Rice mill

Paddy is collected from the fields to be processed. The paddy is again rechecked before the process begins. The procured paddy is checked bag by bag by a team and stored in Paddy Milling Plants.

To start with the production process, paddy is cleaned by a paddy pre-cleaning machine and the cleaned paddy is stored in raw paddy storage bins. The stored paddy is moved to food-grade stainless steel soaking tanks. Water is drained from the tank and the wet paddy is ready for boiling.

Boiling is done by a steam boiler. The boiled paddy is then moved to the paddy dryer through a belt conveyor.

The boiled wet paddy is dried in a food-grade stainless steel paddy drier using hot air. The heat energy for the drier is generated using a heat exchanger that uses steam from the boiler. Using a steam heat exchanger will sustain the real aroma of the paddy. These are indirect heat exchangers so there is no chance of smoke air entering the drier. The dried paddy is ready for hulling.

The paddy is pre-cleaned again and destoned by a pre-cleaning machine. After cleaning the paddy is moved to dehusker called sheller. The outer covering of the paddy, the husk is removed here and is used as a fuel for the boiler. The whole rice is collected from the Sheller and moved on to whitener. Here, The film coat on the rice which is called bran is removed from the rice and the bran is collected separately. The whitening process is done by a whitener . The whitened rice is polished by a silky polisher. The polished rice is destoned by a destoner and the broken rice is separated by a length grader.

The polished full-grain rice is sorted in a colour sorter which removes black rice, yellow rice, and white belly. Then, the rice is moved to the packing section.

Packing

The processed rice is then packed in woven sacks and is ready to be sold in the market

• Rice huller
• Rice polisher

• History: Rice Mill – Satake India