Pigment

In 2006, around 7.4 million tons of inorganic, organic, and special pigments were marketed worldwide.[3] According to an April 2018 report by Bloomberg Businessweek, the estimated value of the pigment industry globally is $30 billion. The value of titanium dioxide – used to enhance the white brightness of many products – was placed at $13.2 billion per year, while the color Ferrari red is valued at $300 million each year.[4]

A wide variety of wavelengths (colors) encounter a pigment. This pigment absorbs red and green light, but reflects blue—giving the substance a blue-colored appearance.

Like all materials, the color of pigments arises because they absorb only certain wavelengths of visible light. The bonding properties of the material determine the wavelength and efficiency of light absorption.[5] Light of other wavelengths are reflected or scattered. The reflected light spectrum defines the color that we observe.

The appearance of pigments is sensitive to the source light. Sunlight has a high color temperature and a fairly uniform spectrum. Sunlight is considered a standard for white light. Artificial light sources are less uniform.

Color spaces used to represent colors numerically must specify their light source. Lab color measurements, unless otherwise noted, assume that the measurement was recorded under a D65 light source, or "Daylight 6500 K", which is roughly the color temperature of sunlight.

Sunlight encounters Rosco R80 "Primary Blue" pigment. The product of the source spectrum and the reflectance spectrum of the pigment results in the final spectrum, and the appearance of blue.

Other properties of a color, such as its saturation or lightness, may be determined by the other substances that accompany pigments. Binders and fillers can affect the color.

Minerals have been used as colorants since prehistoric times.[6] Early humans used paint for aesthetic purposes such as body decoration. Pigments and paint grinding equipment believed to be between 350,000 and 400,000 years old have been reported in a cave at Twin Rivers, near Lusaka, Zambia. Ochre, iron oxide, was the first color of paint.[7] A favored blue pigment was derived from lapis lazuli. Pigments based on minerals and clays often bear the name of the city or region where they were originally mined. Raw sienna and burnt sienna came from Siena, Italy, while raw umber and burnt umber came from Umbria. These pigments were among the easiest to synthesize, and chemists created modern colors based on the originals. These were more consistent than colors mined from the original ore bodies, but the place names remained. Also found in many Paleolithic and Neolithic cave paintings are Red Ochre, anhydrous Fe₂O₃, and the hydrated Yellow Ochre (Fe₂O₃^.H₂O).[8] Charcoal—or carbon black—has also been used as a black pigment since prehistoric times.[8]

The first known synthetic pigment was Egyptian blue, which is first attested on an alabaster bowl in Egypt dated to Naqada III (circa 3250 BC).[9][10] Egyptian blue (blue frit), calcium copper silicate CaCuSi₄O₁₀, made by heating a mixture of quartz sand, lime, a flux and a copper source, such as malachite.[11] Already invented in the Predynastic Period of Egypt, its use became widespread by the 4th Dynasty.[12] It was the blue pigment par excellence of Roman antiquity; its art technological traces vanished in the course of the Middle Ages until its rediscovery in the context of the Egyptian campaign and the excavations in Pompeii and Herculaneum.[13] Later premodern synthetic pigments include white lead (basic lead carbonate, (PbCO₃)₂Pb(OH)₂),[14] vermilion, verdigris, and lead-tin yellow. Vermilion, a mercury sulfide, was originally made by grinding a powder of natural cinnabar. From the 17th century on, it was also synthesized from the elements.[15] It was favored by old masters such as Titian. Indian yellow was once produced by collecting the urine of cattle that had been fed only mango leaves.[16] Dutch and Flemish painters of the 17th and 18th centuries favored it for its luminescent qualities, and often used it to represent sunlight. Since mango leaves are nutritionally inadequate for cattle, the practice of harvesting Indian yellow was eventually declared to be inhumane.[16] Modern hues of Indian yellow are made from synthetic pigments. Vermillion has been partially replaced in by cadmium reds.

Because of the cost of lapis lazuli, substitutes were often used. Prussian blue, the oldest modern synthetic pigment, was discovered by accident in 1704.[17] By the early 19th century, synthetic and metallic blue pigments included French ultramarine, a synthetic form of lapis lazuli. Ultramarine was manufactured by treating aluminium silicate with sulfur. Various forms of cobalt blue and Cerulean blue were also introduced. In the early 20th century, Phthalo Blue, a synthetic metallo-organic pigment was prepared. At the same time, Royal Blue, another name once given to tints produced from lapis lazuli, has evolved to signify a much lighter and brighter color, and is usually mixed from Phthalo Blue and titanium dioxide, or from inexpensive synthetic blue dyes.

The discovery in 1856 of mauveine, the first aniline dyes, was a forerunner for the development of hundreds of synthetic dyes and pigments like azo and diazo compounds. These dyes ushered in the flourishing of organic chemistry, including systematic designs of colorants. The development of organic chemistry diminished the dependence on inorganic pigments.[18]

• Paintings illustrating advances in pigments
• 
  The Milkmaid by Johannes Vermeer (c. 1658). Vermeer was lavish in his choice of expensive pigments, including lead-tin yellow, natural ultramarine, and madder lake, as shown in the vibrant painting.[19]
• 
  Titian used the historic pigment vermilion to create the reds in the oil painting of Assunta, completed c. 1518.
• 
  Miracle of the Slave by Tintoretto (c. 1548). The son of a master dyer, Tintoretto used Carmine Red Lake pigment, derived from the cochineal insect, to achieve dramatic color effects.
• 
  Self Portrait by Paul Cézanne. Working in the late 19th century, Cézanne had a much broader palette of colors than his predecessors.

Natural ultramarine pigment in powdered form

Synthetic ultramarine pigment is chemically identical to natural ultramarine

Before the development of synthetic pigments, and the refinement of techniques for extracting mineral pigments, batches of color were often inconsistent. With the development of a modern color industry, manufacturers and professionals have cooperated to create international standards for identifying, producing, measuring, and testing colors.

First published in 1905, the Munsell color system became the foundation for a series of color models, providing objective methods for the measurement of color. The Munsell system describes a color in three dimensions, hue, value (lightness), and chroma (color purity), where chroma is the difference from gray at a given hue and value.

By the middle 20th century, standardized methods for pigment chemistry were available, part of an international movement to create such standards in industry. The International Organization for Standardization (ISO) develops technical standards for the manufacture of pigments and dyes. ISO standards define various industrial and chemical properties, and how to test for them. The principal ISO standards that relate to all pigments are as follows:

• ISO-787 General methods of test for pigments and extenders.
• ISO-8780 Methods of dispersion for assessment of dispersion characteristics.

Other ISO standards pertain to particular classes or categories of pigments, based on their chemical composition, such as ultramarine pigments, titanium dioxide, iron oxide pigments, and so forth.

Many manufacturers of paints, inks, textiles, plastics, and colors have voluntarily adopted the Colour Index International (CII) as a standard for identifying the pigments that they use in manufacturing particular colors. First published in 1925—and now published jointly on the web by the Society of Dyers and Colourists (United Kingdom) and the American Association of Textile Chemists and Colorists (USA)—this index is recognized internationally as the authoritative reference on colorants. It encompasses more than 27,000 products under more than 13,000 generic color index names.

In the CII schema, each pigment has a generic index number that identifies it chemically, regardless of proprietary and historic names. For example, Phthalocyanine Blue BN has been known by a variety of generic and proprietary names since its discovery in the 1930s. In much of Europe, phthalocyanine blue is better known as Helio Blue, or by a proprietary name such as Winsor Blue. An American paint manufacturer, Grumbacher, registered an alternate spelling (Thanos Blue) as a trademark. Colour Index International resolves all these conflicting historic, generic, and proprietary names so that manufacturers and consumers can identify the pigment (or dye) used in a particular color product. In the CII, all phthalocyanine blue pigments are designated by a generic color index number as either PB15 or PB16, short for pigment blue 15 and pigment blue 16; these two numbers reflect slight variations in molecular structure, which produce a slightly more greenish or reddish blue.

The following are some of the attributes of pigments that determine their suitability for particular manufacturing processes and applications:

• Lightfastness and sensitivity for damage from ultraviolet light
• Heat stability
• Toxicity
• Tinting strength
• Staining
• Dispersion (which can be measured with a Hegman gauge)
• Opacity or transparency
• Resistance to alkalis and acids
• Reactions and interactions between pigments

Swatches are used to communicate colors accurately. The types of swatches are dictated by the media, i.e., printing, computers, plastics, and textiles. Generally, the medium that offers the broadest gamut of color shades is widely used across diverse media.

In biology, a pigment is any colored material of plant or animal cells. Many biological structures, such as skin, eyes, fur, and hair contain pigments (such as melanin). Animal skin coloration often comes about through specialized cells called chromatophores, which animals such as the octopus and chameleon can control to vary the animal's color. Many conditions affect the levels or nature of pigments in plant, animal, some protista, or fungus cells. For instance, the disorder called albinism affects the level of melanin production in animals.

Pigmentation in organisms serves many biological purposes, including camouflage, mimicry, aposematism (warning), sexual selection and other forms of signalling, photosynthesis (in plants), and basic physical purposes such as protection from sunburn.

Pigment color differs from structural color in that pigment color is the same for all viewing angles, whereas structural color is the result of selective reflection or iridescence, usually because of multilayer structures. For example, butterfly wings typically contain structural color, although many butterflies have cells that contain pigment as well.

Phthalo Blue

• Aluminium pigment: aluminum powder[23]
• Barium: barium white (lithopone)
• Cadmium pigments: cadmium yellow, cadmium red, cadmium green, cadmium orange, cadmium sulfoselenide
• Carbon pigments: carbon black (including vine black, lamp black), ivory black (bone charcoal)
• Chromium pigments: chrome yellow and chrome green (viridian)
• Cobalt pigments: cobalt violet, cobalt blue, cerulean blue, aureolin (cobalt yellow)
• Copper pigments: azurite, Han purple, Han blue, Egyptian blue, malachite, Paris green, Phthalocyanine Blue BN, Phthalocyanine Green G, verdigris
• Iron oxide pigments: sanguine, caput mortuum, oxide red, red ochre, yellow ochre, Venetian red, Prussian blue, raw sienna, burnt sienna, raw umber, burnt umber
• Lead pigments: lead white, Naples yellow, red lead, lead-tin yellow
• Manganese pigments: manganese violet, YInMn blue
• Mercury pigments: vermilion
• Sulfur pigments: ultramarine, ultramarine green shade, lapis lazuli
• Titanium pigments: titanium yellow, titanium white, titanium black
• Zinc pigments: zinc white, zinc ferrite, zinc yellow

• Blue pigments
• Lake pigment
• List of Stone Age art
• Red pigments
• Rock art
• Subtractive color

• Ball, Philip (2002). Bright Earth: Art and the Invention of Color. Farrar, Straus and Giroux. ISBN 0-374-11679-2.
• Doerner, Max (1984). The Materials of the Artist and Their Use in Painting: With Notes on the Techniques of the Old Masters, Revised Edition. Harcourt. ISBN 0-15-657716-X.
• Finlay, Victoria (2003). Color: A Natural History of the Palette. Random House. ISBN 0-8129-7142-6.
• Gage, John (1999). Color and Culture: Practice and Meaning from Antiquity to Abstraction. University of California Press. ISBN 0-520-22225-3.
• Meyer, Ralph (1991). The Artist's Handbook of Materials and Techniques, Fifth Edition. Viking. ISBN 0-670-83701-6.
• Feller, R. L., ed. (1986). Artists' Pigments. A Handbook of Their History and Characteristics, Vol. 1. London: Cambridge University Press.
• Roy, A., ed. (1993). Artists' Pigments. A Handbook of Their History and Characteristics, Vol. 2. Oxford University Press.
• Fitzhugh, E. W., ed. (1997). Artists' Pigments. A Handbook of Their History and Characteristics, Vol. 3. Oxford University Press.
• Berrie, B., ed. (2007). Artists' Pigments. A Handbook of Their History and Characteristics, Vol. 4. Archetype Books.

Wikimedia Commons has media related to Pigments.

• Pigments through the ages
• ColourLex Pigment Lexicon
• Sarah Lowengard,The Creation of Color in Eighteenth-century Europe, Columbia University Press, 2006
• Alchemy's Rainbow: Pigment Science and the Art of Conservation on YouTube, Chemical Heritage Foundation
• Poisons and Pigments: A Talk with Art Historian Elisabeth Berry-Drago on YouTube, Chemical Heritage Foundation
• The Quest for the Next Billion-Dollar Color