Rolls-Royce Silver Shadow

The Silver Shadow was originally intended to be called Rolls-Royce Silver Mist, but was replaced with Silver Shadow at the last minute due to Mist meaning "manure" or "crap" in German.[4][5] It was designed with several modernisations in response to concerns that the company was falling behind in automotive innovation, most notably in its unitary construction.

Style-wise, the John Polwhele Blatchley design was a major departure from its predecessor, the Silver Cloud. More than 50% of Silver Clouds had been sold on the domestic market where, by the standards of much of Europe and most of North America, roads were narrow and crowded.[6] The new Shadow was 3+1⁄2 inches (8.9 cm) narrower and 7 inches (18 cm) shorter than the Silver Cloud, but nevertheless managed to offer increased passenger and luggage space, thanks to more efficient space utilisation made possible by unitary construction[6] and a full-width, slab-sided body design.

Other new features included disc brakes replacing drums, and independent rear suspension instead of the outdated live rear axle design of previous Rolls-Royce models.

The standard wheelbase Silver Shadow measured 203.5 inches (5,170 mm), 4,700 lb (2,100 kg) and had a book price of £6,557[7] in the first year of production.

The Shadow featured a 172 hp (128 kW) 6.2 L V8 from 1965 to 1969, and a 189 hp (141 kW) 6.75 L V8 from 1970 to 1980. No official power outputs were stated, but registration authorities in many markets required outputs be listed. Left-hand-drive models were coupled to the recently introduced Turbo-Hydramatic 400 automatic gearbox sourced from General Motors (GM). Pre-1970, right-hand-drive (RHD) models used a highly modified, aluminum-cased version of the original cast-iron 4-speed Hydra-Matic gearbox that had been built in Crewe under license from GM since 1953. From 1968, export RHD cars gained the Turbo-Hydramatic 400, and by 1970, the 4-speed unit had been completely phased out even in the home market.[8]

A distinctive feature was a high-pressure hydropneumatic suspension system licensed from Citroën, with dual-circuit braking and hydraulic self-levelling suspension. At first, both the front and rear of the car were controlled by the levelling system; the front levelling was deleted in 1969 as it had been determined that the rear levelling did almost all the work.[9] Rolls-Royce achieved a high degree of ride quality with this arrangement.

• 
  1968 Rolls-Royce Silver Shadow
• 
  1972 Silver Shadow interior
• 
  Front grille (top) of a 1972 Silver Shadow, showing Rolls-Royce's trademark bonnet mascot, and the double R logo below it
• 
  Side profile close-up of the "Spirit of Ecstasy" / "Flying Lady" mascot of a 1972 Silver Shadow

A two-door saloon was introduced early in 1966, followed by a convertible in 1967.[1] There are two different versions of the two-door saloon – the more common Mulliner Park Ward, featuring a raked C-pillar and swooping rear bumper line, and the very rare early James Young model reflecting the more formal 4-door that was only built in thirty-five Rolls-Royce examples (with another fifteen Bentleys), discontinued in 1967.

The convertible variant, by Mulliner Park Ward and similar in style to its 2-door saloon, was marketed as the Silver Shadow Drophead Coupé.[10]

• 
  1967 Silver Shadow two-door saloon by Mulliner Park Ward
• 
  1967 Silver Shadow two-door saloon by James Young
• 
  1967 Silver Shadow Drophead Coupé by Mulliner Park Ward

1979 Silver Shadow II

Silver Shadow II Rear

In 1977, the model was renamed the Silver Shadow II in recognition of several major changes, most notably rack and pinion steering; modifications to the front suspension improved handling markedly.

Externally, the bumpers were changed from chrome to alloy and rubber starting with the late 1976 Silver Shadows. These new energy-absorbing bumpers had been used in the United States since 1974, as a response to tightening safety standards there. Nonetheless, the bumpers on cars sold outside of North America were still solidly mounted and protruded 2 in (5 cm) less.[11] Also now made standard across the board was the deletion of the small grilles mounted beneath the headlamps. Outside of North America, where tall kerbs and the like demanded more ground clearance, a front skirt was also fitted to the Silver Shadow II and its sister cars.

In 1979 75 Silver Shadow IIs were specially fitted to commemorate the 75th anniversary of the company with the original red "RR" badges front and rear, pewter/silver paint, grey leather with red piping, scarlet red carpets, and a silver commemorative placard on the inside of the glove box door. Thirty-three of these were designated for and shipped to the North American market.

Rolls-Royce Silver Wraith II (North America)

The smaller, more formal rear window of the Silver Wraith II

Rolls-Royce considered offering a more exclusive, long-wheelbase Phantom VII model based on the Silver Shadow, but production was not pursued and no prototypes were built.[12] Instead, a pilot series of ten stretched-wheelbase “limousines” - which offered an additional 4 inches of rear seat legroom - was built in 1967 and sold, one of them to Princess Margaret.[13]

This long-wheelbase variant was offered in the United States from May 1969, and available to domestic customers from early 1970.[14]

Some extended-wheelbase models were fitted with an electrically retractable privacy glass divider. Outside of North America, the cars with a divider were fitted with a separate air conditioning unit mounted in the boot - North American safety laws made this impossible, as the petrol tank would have had to be relocated. The cars with a divider lost the entire gain in wheelbase, trading off extra legroom for privacy.

Initially, the long-wheelbase model did not have a separate name, but with the introduction of the Silver Shadow II in 1976 the longer car was dubbed the Silver Wraith II.

The Silver Wraith II is identified by all alterations found on the Silver Shadow II and additionally an Everflex-covered roof (also available as an option on the Silver Shadow II), a smaller, more formal rear window, and different wheel covers.

The Rolls-Royce factory built a special stretch limousine on Silver Wraith basis in 1979. It was ordered by the religious leader Bhagwan Shree Rajneesh, who had a collection of 93 Rolls-Royces.[15][16]

In 1971 the Silver Shadow two door models were given the separate identity of Corniche (with either Rolls-Royce or Bentley badging), and eventually went on to outlive the Silver Shadow by some years with production lasting until 1982 for the coupé and 1996 for the convertible.

Another coupé variant on the Shadow platform was the Camargue, with bodywork designed by the Italian firm Pininfarina, and production running from 1975 to 1986. The Camargue had the distinction of being the most expensive production Rolls-Royce.

A Bentley version of the Shadow, known as the Bentley T (and Bentley T2 from 1977), was also made. It was mechanically identical and differed only in the badging and design of the radiator shell. The more rounded radiator also required a slightly reshaped bonnet profile. Other modifications were only slight cosmetic ones, a different front bumper and hubcaps. Engine valve covers with a "Bentley" logo were only used when the factory had them available.

The long-wheelbase version of the Bentley T did not have a separate identity and was simply called T long-wheelbase or T2 long-wheelbase. Only a very few of these were built (9 and 10 examples respectively, less than 0.4% of the total long-wheelbase production).

All two-door cars were also available as Bentleys. However, only one example of a Bentley Camargue was ever produced.