Fictitious force

Many problems require use of noninertial reference frames, for example, those involving satellites[28][29] and particle accelerators.[30] Figure 2 shows a particle with mass m and position vector x_A(t) in a particular inertial frame A. Consider a non-inertial frame B whose origin relative to the inertial one is given by X_AB(t). Let the position of the particle in frame B be x_B(t). What is the force on the particle as expressed in the coordinate system of frame B?[31][32]

To answer this question, let the coordinate axis in B be represented by unit vectors u_j with j any of { 1, 2, 3 } for the three coordinate axes. Then

${\displaystyle \mathbf {x} _{\mathrm {B} }=\sum _{j=1}^{3}x_{j}\mathbf {u} _{j}\,.}$

The interpretation of this equation is that x_B is the vector displacement of the particle as expressed in terms of the coordinates in frame B at the time t. From frame A the particle is located at:

${\displaystyle \mathbf {x} _{\mathrm {A} }=\mathbf {X} _{\mathrm {AB} }+\sum _{j=1}^{3}x_{j}\mathbf {u} _{j}\,.}$

As an aside, the unit vectors { u_j } cannot change magnitude, so derivatives of these vectors express only rotation of the coordinate system B. On the other hand, vector X_AB simply locates the origin of frame B relative to frame A, and so cannot include rotation of frame B.

Taking a time derivative, the velocity of the particle is:

${\displaystyle {\frac {d\mathbf {x} _{\mathrm {A} }}{dt}}={\frac {d\mathbf {X} _{\mathrm {AB} }}{dt}}+\sum _{j=1}^{3}{\frac {dx_{j}}{dt}}\mathbf {u} _{j}+\sum _{j=1}^{3}x_{j}{\frac {d\mathbf {u} _{j}}{dt}}\,.}$

The second term summation is the velocity of the particle, say v_B as measured in frame B. That is:

${\displaystyle {\frac {d\mathbf {x} _{\mathrm {A} }}{dt}}=\mathbf {v} _{\mathrm {AB} }+\mathbf {v} _{\mathrm {B} }+\sum _{j=1}^{3}x_{j}{\frac {d\mathbf {u} _{j}}{dt}}.}$

The interpretation of this equation is that the velocity of the particle seen by observers in frame A consists of what observers in frame B call the velocity, namely v_B, plus two extra terms related to the rate of change of the frame-B coordinate axes. One of these is simply the velocity of the moving origin v_AB. The other is a contribution to velocity due to the fact that different locations in the non-inertial frame have different apparent velocities due to the rotation of the frame; a point seen from a rotating frame has a rotational component of velocity that is greater the further the point is from the origin.

To find the acceleration, another time differentiation provides:

${\displaystyle {\frac {d^{2}\mathbf {x} _{\mathrm {A} }}{dt^{2}}}=\mathbf {a} _{\mathrm {AB} }+{\frac {d\mathbf {v} _{\mathrm {B} }}{dt}}+\sum _{j=1}^{3}{\frac {dx_{j}}{dt}}{\frac {d\mathbf {u} _{j}}{dt}}+\sum _{j=1}^{3}x_{j}{\frac {d^{2}\mathbf {u} _{j}}{dt^{2}}}.}$

Using the same formula already used for the time derivative of x_B, the velocity derivative on the right is:

${\displaystyle {\frac {d\mathbf {v} _{\mathrm {B} }}{dt}}=\sum _{j=1}^{3}{\frac {dv_{j}}{dt}}\mathbf {u} _{j}+\sum _{j=1}^{3}v_{j}{\frac {d\mathbf {u} _{j}}{dt}}=\mathbf {a} _{\mathrm {B} }+\sum _{j=1}^{3}v_{j}{\frac {d\mathbf {u} _{j}}{dt}}.}$

Consequently,

$${\displaystyle {\frac {d^{2}\mathbf {x} _{\mathrm {A} }}{dt^{2}}}=\mathbf {a} _{\mathrm {AB} }+\mathbf {a} _{\mathrm {B} }+2\ \sum _{j=1}^{3}v_{j}{\frac {d\mathbf {u} _{j}}{dt}}+\sum _{j=1}^{3}x_{j}{\frac {d^{2}\mathbf {u} _{j}}{dt^{2}}}.}$$

(1)

The interpretation of this equation is as follows: the acceleration of the particle in frame A consists of what observers in frame B call the particle acceleration a_B, but in addition, there are three acceleration terms related to the movement of the frame-B coordinate axes: one term related to the acceleration of the origin of frame B, namely a_AB, and two terms related to the rotation of frame B. Consequently, observers in B will see the particle motion as possessing "extra" acceleration, which they will attribute to "forces" acting on the particle, but which observers in A say are "fictitious" forces arising simply because observers in B do not recognize the non-inertial nature of frame B.

The factor of two in the Coriolis force arises from two equal contributions: (i) the apparent change of an inertially constant velocity with time because rotation makes the direction of the velocity seem to change (a dv_B/dt term) and (ii) an apparent change in the velocity of an object when its position changes, putting it nearer to or further from the axis of rotation (the change in ${\textstyle \sum x_{j}\,d\mathbf {u} _{j}/dt}$ due to change in x _j ).

To put matters in terms of forces, the accelerations are multiplied by the particle mass:

${\displaystyle \mathbf {F} _{\mathrm {A} }=\mathbf {F} _{\mathrm {B} }+m\mathbf {a} _{\mathrm {AB} }+2m\sum _{j=1}^{3}v_{j}{\frac {d\mathbf {u} _{j}}{dt}}+m\sum _{j=1}^{3}x_{j}{\frac {d^{2}\mathbf {u} _{j}}{dt^{2}}}\ .}$

The force observed in frame B, F_B = ma_B is related to the actual force on the particle, F_A, by

${\displaystyle \mathbf {F} _{\mathrm {B} }=\mathbf {F} _{\mathrm {A} }+\mathbf {F} _{\mathrm {fictitious} },}$

where:

${\displaystyle \mathbf {F} _{\mathrm {fictitious} }=-m\mathbf {a} _{\mathrm {AB} }-2m\sum _{j=1}^{3}v_{j}{\frac {d\mathbf {u} _{j}}{dt}}-m\sum _{j=1}^{3}x_{j}{\frac {d^{2}\mathbf {u} _{j}}{dt^{2}}}\,.}$

Thus, problems may be solved in frame B by assuming that Newton's second law holds (with respect to quantities in that frame) and treating F_fictitious as an additional force.[18][33][34]

Below are a number of examples applying this result for fictitious forces. More examples can be found in the article on centrifugal force.

A common situation in which noninertial reference frames are useful is when the reference frame is rotating. Because such rotational motion is non-inertial, due to the acceleration present in any rotational motion, a fictitious force can always be invoked by using a rotational frame of reference. Despite this complication, the use of fictitious forces often simplifies the calculations involved.

To derive expressions for the fictitious forces, derivatives are needed for the apparent time rate of change of vectors that take into account time-variation of the coordinate axes. If the rotation of frame 'B' is represented by a vector Ω pointed along the axis of rotation with the orientation given by the right-hand rule, and with magnitude given by

${\displaystyle |{\boldsymbol {\Omega }}|={\frac {d\theta }{dt}}=\omega (t),}$

then the time derivative of any of the three unit vectors describing frame B is[33][35]

${\displaystyle {\frac {d\mathbf {u} _{j}(t)}{dt}}={\boldsymbol {\Omega }}\times \mathbf {u} _{j}(t),}$

and

${\displaystyle {\frac {d^{2}\mathbf {u} _{j}(t)}{dt^{2}}}={\frac {d{\boldsymbol {\Omega }}}{dt}}\times \mathbf {u} _{j}+{\boldsymbol {\Omega }}\times {\frac {d\mathbf {u} _{j}(t)}{dt}}={\frac {d{\boldsymbol {\Omega }}}{dt}}\times \mathbf {u} _{j}+{\boldsymbol {\Omega }}\times \left[{\boldsymbol {\Omega }}\times \mathbf {u} _{j}(t)\right],}$

as is verified using the properties of the vector cross product. These derivative formulas now are applied to the relationship between acceleration in an inertial frame, and that in a coordinate frame rotating with time-varying angular velocity ω(t). From the previous section, where subscript A refers to the inertial frame and B to the rotating frame, setting a_AB = 0 to remove any translational acceleration, and focusing on only rotational properties (see Eq. 1):

${\displaystyle {\frac {d^{2}\mathbf {x} _{\mathrm {A} }}{dt^{2}}}=\mathbf {a} _{\mathrm {B} }+2\sum _{j=1}^{3}v_{j}\ {\frac {d\mathbf {u} _{j}}{dt}}+\sum _{j=1}^{3}x_{j}{\frac {d^{2}\mathbf {u} _{j}}{dt^{2}}},}$

${\displaystyle {\begin{aligned}\mathbf {a} _{\mathrm {A} }&=\mathbf {a} _{\mathrm {B} }+\ 2\sum _{j=1}^{3}v_{j}{\boldsymbol {\Omega }}\times \mathbf {u} _{j}(t)+\sum _{j=1}^{3}x_{j}{\frac {d{\boldsymbol {\Omega }}}{dt}}\times \mathbf {u} _{j}\ +\sum _{j=1}^{3}x_{j}{\boldsymbol {\Omega }}\times \left[{\boldsymbol {\Omega }}\times \mathbf {u} _{j}(t)\right]\\&=\mathbf {a} _{\mathrm {B} }+2{\boldsymbol {\Omega }}\times \sum _{j=1}^{3}v_{j}\mathbf {u} _{j}(t)+{\frac {d{\boldsymbol {\Omega }}}{dt}}\times \sum _{j=1}^{3}x_{j}\mathbf {u} _{j}+{\boldsymbol {\Omega }}\times \left[{\boldsymbol {\Omega }}\times \sum _{j=1}^{3}x_{j}\mathbf {u} _{j}(t)\right].\end{aligned}}}$

Collecting terms, the result is the so-called acceleration transformation formula:[36]

${\displaystyle \mathbf {a} _{\mathrm {A} }=\mathbf {a} _{\mathrm {B} }+2{\boldsymbol {\Omega }}\times \mathbf {v} _{\mathrm {B} }+{\frac {d{\boldsymbol {\Omega }}}{dt}}\times \mathbf {x} _{\mathrm {B} }+{\boldsymbol {\Omega }}\times \left({\boldsymbol {\Omega }}\times \mathbf {x} _{\mathrm {B} }\right)\,.}$

The physical acceleration a_A due to what observers in the inertial frame A call real external forces on the object is, therefore, not simply the acceleration a_B seen by observers in the rotational frame B, but has several additional geometric acceleration terms associated with the rotation of B. As seen in the rotational frame, the acceleration a_B of the particle is given by rearrangement of the above equation as:

${\displaystyle \mathbf {a} _{\mathrm {B} }=\mathbf {a} _{\mathrm {A} }-2{\boldsymbol {\Omega }}\times \mathbf {v} _{\mathrm {B} }-{\boldsymbol {\Omega }}\times ({\boldsymbol {\Omega }}\times \mathbf {x} _{\mathrm {B} })-{\frac {d{\boldsymbol {\Omega }}}{dt}}\times \mathbf {x} _{\mathrm {B} }.}$

The net force upon the object according to observers in the rotating frame is F_B = ma_B. If their observations are to result in the correct force on the object when using Newton's laws, they must consider that the additional force F_fict is present, so the end result is F_B = F_A + F_fict. Thus, the fictitious force used by observers in B to get the correct behaviour of the object from Newton's laws equals:

${\displaystyle \mathbf {F} _{\mathrm {fict} }=-2m{\boldsymbol {\Omega }}\times \mathbf {v} _{\mathrm {B} }-m{\boldsymbol {\Omega }}\times ({\boldsymbol {\Omega }}\times \mathbf {x} _{\mathrm {B} })-m{\frac {d{\boldsymbol {\Omega }}}{dt}}\times \mathbf {x} _{\mathrm {B} }.}$

Here, the first term is the Coriolis force,[37] the second term is the centrifugal force,[38] and the third term is the Euler force.[39][40]

Figure 3: An orbiting but fixed orientation coordinate system B, shown at three different times. The unit vectors u_j, j = 1, 2, 3 do not rotate, but maintain a fixed orientation, while the origin of the coordinate system B moves at constant angular rate ω about the fixed axis Ω. Axis Ω passes through the origin of inertial frame A, so the origin of frame B is a fixed distance R from the origin of inertial frame A.

As a related example, suppose the moving coordinate system B rotates with a constant angular speed ω in a circle of radius R about the fixed origin of inertial frame A, but maintains its coordinate axes fixed in orientation, as in Figure 3. The acceleration of an observed body is now (see Eq. 1):

${\displaystyle {\begin{aligned}{\frac {d^{2}\mathbf {x} _{A}}{dt^{2}}}&=\mathbf {a} _{AB}+\mathbf {a} _{B}+2\ \sum _{j=1}^{3}v_{j}\ {\frac {d\mathbf {u} _{j}}{dt}}+\sum _{j=1}^{3}x_{j}\ {\frac {d^{2}\mathbf {u} _{j}}{dt^{2}}}\\&=\mathbf {a} _{AB}\ +\mathbf {a} _{B}\ ,\end{aligned}}}$

where the summations are zero inasmuch as the unit vectors have no time dependence. The origin of the system B is located according to frame A at:

${\displaystyle \mathbf {X} _{AB}=R\left(\cos(\omega t),\ \sin(\omega t)\right)\ ,}$

leading to a velocity of the origin of frame B as:

${\displaystyle \mathbf {v} _{AB}={\frac {d}{dt}}\mathbf {X} _{AB}=\mathbf {\Omega \times X} _{AB}\ ,}$

leading to an acceleration of the origin of B given by:

${\displaystyle \mathbf {a} _{AB}={\frac {d^{2}}{dt^{2}}}\mathbf {X} _{AB}=\mathbf {\Omega \ \times } \left(\mathbf {\Omega \times X} _{AB}\right)=-\omega ^{2}\mathbf {X} _{AB}\,.}$

Because the first term, which is

$${\displaystyle \mathbf {\Omega \ \times } \left(\mathbf {\Omega \times X} _{AB}\right)\,,}$$

is of the same form as the normal centrifugal force expression:

$${\displaystyle {\boldsymbol {\Omega }}\times \left({\boldsymbol {\Omega }}\times \mathbf {x} _{B}\right)\,,}$$

it is a natural extension of standard terminology (although there is no standard terminology for this case) to call this term a "centrifugal force". Whatever terminology is adopted, the observers in frame B must introduce a fictitious force, this time due to the acceleration from the orbital motion of their entire coordinate frame, that is radially outward away from the centre of rotation of the origin of their coordinate system:

${\displaystyle \mathbf {F} _{\mathrm {fict} }=m\omega ^{2}\mathbf {X} _{AB}\,,}$

and of magnitude:

${\displaystyle |\mathbf {F} _{\mathrm {fict} }|=m\omega ^{2}R\,.}$

This "centrifugal force" has differences from the case of a rotating frame. In the rotating frame the centrifugal force is related to the distance of the object from the origin of frame B, while in the case of an orbiting frame, the centrifugal force is independent of the distance of the object from the origin of frame B, but instead depends upon the distance of the origin of frame B from its centre of rotation, resulting in the same centrifugal fictitious force for all objects observed in frame B.

Figure 4: An orbiting coordinate system B similar to Figure 3, but in which unit vectors u_j, j = 1, 2, 3 rotate to face the rotational axis, while the origin of the coordinate system B moves at constant angular rate ω about the fixed axis Ω.

As a combination example, Figure 4 shows a coordinate system B that orbits inertial frame A as in Figure 3, but the coordinate axes in frame B turn so unit vector u₁ always points toward the centre of rotation. This example might apply to a test tube in a centrifuge, where vector u₁ points along the axis of the tube toward its opening at its top. It also resembles the Earth–Moon system, where the Moon always presents the same face to the Earth.[41] In this example, unit vector u₃ retains a fixed orientation, while vectors u₁, u₂ rotate at the same rate as the origin of coordinates. That is,

${\displaystyle \mathbf {u} _{1}=(-\cos \omega t,\ -\sin \omega t)\$ ;\ }  ${\displaystyle \mathbf {u} _{2}=(\sin \omega t,\ -\cos \omega t)\,.}$

${\displaystyle {\frac {d}{dt}}\mathbf {u} _{1}=\mathbf {\Omega \times u_{1}} =\omega \mathbf {u} _{2}\$ ;}  ${\displaystyle \ {\frac {d}{dt}}\mathbf {u} _{2}=\mathbf {\Omega \times u_{2}} =-\omega \mathbf {u} _{1}\ \ .}$

Hence, the acceleration of a moving object is expressed as (see Eq. 1):

${\displaystyle {\begin{aligned}{\frac {d^{2}\mathbf {x} _{A}}{dt^{2}}}&=\mathbf {a} _{AB}+\mathbf {a} _{B}+2\ \sum _{j=1}^{3}v_{j}\ {\frac {d\mathbf {u} _{j}}{dt}}+\ \sum _{j=1}^{3}x_{j}\ {\frac {d^{2}\mathbf {u} _{j}}{dt^{2}}}\\&=\mathbf {\Omega \ \times } \left(\mathbf {\Omega \times X} _{AB}\right)+\mathbf {a} _{B}+2\ \sum _{j=1}^{3}v_{j}\ \mathbf {\Omega \times u_{j}} \ +\ \sum _{j=1}^{3}x_{j}\ {\boldsymbol {\Omega }}\times \left({\boldsymbol {\Omega }}\times \mathbf {u} _{j}\right)\\&=\mathbf {\Omega \ \times } \left(\mathbf {\Omega \times X} _{AB}\right)+\mathbf {a} _{B}+2\ {\boldsymbol {\Omega }}\times \mathbf {v} _{B}\ \ +\ {\boldsymbol {\Omega }}\times \left({\boldsymbol {\Omega }}\times \mathbf {x} _{B}\right)\\&=\mathbf {\Omega \ \times } \left(\mathbf {\Omega \times } (\mathbf {X} _{AB}+\mathbf {x} _{B})\right)+\mathbf {a} _{B}+2\ {\boldsymbol {\Omega }}\times \mathbf {v} _{B}\ \,,\end{aligned}}}$

where the angular acceleration term is zero for the constant rate of rotation. Because the first term, which is

$${\displaystyle \mathbf {\Omega \ \times } \left(\mathbf {\Omega \times } (\mathbf {X} _{AB}+\mathbf {x} _{B})\right)\,,}$$

is of the same form as the normal centrifugal force expression:

$${\displaystyle {\boldsymbol {\Omega }}\times \left({\boldsymbol {\Omega }}\times \mathbf {x} _{B}\right)\,,}$$

it is a natural extension of standard terminology (although there is no standard terminology for this case) to call this term the "centrifugal force". Applying this terminology to the example of a tube in a centrifuge, if the tube is far enough from the center of rotation, |X_AB| = R ≫ |x_B|, all the matter in the test tube sees the same acceleration (the same centrifugal force). Thus, in this case, the fictitious force is primarily a uniform centrifugal force along the axis of the tube, away from the centre of rotation, with a value |F_fict| = ω² R, where R is the distance of the matter in the tube from the centre of the centrifuge. It is the standard specification of a centrifuge to use the "effective" radius of the centrifuge to estimate its ability to provide centrifugal force. Thus, the first estimate of centrifugal force in a centrifuge can be based upon the distance of the tubes from the centre of rotation, and corrections applied if needed.[42][43]

Also, the test tube confines motion to the direction down the length of the tube, so v_B is opposite to u₁ and the Coriolis force is opposite to u₂, that is, against the wall of the tube. If the tube is spun for a long enough time, the velocity v_B drops to zero as the matter comes to an equilibrium distribution. For more details, see the articles on sedimentation and the Lamm equation.

A related problem is that of centrifugal forces for the Earth–Moon–Sun system, where three rotations appear: the daily rotation of the Earth about its axis, the lunar-month rotation of the Earth–Moon system about its centre of mass, and the annual revolution of the Earth–Moon system about the Sun. These three motions influence the tides.[44]

Figure 5: Crossing a rotating carousel walking at a constant speed from the centre of the carousel to its edge, a spiral is traced out in the inertial frame, while a simple straight radial path is seen in the frame of the carousel.

Figure 5 shows another example comparing the observations of an inertial observer with those of an observer on a rotating carousel.[45] The carousel rotates at a constant angular velocity represented by the vector Ω with magnitude ω, pointing upward according to the right-hand rule. A rider on the carousel walks radially across it at a constant speed, in what appears to the walker to be the straight line path inclined at 45° in Figure 5. To the stationary observer, however, the walker travels a spiral path. The points identified on both paths in Figure 5 correspond to the same times spaced at equal time intervals. We ask how two observers, one on the carousel and one in an inertial frame, formulate what they see using Newton's laws.

The observer at rest describes the path followed by the walker as a spiral. Adopting the coordinate system shown in Figure 5, the trajectory is described by r(t):

${\displaystyle \mathbf {r} (t)=R(t)\mathbf {u} _{R}={\begin{bmatrix}x(t)\\y(t)\end{bmatrix}}={\begin{bmatrix}R(t)\cos(\omega t+\pi /4)\\R(t)\sin(\omega t+\pi /4)\end{bmatrix}},}$

where the added π/4 sets the path angle at 45° to start with (just an arbitrary choice of direction), u_R is a unit vector in the radial direction pointing from the centre of the carousel to the walker at the time t. The radial distance R(t) increases steadily with time according to:

${\displaystyle R(t)=st,}$

with s the speed of walking. According to simple kinematics, the velocity is then the first derivative of the trajectory:

${\displaystyle {\begin{aligned}\mathbf {v} (t)&={\frac {dR}{dt}}{\begin{bmatrix}\cos(\omega t+\pi /4)\\\sin(\omega t+\pi /4)\end{bmatrix}}+\omega R(t){\begin{bmatrix}-\sin(\omega t+\pi /4)\\\cos(\omega t+\pi /4)\end{bmatrix}}\\&={\frac {dR}{dt}}\mathbf {u} _{R}+\omega R(t)\mathbf {u} _{\theta },\end{aligned}}}$

with u_θ a unit vector perpendicular to u_R at time t (as can be verified by noticing that the vector dot product with the radial vector is zero) and pointing in the direction of travel. The acceleration is the first derivative of the velocity:

${\displaystyle {\begin{aligned}\mathbf {a} (t)&={\frac {d^{2}R}{dt^{2}}}{\begin{bmatrix}\cos(\omega t+\pi /4)\\\sin(\omega t+\pi /4)\end{bmatrix}}+2{\frac {dR}{dt}}\omega {\begin{bmatrix}-\sin(\omega t+\pi /4)\\\cos(\omega t+\pi /4)\end{bmatrix}}-\omega ^{2}R(t){\begin{bmatrix}\cos(\omega t+\pi /4)\\\sin(\omega t+\pi /4)\end{bmatrix}}\\&=2s\omega {\begin{bmatrix}-\sin(\omega t+\pi /4)\\\cos(\omega t+\pi /4)\end{bmatrix}}-\omega ^{2}R(t){\begin{bmatrix}\cos(\omega t+\pi /4)\\\sin(\omega t+\pi /4)\end{bmatrix}}\\&=2s\ \omega \ \mathbf {u} _{\theta }-\omega ^{2}R(t)\ \mathbf {u} _{R}\,.\end{aligned}}}$

The last term in the acceleration is radially inward of magnitude ω² R, which is therefore the instantaneous centripetal acceleration of circular motion.[46] The first term is perpendicular to the radial direction, and pointing in the direction of travel. Its magnitude is 2sω, and it represents the acceleration of the walker as the edge of the carousel is neared, and the arc of the circle travelled in a fixed time increases, as can be seen by the increased spacing between points for equal time steps on the spiral in Figure 5 as the outer edge of the carousel is approached.

Applying Newton's laws, multiplying the acceleration by the mass of the walker, the inertial observer concludes that the walker is subject to two forces: the inward radially directed centripetal force and another force perpendicular to the radial direction that is proportional to the speed of the walker.

The rotating observer sees the walker travel a straight line from the centre of the carousel to the periphery, as shown in Figure 5. Moreover, the rotating observer sees that the walker moves at a constant speed in the same direction, so applying Newton's law of inertia, there is zero force upon the walker. These conclusions do not agree with the inertial observer. To obtain agreement, the rotating observer has to introduce fictitious forces that appear to exist in the rotating world, even though there is no apparent reason for them, no apparent gravitational mass, electric charge or what have you, that could account for these fictitious forces.

To agree with the inertial observer, the forces applied to the walker must be exactly those found above. They can be related to the general formulas already derived, namely:

${\displaystyle \mathbf {F} _{\mathrm {fict} }=-2m{\boldsymbol {\Omega }}\times \mathbf {v} _{\mathrm {B} }-m{\boldsymbol {\Omega }}\times ({\boldsymbol {\Omega }}\times \mathbf {x} _{\mathrm {B} })-m{\frac {d{\boldsymbol {\Omega }}}{dt}}\times \mathbf {x} _{\mathrm {B} }.}$

In this example, the velocity seen in the rotating frame is:

${\displaystyle \mathbf {v} _{\mathrm {B} }=s\mathbf {u} _{R},}$

with u_R a unit vector in the radial direction. The position of the walker as seen on the carousel is:

${\displaystyle \mathbf {x} _{\mathrm {B} }=R(t)\mathbf {u} _{R},}$

and the time derivative of Ω is zero for uniform angular rotation. Noticing that

${\displaystyle {\boldsymbol {\Omega }}\times \mathbf {u} _{R}=\omega \mathbf {u} _{\theta }}$

and

${\displaystyle {\boldsymbol {\Omega }}\times \mathbf {u} _{\theta }=-\omega \mathbf {u} _{R}\,,}$

we find:

${\displaystyle \mathbf {F} _{\mathrm {fict} }=-2m\omega s\mathbf {u} _{\theta }+m\omega ^{2}R(t)\mathbf {u} _{R}.}$

To obtain a straight-line motion in the rotating world, a force exactly opposite in sign to the fictitious force must be applied to reduce the net force on the walker to zero, so Newton's law of inertia will predict a straight line motion, in agreement with what the rotating observer sees. The fictitious forces that must be combated are the Coriolis force (first term) and the centrifugal force (second term). (These terms are approximate.[47]) By applying forces to counter these two fictitious forces, the rotating observer ends up applying exactly the same forces upon the walker that the inertial observer predicted were needed.

Because they differ only by the constant walking velocity, the walker and the rotational observer see the same accelerations. From the walker's perspective, the fictitious force is experienced as real, and combating this force is necessary to stay on a straight line radial path holding a constant speed. It's like battling a crosswind while being thrown to the edge of the carousel. [48]

Notice that this kinematical discussion does not delve into the mechanism by which the required forces are generated. That is the subject of kinetics. In the case of the carousel, the kinetic discussion would involve perhaps a study of the walker's shoes and the friction they need to generate against the floor of the carousel, or perhaps the dynamics of skateboarding if the walker switched to travel by skateboard. Whatever the means of travel across the carousel, the forces calculated above must be realized. A very rough analogy is heating your house: you must have a certain temperature to be comfortable, but whether you heat by burning gas or by burning coal is another problem. Kinematics sets the thermostat, kinetics fires the furnace.