Ironworks

An ironworks or iron works is an industrial plant where iron is smelted and where heavy iron and steel products are made. The term is both singular and plural, i.e. the singular of ironworks is ironworks.

For other uses, see Ironworks (disambiguation).
The Iron Rolling Mill (Eisenwalzwerk), 1870s, by Adolph Menzel.
Casting at an iron foundry: From Fra Burmeister og Wain's Iron Foundry, 1885 by Peder Severin Krøyer

Ironworks succeeded bloomeries when blast furnaces replaced former methods. An integrated ironworks in the 19th century usually included one or more blast furnaces and a number of puddling furnaces or a foundry with or without other kinds of ironworks. After the invention of the Bessemer process, converters became widespread, and the appellation steelworks replaced ironworks.

The processes carried at ironworks are usually described as ferrous metallurgy, but the term siderurgy is also occasionally used. This is derived from the Greek words sideros - iron and ergon or ergos - work. This is an unusual term in English, and it is best regarded as an anglicisation of a term used in French, Spanish, and other Romance languages.

Historically, it is common that a community was built around the ironworks where the people living there were dependent on the ironworks to provide jobs and housing. [1] As the ironworks closed down (or was industrialised) these villages quite often went into decline and experienced negative economic growth. [2]

Varieties of ironworks

Primary ironmaking
Main article: Ferrous metallurgy
A South Wales iron mill in 1798
Blast furnaces of Třinec Iron and Steel Works.
Toronto rolling mills

Ironworks is used as an omnibus term covering works undertaking one or more iron-producing processes.[3] Such processes or species of ironworks where they were undertaken include the following:

  • Blast furnaces — which made pig iron (or sometimes finished cast iron goods) from iron ore;
  • Bloomeries — where bar iron was produced from iron ore by direct reduction;
  • Electrolytic smelting — Employs a chromium/iron anode that can survive a 2,850 °F (1,570 °C) to produce decarbonized iron and 2/3 of a ton of industrial-quality oxygen per ton of iron. A thin film of metal oxide forms on the anode in the intense heat. The oxide forms a protective layer that prevents excess consumption of the base metal.[4]
  • Finery forges — which fined pig iron to produce bar iron, using charcoal as fuel in a finery (hearth) and coal or charcoal in a chafery (hearth);
  • Foundries — where pig iron was remelted in an air furnace or in a foundry cupola to produce cast iron goods;
  • Potting and stamping forges with melting fineries using the first process in which bar iron was made from pig iron with mineral coal or coke, without the use of charcoal;
  • Puddling furnaces — a later process for the same purpose, again with coke as fuel. It was usually necessary for there to be a preliminary refining process in a coke refinery (also called running out furnace). After puddling, the puddled ball needed shingling and then to be drawn out into bar iron in a rolling mill.

Modern steelmaking
Main articles: Steel mill and Steelmaking
The ironworks of Dalsbruk in Kimitoön, Finland

From the 1850s, pig iron might be partly decarburised to produce mild steel using one of the following:[5]

The mills operating converters of any type are better called steelworks, ironworks referring to former processes, like puddling.

Further processing

After bar iron had been produced in a finery forge or in the forge train of a rolling mill, it might undergo further processes in one of the following:

  • A slitting mill - which cut a flat bar into rod iron suitable for making into nails.
  • A tinplate works - where rolling mills made sheets of iron (later of steel), which were coated with tin.
  • A plating forge with a tilt hammer, a lighter hammer with a rapid stroke rate, enabling the production of thinner iron, suitable for the manufacture of knives, other cutlery, and so on.
  • A cementation furnace might be used to convert the bar iron (if it was pure enough) into blister steel by the cementation process, either as an end in itself or as the raw material for crucible steel.

Manufacture

Most of these processes did not produce finished goods. Further processes were often manual, including

In the context of the iron industry, the term manufacture is best reserved for this final stage.

Notable ironworks
Coat of arms of Eisenhüttenstadt ("city of ironworks"), Germany
Main article: List of steel producers

The notable ironworks of the world are described here by country. See above for the largest producers and the notable ironworks in the alphabetical order.

South Africa

United States

China

India

Japan

The largest Japanese steel companies' main works are as follows:

Korea

Vietnam

Czech Republic

Germany

Great Britain
See also: List of ironworks in Wales

Italy
  • Cogne acciai speciali, Aosta (example of a mountain steel meel)
  • Ferreira di Servola, Trieste (operating since 1896)
  • Acciaieria di Piombino
  • Società Italiana Acciaierie Cornigliano di Cornigliano, Genova
  • Acciai speciali Termi, now ThyssenKrupp Terni
  • Acciaieria di Bagnoli, Napoli
  • Acciaieria di Taranto (biggest Integrated steel mill in Europe)

Sweden

Russia

Spain

Historical

References
Wikimedia Commons has media related to Ironworks.
  1. Roos, Annie (2021). "Reproducing gender - The spatial context of gender in entrepreneurship". pub.epsilon.slu.se. Retrieved 2022-04-21.
  2. Roos, Annie; Gaddefors, Johan (2022-04-07). "In the wake of the ironworks - entrepreneurship and the spatial connections to empowerment and emancipation". The International Journal of Entrepreneurship and Innovation: 146575032210898. doi:10.1177/14657503221089802. ISSN 1465-7503. S2CID 248043339.
  3. Hayman, Richard (2005). Ironmaking: History and Archaeology of the British Iron Industry. History Press.
  4. "A new iron age?". The Why Files. 2013-05-09. Retrieved 2014-02-06.
  5. Ghosh, Ahindra; Chatterjee, Amit (2008). Ironmaking and Steelmaking: Theory and Practice. Prentice-Hall of India.
  6. Deaux, Joe (2019-12-20). "U.S. Steel to cut 1,545 Michigan jobs as weakness overwhelms Trump's protection". Los Angeles Times. Retrieved 2019-12-21.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.