Six-dimensional space

A polytope in six dimensions is called a 6-polytope. The most studied are the regular polytopes, of which there are only three in six dimensions: the 6-simplex, 6-cube, and 6-orthoplex. A wider family are the uniform 6-polytopes, constructed from fundamental symmetry domains of reflection, each domain defined by a Coxeter group. Each uniform polytope is defined by a ringed Coxeter–Dynkin diagram. The 6-demicube is a unique polytope from the D₆ family, and 2₂₁ and 1₂₂ polytopes from the E₆ family.

Uniform polytopes in six dimensions
(Displayed as orthogonal projections in each Coxeter plane of symmetry)

A6	B6		D6	E6
6-simplex {3,3,3,3,3}	6-cube {4,3,3,3,3}	6-orthoplex {3,3,3,3,4}	6-demicube = {3,33,1} = h{4,3,3,3,3}	221 = {3,3,32,1}	122 = {3,32,2}

The 5-sphere, or hypersphere in six dimensions, is the five-dimensional surface equidistant from a point. It has symbol S⁵, and the equation for the 5-sphere, radius r, centre the origin is

${\displaystyle S^{5}=\left\{x\in \mathbb {R} ^{6}:\|x\|=r\right\}.}$

The volume of six-dimensional space bounded by this 5-sphere is

${\displaystyle V_{6}={\frac {\pi ^{3}r^{6}}{6}}}$

which is 5.16771 × r⁶, or 0.0807 of the smallest 6-cube that contains the 5-sphere.

The 6-sphere, or hypersphere in seven dimensions, is the six-dimensional surface equidistant from a point. It has symbol S⁶, and the equation for the 6-sphere, radius r, centre the origin is

${\displaystyle S^{6}=\left\{x\in \mathbb {R} ^{7}:\|x\|=r\right\}.}$

The volume of the space bounded by this 6-sphere is

${\displaystyle V_{7}={\frac {16\pi ^{3}r^{7}}{105}}}$

which is 4.72477 × r⁷, or 0.0369 of the smallest 7-cube that contains the 6-sphere.

In three dimensional space a rigid transformation has six degrees of freedom, three translations along the three coordinate axes and three from the rotation group SO(3). Often these transformations are handled separately as they have very different geometrical structures, but there are ways of dealing with them that treat them as a single six-dimensional object.

In screw theory angular and linear velocity are combined into one six-dimensional object, called a twist. A similar object called a wrench combines forces and torques in six dimensions. These can be treated as six-dimensional vectors that transform linearly when changing frame of reference. Translations and rotations cannot be done this way, but are related to a twist by exponentiation.

Phase portrait of the Van der Pol oscillator

Phase space is a space made up of the position and momentum of a particle, which can be plotted together in a phase diagram to highlight the relationship between the quantities. A general particle moving in three dimensions has a phase space with six dimensions, too many to plot but they can be analysed mathematically.[1]

The rotation group in four dimensions, SO(4), has six degrees of freedom. This can be seen by considering the 4 × 4 matrix that represents a rotation: as it is an orthogonal matrix the matrix is determined, up to a change in sign, by e.g. the six elements above the main diagonal. But this group is not linear, and it has a more complex structure than other applications seen so far.

Another way of looking at this group is with quaternion multiplication. Every rotation in four dimensions can be achieved by multiplying by a pair of unit quaternions, one before and one after the vector. These quaternion are unique, up to a change in sign for both of them, and generate all rotations when used this way, so the product of their groups, S³ × S³, is a double cover of SO(4), which must have six dimensions.

Although the space we live in is considered three-dimensional, there are practical applications for four-dimensional space. Quaternions, one of the ways to describe rotations in three dimensions, consist of a four-dimensional space. Rotations between quaternions, for interpolation, for example, take place in four dimensions. Spacetime, which has three space dimensions and one time dimension is also four-dimensional, though with a different structure to Euclidean space.

In electromagnetism, the electromagnetic field is generally thought of as being made of two things, the electric field and magnetic field. They are both three-dimensional vector fields, related to each other by Maxwell's equations. A second approach is to combine them in a single object, the six-dimensional electromagnetic tensor, a tensor- or bivector-valued representation of the electromagnetic field. Using this Maxwell's equations can be condensed from four equations into a particularly compact single equation:

${\displaystyle \partial \mathbf {F} =\mathbf {J} \,}$

where F is the bivector form of the electromagnetic tensor, J is the four-current and ∂ is a suitable differential operator.[2]

Calabi–Yau manifold (3D projection)

In physics string theory is an attempt to describe general relativity and quantum mechanics with a single mathematical model. Although it is an attempt to model our universe it takes place in a space with more dimensions than the four of spacetime that we are familiar with. In particular a number of string theories take place in a ten-dimensional space, adding an extra six dimensions. These extra dimensions are required by the theory, but as they cannot be observed are thought to be quite different, perhaps compactified to form a six-dimensional space with a particular geometry too small to be observable.

Since 1997 another string theory has come to light that works in six dimensions. Little string theories are non-gravitational string theories in five and six dimensions that arise when considering limits of ten-dimensional string theory.[3]

A number of the above applications can be related to each other algebraically by considering the real, six-dimensional bivectors in four dimensions. These can be written Λ²ℝ⁴ for the set of bivectors in Euclidean space or Λ²ℝ^3,1 for the set of bivectors in spacetime. The Plücker coordinates are bivectors in ℝ⁴ while the electromagnetic tensor discussed in the previous section is a bivector in ℝ^3,1. Bivectors can be used to generate rotations in either ℝ⁴ or ℝ^3,1 through the exponential map (e.g. applying the exponential map of all bivectors in Λ²ℝ⁴ generates all rotations in ℝ⁴). They can also be related to general transformations in three dimensions through homogeneous coordinates, which can be thought of as modified rotations in ℝ⁴.

The bivectors arise from sums of all possible wedge products between pairs of 4-vectors. They therefore have C4
2  = 6 components, and can be written most generally as

${\displaystyle \mathbf {B} =B_{12}\mathbf {e} _{12}+B_{13}\mathbf {e} _{13}+B_{14}\mathbf {e} _{14}+B_{23}\mathbf {e} _{23}+B_{24}\mathbf {e} _{24}+B_{34}\mathbf {e} _{34}}$

They are the first bivectors that cannot all be generated by products of pairs of vectors. Those that can are simple bivectors and the rotations they generate are simple rotations. Other rotations in four dimensions are double and isoclinic rotations and correspond to non-simple bivectors that cannot be generated by single wedge product.[4]

6-vectors are simply the vectors of six-dimensional Euclidean space. Like other such vectors they are linear, can be added subtracted and scaled like in other dimensions. Rather than use letters of the alphabet, higher dimensions usually use suffixes to designate dimensions, so a general six-dimensional vector can be written a = (a₁, a₂, a₃, a₄, a₅, a₆). Written like this the six basis vectors are (1, 0, 0, 0, 0, 0), (0, 1, 0, 0, 0, 0), (0, 0, 1, 0, 0, 0), (0, 0, 0, 1, 0, 0), (0, 0, 0, 0, 1, 0) and (0, 0, 0, 0, 0, 1).

Of the vector operators the cross product cannot be used in six dimensions; instead, the wedge product of two 6-vectors results in a bivector with 15 dimensions. The dot product of two vectors is

${\displaystyle \mathbf {a} \cdot \mathbf {b} =a_{1}b_{1}+a_{2}b_{2}+a_{3}b_{3}+a_{4}b_{4}+a_{5}b_{5}+a_{6}b_{6}.}$

It can be used to find the angle between two vectors and the norm,

${\displaystyle \left|\mathbf {a} \right\vert ={\sqrt {\mathbf {a} \cdot \mathbf {a} }}={\sqrt {{a_{1}}^{2}+{a_{2}}^{2}+{a_{3}}^{2}+{a_{4}}^{2}+{a_{5}}^{2}+{a_{6}}^{2}}}.}$

This can be used for example to calculate the diagonal of a 6-cube; with one corner at the origin, edges aligned to the axes and side length 1 the opposite corner could be at (1, 1, 1, 1, 1, 1), the norm of which is

${\displaystyle {\sqrt {1+1+1+1+1+1}}={\sqrt {6}}=2.4495,}$

which is the length of the vector and so of the diagonal of the 6-cube.

In 1901 J.W. Gibbs published a work on vectors that included a six-dimensional quantity he called a bivector. It consisted of two three-dimensional vectors in a single object, which he used to describe ellipses in three dimensions. It has fallen out of use as other techniques have been developed, and the name bivector is now more closely associated with geometric algebra.[5]