400GT managed 300 kilowatts (408 PS; 402 bhp). This used the low compression bottom end common to the Renault turbo engines, coupled to 24-valve cylinder heads with bespoke rockers and tappets.

Peugeot too allowed a small group of engineers to create a team for endurance racing, and after a few years the team grew to be called WM Peugeot. The ultimate version of the car used a low compression 3.0-litre bottom end coupled to bespoke twin-cam heads. It is the only DOHC PRV. This car still holds the top speed record at 24 Hours of Le Mans set in 1988. By taping over the engine cooling intakes to improve aerodynamics, the team managed to push the car to 407 kilometres per hour (253 mph) on the 5 kilometres (3.1 mi) straight before the engine was destroyed.

Volvo began to withdraw from the PRV consortium in the late 1980s, shifting its powerplant reliance onto in-house inline engines. Peugeot, Renault and Citroën continued using the PRV until 1997.

After producing 970,315 units, production of the PRV V6 was stopped on 15 June 1998.

PRV engine in a DeLorean

The dates following each entry denote the introduction of a PRV V6-equipped models.

• 2458 cc:
  • Alpine GTA (September 1985–February 1991)
  • Renault 25 (1985–1995)
  • Venturi 180/200/210 (1987–1992)
• 2664 cc:
  • Alpine A310 (October 1976–1985)
  • Peugeot 504 coupé/cabriolet (1974–1983)
  • Peugeot 604 (March 1975–1984)
  • Renault 25 (1984–1988)
  • Renault 30 (March 1975–1984)
  • Talbot Tagora (1980–1983)
  • Volvo 260/264/265 (October 1974–1980)
  • Volvo 262C (1977–1980)
  • Volvo 363CS (1977, prototype)
• 2849 cc:
  • Alpine GTA (November 1984 – 1990)
  • DMC DeLorean (1981–1983)
  • Lancia Thema (1984–1992)
  • Panhard ERC
  • Panhard VCR
  • Peugeot 505 (July 1986–1992)
  • Peugeot 604 (1979–1985)
  • Peugeot P4
  • Peugeot Proxima (1986, prototype)
  • Peugeot Oxia (1988, prototype)
  • Renault 25 (1988–1992)
  • Renault Espace II (1991–1996)
  • UMM Alter II (90's)
  • Venturi 160 (1987–1992)
  • Venturi 260 (1989–1996)
  • Volvo 260/264/265 (1980–1982)
  • Volvo 262C (1980–1981)
  • Volvo 760/780 (February 1982–1991)
  • Volvo 960 (rare 1991 models)
• 2963 cc:
  • Alpine A610 (1993–1995)
  • Citroën XM (1993–1997)
  • Peugeot 605 (1990–1995)
  • Renault Espace III (1996–1998)
  • Renault Laguna I (1994–1997)
  • Renault Safrane (1992–1997)
• 2975 cc:
  • Alpine A610 (1991–1993)
  • Citroën XM (1989–1993)
  • Dodge Monaco (1990–1992)
  • Eagle Premier (1988–1992)
  • Peugeot 605 (1990–1995)
  • RJ Racing Helem V6 (1995, modified Renault Sport Spider)
  • UMM Alter II (90's)
  • Venturi 300 (1996–1998)
  • Venturi 400 (1994–1997)

• ALD C289 (1992 24 Hours of Le Mans endurance prototype)
• Alpine A310 Group 4 & B/12
• Alpine A610 GT2
• Chevron B36 (1987 24 Hours of Le Mans endurance prototype)
• Fouquet buggies
• Peugeot 504 V6 Coupé Rallye Group 4
• Peugeot P4 V6 Paris Dakar
• RJ Racing Helem V6
• Schlesser Original
• UMM Alter II
• Venturi 260LM, 400GTR, 500LM and 600LM
• WM P series (1976-1989 24 Hours of Le Mans endurance prototypes, including P80 that finished at 4th place at 1980 24 Hours of Le Mans and the famous P88[lower-alpha 1] that was known for setting the all-time Mulsanne Straight speed trap record of 407 km/h (253 mph) at 1988 24 Hours of Le Mans)[5]
• Ultima Mk1/2/3

The PRV was also the basis for the 90° V6 engine used by Alfa Romeo in the 155 V6 Ti in the 1996 DTM/ITC season from Silverstone onwards.[6] The engines in that series required the use of bank separation angle and cylinder bore spacing from a production based engine, and as a 90° V6 has greater room between banks than a 60° V6 for a more optimal induction system, Alfa Romeo used the PRV as a basis as it had been used in the Lancia Thema, a car which shared its platform with the Alfa Romeo 164, as well as the Fiat Croma and Saab 9000.[7]

Other sources[8] declare that the 90° V6 engine in 1996 Alfa Romeo 155 V6 Ti is based on a 2.6 L V8 from 1970 Alfa Romeo Montreal with 2 cylinders removed, as allowed by the rules, however the FIA homologation documentation shows the homologated production engine was a "2850cm³" capacity "V6" engine. The bore spacing of the Montreal engine was too close to be suitable for the 155 V6 Ti in any case. Limone invented the "Montreal V8" story to throw the press off the scent and to satisfy FIAT management who were unhappy that a non-FIAT group developed engine was being used.[9]

• List of engines used in Chrysler products

Wikimedia Commons has media related to PRV engine.

• Renault Alpine Owners Club provides specific information on Renault Alpine vehicles using the PRV V6.
• ART – Alpine Renault Tuning provides tuning and performance parts for Renault Alpines using the PRV V6 turbo and non-turbo.
• Peugeot PRV Older but useful reference.