Santana 25
The Santana 25 is an American trailerable sailboat that was designed by W. Shad Turner as an International Offshore Rule Quarter Ton class racer and first built in 1973. The boat was Turner's first design.[1][2][3][4]
Development | |
---|---|
Designer | W. Shad Turner |
Location | United States |
Year | 1973 |
No. built | 160 |
Builder(s) | W. D. Schock Corp |
Role | Racer |
Name | Santana 25-1 |
Boat | |
Displacement | 4,050 lb (1,837 kg) |
Draft | 4.08 ft (1.24 m) |
Hull | |
Type | monohull |
Construction | fiberglass |
LOA | 24.58 ft (7.49 m) |
LWL | 19.50 ft (5.94 m) |
Beam | 7.82 ft (2.38 m) |
Engine type | outboard motor |
Hull appendages | |
Keel/board type | fin keel |
Ballast | 1,800 lb (816 kg) |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 31.16 ft (9.50 m) |
J foretriangle base | 10.00 ft (3.05 m) |
P mainsail luff | 27.00 ft (8.23 m) |
E mainsail foot | 7.83 ft (2.39 m) |
Sails | |
Sailplan | masthead sloop |
Mainsail area | 105.71 sq ft (9.821 m2) |
Jib/genoa area | 155.80 sq ft (14.474 m2) |
Total sail area | 261.51 sq ft (24.295 m2) |
Racing | |
PHRF | 222 |
Production
The design was built by W. D. Schock Corp in the United States, from 1973 to 1977 but it is now out of production.[1][2][4][5]
Design
The Santana 25 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, a raked stem, a reverse transom, a transom-hung rudder controlled by a tiller and a fixed fin keel or swing keel. The fixed keel model displaces 4,050 lb (1,837 kg) and carries 1,800 lb (816 kg) of ballast, while the swing keel model displaces 3,600 lb (1,633 kg) and carries 1,370 lb (621 kg) of ballast. The swing keel model also has less sail area.[1][2][4]
The keel-equipped version of the boat has a draft of 4.08 ft (1.24 m), while the swing keel-equipped version has a draft of 5.5 ft (1.7 m) with the centerboard extended and 2.58 ft (0.79 m) with it retracted, allowing operation in shallow water, beaching or ground transportation on a trailer.[1][2][4]
The boat is normally fitted with a small 6 to 8 hp (4 to 6 kW) outboard motor for docking and maneuvering.[1][4]
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two straight settees in the main cabin along with a swing table. The galley is located on both sides at the companionway ladder. The head is located just aft of the bow cabin on the starboard side. Cabin headroom is 62 in (157 cm).[1][4]
The design has a PHRF racing average handicap of 222 and a hull speed of 5.9 kn (10.9 km/h).[4]
Variants
Operational history
The boat is supported by an active class club that organizes racing events, the Quarter Ton Class.[7]
See also
References
- McArthur, Bruce (2021). "Santana 25-1 sailboat". sailboatdata.com. Archived from the original on 20 December 2021. Retrieved 20 December 2021.
- McArthur, Bruce (2021). "Santana 25-2 sailboat". sailboatdata.com. Archived from the original on 20 December 2021. Retrieved 20 December 2021.
- McArthur, Bruce (2021). "W. Shad Turner". sailboatdata.com. Archived from the original on 29 August 2020. Retrieved 20 December 2021.
- Henkel, Steve: The Sailor's Book of Small Cruising Sailboats, page 366. International Marine/McGraw-Hill, 2010. ISBN 978-0-07-163652-0
- McArthur, Bruce (2020). "Schock W.D." sailboatdata.com. Archived from the original on 18 July 2020. Retrieved 20 December 2021.
- W. D. Schock Corp. "Boats built by W.D. Schock". wdschock.com. Archived from the original on 21 February 2010. Retrieved 9 August 2022.
- McArthur, Bruce (2021). "Quarter Ton Class". sailboatdata.com. Archived from the original on 20 December 2021. Retrieved 20 December 2021.