Pyroelectric fusion

Pyroelectric fusion refers to the technique of using pyroelectric crystals to generate high strength electrostatic fields to accelerate deuterium ions (tritium might also be used someday) into a metal hydride target also containing deuterium (or tritium) with sufficient kinetic energy to cause these ions to undergo nuclear fusion. It was reported in April 2005 by a team at UCLA. The scientists used a pyroelectric crystal heated from −34 to 7 °C (−29 to 45 °F), combined with a tungsten needle to produce an electric field of about 25 gigavolts per meter to ionize and accelerate deuterium nuclei into an erbium deuteride target. Though the energy of the deuterium ions generated by the crystal has not been directly measured, the authors used 100 keV (a temperature of about 109 K) as an estimate in their modeling.[1] At these energy levels, two deuterium nuclei can fuse to produce a helium-3 nucleus, a 2.45 MeV neutron and bremsstrahlung. Although it makes a useful neutron generator, the apparatus is not intended for power generation since it requires far more energy than it produces.[2][3][4][5]

History

The process of light ion acceleration using electrostatic fields and deuterium ions to produce fusion in solid deuterated targets was first demonstrated by Cockcroft and Walton in 1932 (see Cockcroft–Walton generator). That process is used in miniaturized versions of their original accelerator, in the form of small sealed tube neutron generators, for petroleum exploration.

The process of pyroelectricity has been known from ancient times.[6] The first use of a pyroelectric field to accelerate deuterons was in a 1997 experiment conducted by Drs. V.D. Dougar Jabon, G.V. Fedorovich, and N.V. Samsonenko.[7] This group was the first to utilize a lithium tantalate (LiTaO3) pyroelectric crystal in fusion experiments.

The novel idea with the pyroelectric approach to fusion is in its application of the pyroelectric effect to generate accelerating electric fields. This is done by heating the crystal from −34 °C to +7 °C over a period of a few minutes.

Nuclear D-D fusion driven by pyroelectric crystals was proposed by Naranjo and Putterman in 2002.[8] It was also discussed by Brownridge and Shafroth in 2004.[9] The possibility of using pyroelectric crystals in a neutron production device (by D-D fusion) was proposed in a conference paper by Geuther and Danon in 2004[10] and later in a publication discussing electron and ion acceleration by pyroelectric crystals.[11] None of these later authors had prior knowledge of the earlier 1997 experimental work conducted by Dougar Jabon, Fedorovich, and Samsonenko which mistakenly believed that fusion occurred within the crystals.[7] The key ingredient of using a tungsten needle to produce sufficient ion beam current for use with a pyroelectric crystal power supply was first demonstrated in the 2005 Nature paper, although in a broader context tungsten emitter tips have been used as ion sources in other applications for many years. In 2010, it was found that tungsten emitter tips are not necessary to increase the acceleration potential of pyroelectric crystals; the acceleration potential can allow positive ions to reach kinetic energies between 300 and 310 keV.[12]

2005–2009

In April 2005, a UCLA team headed by chemistry professor James K. Gimzewski[13] and physics professor Seth Putterman utilized a tungsten probe attached to a pyroelectric crystal to increase the electric field strength.[14] Brian Naranjo, a graduate student working under Putterman, conducted the experiment demonstrating the use of a pyroelectric power source for producing fusion on a laboratory bench top device.[15] The device used a lithium tantalate (LiTaO3) pyroelectric crystal to ionize deuterium atoms and to accelerate the deuterons towards a stationary erbium dideuteride (ErD2) target. Around 1000 fusion reactions per second took place, each resulting in the production of an 820 keV helium-3 nucleus and a 2.45 MeV neutron. The team anticipates applications of the device as a neutron generator or possibly in microthrusters for space propulsion.

A team at Rensselaer Polytechnic Institute, led by Yaron Danon and his graduate student Jeffrey Geuther, improved upon the UCLA experiments using a device with two pyroelectric crystals and capable of operating at non-cryogenic temperatures.[16][17]

Pyroelectric fusion has been hyped in the news media,[18] which overlooked the work of Dougar Jabon, Fedorovich and Samsonenko.[7] Pyroelectric fusion is not related to the earlier claims of fusion reactions, having been observed during sonoluminescence (bubble fusion) experiments conducted under the direction of Rusi Taleyarkhan of Purdue University.[19] Naranjo of the UCLA team was one of the main critics of these earlier prospective fusion claims from Taleyarkhan.[20]

2010–present

The first successful results with pyroelectric fusion using a tritiated target was reported in 2010.[21] Putterman and Naranjo worked with T. Venhaus of Los Alamos National Laboratory to measure a 14.1 MeV neutron signal far above background.

See also

References
  1. "Supplementary methods for "Observation of nuclear fusion driven by a pyroelectric crystal"" (PDF).
  2. "UCLA Crystal Fusion". rodan.physics.ucla.edu.
  3. "Physics News Update 729". Archived from the original on November 12, 2013.
  4. Coming in out of the cold: nuclear fusion, for real | csmonitor.com
  5. "Nuclear fusion on the desktop ... really!". NBC News.
  6. Sidney Lang, "Pyroelectricity: From Ancient Curiosity to Modern Imaging Tool", Physics Today, August, 2005, pp. 31-36, and Sidney B. Lang, "Sourcebook of Pyroelectricity", (London: Gordon & Breach, 1974)
  7. Dougar Jabon, V.D.; Fedorovich, G.V.; Samsonenko, N.V. (1997). "Catalitically Induced D-D Fusion in Ferroelectrics". Brazilian Journal of Physics. 27 (4): 515–521. Bibcode:1997BrJPh..27..515D. doi:10.1590/s0103-97331997000400014.
  8. B. Naranjo and S. Putterman "Search for fusion from energy focusing phenomena in ferroelectric crystals" Archived 2006-05-13 at the Wayback Machine. UCEI Proposal, February 1, 2002
  9. James D. Brownridge and Stephen M. Shafroth, Archived 2006-09-03 at the Wayback Machine, 1 May 2004
  10. Jeffrey A. Geuther, Yaron Danon, “Pyroelectric Electron Acceleration: Improvements and Future Applications”, ANS Winter Meeting Washington, D.C, November 14 – 18, 2004
  11. "Double Crystal Fusion" Could Pave the Way for Portable Device, News Releases, Rensselaer Polytechnic Institute: 2005-2006: "NY Team Confirms UCLA Tabletop Fusion" Archived 2006-03-19 at the Wayback Machine. www.scienceblog.com
  12. Tornow, W.; Lynam, S. M.; Shafroth, S. M. (2010). "Substantial increase in acceleration potential of pyroelectric crystals". Journal of Applied Physics. 107 (6): 063302–063302–4. Bibcode:2010JAP...107f3302T. doi:10.1063/1.3309841. hdl:10161/3332.
  13. :: James K. Gimzewski ::. Chem.ucla.edu. Retrieved on 2013-08-16.
  14. B. Naranjo, J. K. Gimzewski and S. Putterman (from UCLA), "Observation of nuclear fusion driven by a pyroelectric crystal". Nature, April 28, 2005. See also a news article on this. Archived 2008-09-15 at the Wayback Machine
  15. Brian Naranjo, "Observation of Nuclear Fusion Driven by a Pyroelectric Crystal", A dissertation submitted in partial satisfaction of the requirements for the degree Doctor of Philosophy in Physics, University of California, Los Angeles, 2006, 57 pages, Dr. Seth Putterman, Committee Chair. No reference to the earlier experimental work of Jabon, Fedorovich and Samsonenko [2] is found in Dr. Naranjo's dissertation.
  16. Geuther, Jeffrey A.; Danon, Yaron (2005). "Electron and positive ion acceleration with pyroelectric crystals". Journal of Applied Physics. 97 (7): 074109–074109–5. Bibcode:2005JAP....97g4109G. doi:10.1063/1.1884252.
  17. Jeffrey A. Geuther, "Radiation Generation with Pyroelectric Crystals", A Thesis submitted to the Graduate Faculty of Rensselaer Polytechnic Institute in Partial Fulfillment of the Requirements for the degree of Doctor of Philosophy in Nuclear Engineering and Science, Rensselaer Polytechnic Institute, Troy, New York, April 13, 2007, 176 pages, Dr. Yaron Danon, Thesis Adviser.
  18. Matin Durrani and Peter Rodgers "Fusion seen in table-top experiment" Archived 2005-04-29 at the Wayback Machine. Physics Web, April 27, 2005
  19. Taleyarkhan, R. P.; West, C. D.; Lahey, R. T.; Nigmatulin, R. I.; Block, R. C.; Xu, Y. (2006). "Nuclear Emissions During Self-Nucleated Acoustic Cavitation". Physical Review Letters. 96 (3): 034301. Bibcode:2006PhRvL..96c4301T. doi:10.1103/physrevlett.96.034301. PMID 16486709.
  20. Naranjo, B. (2006). "Comment on "Nuclear Emissions During Self-Nucleated Acoustic Cavitation"". Physical Review Letters. 97 (14): 149403. arXiv:physics/0603060. Bibcode:2006PhRvL..97n9403N. doi:10.1103/physrevlett.97.149403. PMID 17155298. S2CID 31494419.
  21. Naranjo, B.; Putterman, S.; Venhaus, T. (2011). "Pyroelectric fusion using a tritiated target". Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 632 (1): 43–46. Bibcode:2011NIMPA.632...43N. doi:10.1016/j.nima.2010.08.003.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.