Paccar

During World War II, Pacific Car and Foundry's sales grew due to an increased demand for steel used in airplanes, airports, bridges, naval ships, highways and other equipment that helped build America's infrastructure to support the war effort. Pacific Car also sub-contracted for Boeing, building aluminum wing spars for B-17 bombers. During 1942 and 1943 the company also built M4A1 Sherman tanks for the U.S. Army. The company was able to cast almost all the parts for the tanks at its own foundry. Other notable vehicles that were built included the M25 Tank Transporter, known as the "Dragon Wagon," and the T28 Super Heavy Tank.[10] Everett-Pacific Shipbuilding & Dry Dock Company was established in 1942 that built ships and other marine products for the US Navy in Port Gardner Bay in Everett. It was bought by Pacific Car and Foundry in 1944.[15]

PACCAR's history in the 1900s. Clockwise from top: Seattle Car Mfg in 1909, Pacific Car & Foundry's Railroad car in 1950, Kenworth T-10 truck and T28 Super Heavy Tank during WW 2

After World War II ended, Pacific Car was a part of the federal government's Mobilization Planning Program, which meant that it promised to devote 100 percent of its facilities to military production in the event of a national emergency. The company was a prime contractor during the Korean War for producing tanks. Pacific Car chose to subcontract many of the necessary parts, boosting smaller businesses in the state.[10][16][17] In 1945 Pacific Car purchased the Kenworth Motor Truck Corporation which was named after the stockholders Harry Kent and Edgar Worthington. Kenworth had been producing trucks in Seattle since it was incorporated in 1923. During World War II, Kenworth produced trucks, airplane assemblies and sub-assemblies for the United States military. As the war drew to an end Kenworth shifted attention to production of commercial trucks for the postwar market. In 1956 Kenworth lost independent status and became a division directly under Pacific Car and Foundry.[18]

In 1954, Pacific Car acquired the Dart Truck Company of Kansas City, Missouri, and the Peterbilt Motors Company, of Oakland, California. Dart built primarily heavy off-highway dump trucks and specialty vehicles. Peterbilt had been a major competitor with Kenworth, producing many kinds of trucks and buses. Peterbilt operated as Pacific Car's wholly owned subsidiary until 1960, following which it was dissolved and made a division of Pacific Car and Foundry.[19][20][21] Pacific Car's structural steel division made the steel used to build the 50-story Seattle-First National Bank headquarters and to build Seattle's Space Needle in 1961. The firm provided 5,668 steel panels, weighing 58,000 tons, which formed a major part of the load bearing walls for New York City's World Trade Center twin towers. The World Trade Center, like the Sea-First building, bore the building's load on the exterior walls rather than on an interior structural skeleton. The steel panels were shipped by rail from Seattle to New York City on more than 1,600 railcars. Pacific Car was the largest contractor of the 13 steel fabricators that provided steel for the World Trade Center towers.[8][22][23][24]

In 1970 PACCAR created an overseas manufacturing facility at Bayswater, Melbourne Australia producing Kenworth Trucks to serve the growing developing local and S.E Asian Markets which still trade strongly today, with the first completed locally built truck rolling off the production line in March 1971 with the Australian made vehicle exports commencing in 1975. Despite a serious slowdown due to recessions during 1974, PACCAR continued to generate increasing sales throughout the 1970s. PACCAR purchased Wagner Mining Company in 1975, which built underground Mining Vehicles, International Car Company in 1975 and Foden Trucks a British truck manufacturer in 1980.[25][26] Fodens sold trucks in Europe and Africa.[27][28][29] Paccar International was formed in 1972 that promoted exports worldwide.[30][31] Paccar Technical Center was established in 1980 in Mount Vernon, Washington, as a research and testing facility. The facility included test tracks, engine test cells, materials test laboratories and structural laboratories. The tech center conducts an Open House event every April that coincides with the Skagit Valley Tulip Festival.[32][33] In 1983 the International Car Co Division in Kenton Ohio, which had been acquired on December 1, 1975,[34] was disbanded.[35] In 1983 the Paccar Rail Leasing Inc subsidiary in Renton WA and the RAILEASE Inc subsidiary in Bellevue WA were disbanded.[36] In 1986 the Pacific Car and Foundry subsidiary in Renton WA was renamed to Paccar Defense Systems Division.[37] In 1984 PACCAR posted record sales in its history of $2.25 billion.[38][39]

In the mid-1980s, PACCAR share of Class 8 trucks dropped to about 18% owing to aggressive competition from Freightliner Trucks, which is a subsidiary of Daimler AG and the merged operations of Volvo White and General. This competition forced PACCAR to close its Kenworth assembly plant in Kansas City in April, 1986 and its Peterbilt plant in Newark, California, the following October.[40] PACCAR acquired Trico Industries in 1986 which was a manufacturer of oil exploration equipment based in Gardena, California, for $65 million in order to reduce its dependence on the Class 8 Truck market.[41][42] During the mid-80's PACCAR was negotiating with the Rover Group, for acquiring its British Leyland truck division. However, Rover management decided to sell the truck division to DAF Trucks which was a Dutch automotive concern. Its Dart Truck Company and Wagner Mining Equipment Company were sold in 1984 and 1989 in order to remain profitable.[43][44] In 1987, PACCAR acquired Al's Auto Supply and Grand Auto Incorporated which led to its entry into the automotive parts & accessories retail market that gave the company greater ability to weather periods of national economic downturn.[45][46][47]

Paccar Parts was created in 1992 in Renton, Washington. The building it was housed in occupied part of the company's historic Pacific Car and Foundry site. In the same year, PACCAR purchased a 21 percent stake in Wood Group ESP which added to its oil field equipment manufacturing.[48][49][50] In 1993, PACCAR acquired a line of winches from heavy equipment manufacturer Caterpillar. The same year it brought a new plant in Washington on line to help meet the increased demand for trucks. In 1994 the company began selling in New Zealand for the first time and entered new countries in Asia and Central and South America. The company made its Mexican joint venture VILPAC, S.A., a wholly owned subsidiary in 1995. PACCAR's Winch division was one of the world's largest manufacturer of industrial winches by 1994.[51][52]

Paccar International marketed trucks to more than 40 countries, and was one of the largest exporters of capital goods in North America by 1995. Kenworth truck factory in Renton, Washington, was opened on June 4, 1993.[53] In 1997 Mark Pigott assumed PACCAR's presidency as Charles Pigott retired in 1997.[54] In 1996 & 1998 the company spent $543 million to acquire DAF Trucks N.V. based in the Netherlands and Leyland Trucks Ltd., an acquisition it first pursued back in the mid-1980s. These acquisitions were funded in part by the sale of Trico Industries to EVI in 1997.[55][56][57][58] Financial and leasing subsidiaries also performed well in the late 1990s. Also, in 1998 PACCAR acquired UK-based Leyland Trucks for its light and medium truck (6 to 44 metric tons) design and manufacture capability. With its Peterbilt, Kenworth, and DAF nameplates, PACCAR ranks second in production numbers in the United States and third in production numbers globally in "big rig" truck production; behind Daimler AG in the US market. Other Major heavy-truck competitors include Navistar International and AB Volvo.[59][60][61][62]