Salto Santiago Hydroelectric Power Plant
The Salto Santiago Hydroelectric Power Plant is a dam and hydroelectric power plant on the Iguazu River near Santiago in Paraná, Brazil. It is the third dam upstream of the Iguazu Falls and was completed in 1979.[1][2] The power station has a 1,420 MW capacity and is supplied with water by a rock-fill embankment dam.
| Salto Santiago Dam | |
|---|---|
  Location of Salto Santiago Dam in Brazil | |
| Official name | Salto Santiago Hydroelectric Power Plant |
| Location | Saudade do Iguaçu, Paraná, Brazil |
| Coordinates | 25°37′04″S 52°36′48″W |
| Opening date | 1980 |
| Owner(s) | Tractebel Energia |
| Dam and spillways | |
| Type of dam | Embankment, rock-fill |
| Impounds | Iguazu River |
| Height | 80 m (260 ft) |
| Length | 1,400 m (4,600 ft) |
| Dam volume | 518,200 m3 (18,300,000 cu ft) (Concrete) |
| Spillway type | Service, controlled |
| Spillway capacity | 24,000 m3/s (850,000 cu ft/s) |
| Reservoir | |
| Creates | Salto Santiago Reservoir |
| Total capacity | 4,094,000,000 m3 (3,319,000 acre⋅ft) |
| Catchment area | 43,330 km2 (16,730 sq mi) |
| Surface area | 208 km2 (80 sq mi) |
| Power Station | |
| Commission date | 1980-1982 |
| Type | Conventional |
| Turbines | 4 x 355 MW (476,000 hp) Francis turbines |
| Installed capacity | 1,420 MW (1,900,000 hp) |
| Annual generation | 2,137.46 GWh (7,694.9 TJ) |
It is owned and operated by Tractebel Energia.
Salto Santiago Dam
The Salto Santiago Dam is 80 metres (260 ft) high, 1,400 metres (4,600 ft) long and is of rock-fill embankment type, comprising 518,200 cubic metres (18,300,000 cu ft) in concrete structure. The dam's spillways contains nine 21.5-metre (71 ft) wide and 15.3-metre (50 ft) wide radial gates and has a maximum capacity of 24,000 cubic metres per second (850,000 cu ft/s). The reservoir formed behind the dam contains 4,094,000,000 cubic metres (3,319,000 acre⋅ft) of total storage with a surface area of 208 square kilometres (80 sq mi) and a catchment area of 43,330 square kilometres (16,730 sq mi). The average flow of the river through the dam is 902 cubic metres per second (31,900 cu ft/s) and the reservoir has a normal operating level of 506 metres (1,660 ft).[3]
Power plant
The power plant at the southern end of the dam contains four 355 megawatts (476,000 hp) hydroelectric generators powered by Francis turbines. Each turbine has a rated discharge of 346 cubic metres per second (12,200 cu ft/s) and is fed by a 7.6-metre (25 ft) diameter steel penstock which provides a gross hydraulic head of 106 metres (348 ft). The remaining two penstocks are intended for future generators with a plant expansion. The first generator was commissioned on December 31, 1980, with another in 1981, two in 1982 the last of which was commissioned on September 16, 1982.[3][4]
References
- "Parana River Basin Study Area - Figure 1". The Scientific Electronic Library Online. Archived from the original on 11 October 2012. Retrieved 11 September 2010.
- Valente, Marcela (March 30, 2009). "Planned Dam Above Famous Falls Draws Fire". IPS. Archived from the original on 10 June 2011. Retrieved 11 September 2010.
- "Technical Specs - HPP Salto Santiago - UHSS". Tractebel Energia. Retrieved 11 September 2010.
- "Salto Santiago Hydroelectric Plant - PR" (in Portuguese). Ministry of Transport. 2003. Archived from the original on 20 September 2009. Retrieved 11 September 2010.
